Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 25 8月, 2008 2 次提交
    • Y
      x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3 · a2bd7274
      由 Yinghai Lu 提交于 
      David Witbrodt tracked down (and bisected) a hpet bootup hang on his
system to the following problem: a BIOS bug made the hpet device
visible as a generic PCI device. If e820 reserved entries happen to
be registered first in the resource tree [which v2.6.26 started doing],
then the PCI code will reallocate that device's BAR to some other
address - breaking timer IRQs and hanging the system.

( Normally hpet devices are hidden by the BIOS from the OS's PCI
  discovery via chipset magic. Sometimes the hpet is not a PCI device
  at all. )

Solve this fundamental fragility by making non-PCI platform drivers
insert resources into the resource tree even if it overlaps the e820
reserved entry, to keep the resource manager from updating the BAR.

Also do these checks for the ioapic and mmconfig addresses, and emit
a warning if this happens.
Bisected-by: NDavid Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Tested-by: NDavid Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a2bd7274
    • L
      x86: do not enable TSC notifier if we don't need it · 060700b5
      由 Linus Torvalds 提交于 
      Impact: crash on non-TSC-equipped CPUs

Don't enable the TSC notifier if we *either*:

1. don't have a CPU, or
2. have a CPU with constant TSC.

In either of those cases, the notifier is either damaging (1) or useless(2).

From: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      060700b5
  3. 23 8月, 2008 3 次提交
    • R
      x86 MCE: Fix CPU hotplug problem with multiple multicore AMD CPUs · 8735728e
      由 Rafael J. Wysocki 提交于 
      During CPU hot-remove the sysfs directory created by
threshold_create_bank(), defined in
arch/x86/kernel/cpu/mcheck/mce_amd_64.c, has to be removed before
its parent directory, created by mce_create_device(), defined in
arch/x86/kernel/cpu/mcheck/mce_64.c .  Moreover, when the CPU in
question is hotplugged again, obviously the latter has to be created
before the former.  At present, the right ordering is not enforced,
because all of these operations are carried out by CPU hotplug
notifiers which are not appropriately ordered with respect to each
other.  This leads to serious problems on systems with two or more
multicore AMD CPUs, among other things during suspend and hibernation.

Fix the problem by placing threshold bank CPU hotplug callbacks in
mce_cpu_callback(), so that they are invoked at the right places,
if defined.  Additionally, use kobject_del() to remove the sysfs
directory associated with the kobject created by
kobject_create_and_add() in threshold_create_bank(), to prevent the
kernel from crashing during CPU hotplug operations on systems with
two or more multicore AMD CPUs.

This patch fixes bug #11337.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NAndi Kleen <andi@firstfloor.org>
Tested-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8735728e
    • R
      x86: fix: make PCI ECS for AMD CPUs hotplug capable · 91ede005
      由 Robert Richter 提交于 
      Until now, PCI ECS setup was performed at boot time only and for cpus
that are enabled then. This patch fixes this and adds cpu hotplug.

Tests sequence (check if ECS bit is set when bringing cpu online again):

 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00404010
 # ( perl -e 'sysseek(STDOUT, 0xC001001F, 0); print pack "l*", 8, 0x00400010' ) > /dev/cpu/1/msr
 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00400010
 # echo 0 > /sys/devices/system/cpu/cpu1/online
 # echo 1 > /sys/devices/system/cpu/cpu1/online
 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00404010
Reported-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      91ede005
    • R
      x86: fix: do not run code in amd_bus.c on non-AMD CPUs · 9b4e27b5
      由 Robert Richter 提交于 
      Jan Beulich wrote:

> Even worse - this would even try to access the MSR on non-AMD CPUs
> (currently probably prevented just by the fact that only AMD ones use
> family values of 0x10 or higher).

This patch adds cpu vendor check to the postcore_initcalls.
Reported-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9b4e27b5
  5. 22 8月, 2008 6 次提交
    • I
      x86: work around MTRR mask setting, v2 · 9754a5b8
      由 Ingo Molnar 提交于 
      improve the debug printout:

- make it actually display something
- print it only once

would be nice to have a WARN_ONCE() facility, to feed such things to
kerneloops.org.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9754a5b8
    • M
      x86: fix section mismatch warning - uv_cpu_init · c4bd1fda
      由 Marcin Slusarz 提交于 
      WARNING: vmlinux.o(.cpuinit.text+0x3cc4): Section mismatch in reference from the function uv_cpu_init() to the function .init.text:uv_system_init()
The function __cpuinit uv_cpu_init() references
a function __init uv_system_init().
If uv_system_init is only used by uv_cpu_init then
annotate uv_system_init with a matching annotation.

uv_system_init was ment to be called only once, so do it from codepath
(native_smp_prepare_cpus) which is called once, right before activation
of other cpus (smp_init).

Note: old code relied on uv_node_to_blade being initialized to 0,
but it'a not initialized from anywhere.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c4bd1fda
    • A
      x86: fix VMI for early params · 3a6ddd5f
      由 Alok Kataria 提交于 
      while fixing a different bug i moved the call to vmi_init before
early params could be parsed.

This broke the vmi specific commandline parameters.
Fix that, by moving vmi initialization after kernel has got a chance to
parse early parameters.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3a6ddd5f
    • J
      x86: fix two modpost warnings in mm/init_64.c · 9482ac6e
      由 Jan Beulich 提交于 
      early_io{re,un}map() are __init and hence can't be called from __meminit
functions.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9482ac6e
    • J
      x86: fix 1:1 mapping init on 64-bit (memory hotplug case) · 8ae3a5a8
      由 Jan Beulich 提交于 
      While I don't have a hotplug capable system at hand, I think two issues need
fixing:

- pud_phys (in kernel_physical_ampping_init()) would remain uninitialized in
  the after_bootmem case

- the locking done just around phys_pmd_{init,update}() would leave out pgd
  updates, and it was needlessly covering code portions that do allocations
  (perhaps using a more friendly gfp value in alloc_low_page() would then be
  possible)
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8ae3a5a8
    • Y
      x86: work around MTRR mask setting · 38cc1c3d
      由 Yinghai Lu 提交于 
      Joshua Hoblitt reported that only 3 GB of his 16 GB of RAM is
usable. Booting with mtrr_show showed us the BIOS-initialized
MTRR settings - which are all wrong.

So the root cause is that the BIOS has not set the mask correctly:

>               [    0.429971]  MSR00000200: 00000000d0000000
>               [    0.433305]  MSR00000201: 0000000ff0000800
> should be ==> [    0.433305]  MSR00000201: 0000003ff0000800
>
>               [    0.436638]  MSR00000202: 00000000e0000000
>               [    0.439971]  MSR00000203: 0000000fe0000800
> should be ==> [    0.439971]  MSR00000203: 0000003fe0000800
>
>               [    0.443304]  MSR00000204: 0000000000000006
>               [    0.446637]  MSR00000205: 0000000c00000800
> should be ==> [    0.446637]  MSR00000205: 0000003c00000800
>
>               [    0.449970]  MSR00000206: 0000000400000006
>               [    0.453303]  MSR00000207: 0000000fe0000800
> should be ==> [    0.453303]  MSR00000207: 0000003fe0000800
>
>               [    0.456636]  MSR00000208: 0000000420000006
>               [    0.459970]  MSR00000209: 0000000ff0000800
> should be ==> [    0.459970]  MSR00000209: 0000003ff0000800

So detect this borkage and add the prefix 111.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      38cc1c3d
  7. 21 8月, 2008 11 次提交
  9. 20 8月, 2008 7 次提交
  11. 19 8月, 2008 6 次提交
  13. 18 8月, 2008 5 次提交
    • A
      x86: fix build warnings in real mode code · 1b72691c
      由 Andi Kleen 提交于 
      This recent patch

commit c3965bd1
Author: Paul Jackson <pj@sgi.com>
Date:   Wed May 14 08:15:34 2008 -0700

    x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant

caused these new warnings during a normal build:

In file included from linux-2.6/arch/x86/boot/memory.c:17:
linux-2.6/include/linux/log2.h: In function '__ilog2_u32':
linux-2.6/include/linux/log2.h:34: warning: implicit declaration of function 'fls'
linux-2.6/include/linux/log2.h: In function '__ilog2_u64':
linux-2.6/include/linux/log2.h:42: warning: implicit declaration of function 'fls64'
linux-2.6/include/linux/log2.h: In function '__roundup_pow_of_two ':
linux-2.6/include/linux/log2.h:63: warning: implicit declaration of function 'fls_long'

I tried to fix them in log2.h, but it's difficult because the real mode
environment is completely different from a normal kernel environment. Instead
define an own ARRAY_SIZE macro in boot.h, similar to the other private
macros there.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1b72691c
    • M
      x86, calgary: fix section mismatch warning - get_tce_space_from_tar · f7106662
      由 Marcin Slusarz 提交于 
      WARNING: vmlinux.o(.text+0x27032): Section mismatch in reference from the function get_tce_space_from_tar() to the function .init.text:calgary_bus_has_devices()
The function get_tce_space_from_tar() references
the function __init calgary_bus_has_devices().
This is often because get_tce_space_from_tar lacks a __init
annotation or the annotation of calgary_bus_has_devices is wrong.

get_tce_space_from_tar is called only from __init function (calgary_init)
and calls __init function (calgary_bus_has_devices).
So annotate it properly.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Chandru Siddalingappa <chandru@in.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f7106662
    • M
      x86: silence section mismatch warning - get_local_pda · d19fbfdf
      由 Marcin Slusarz 提交于 
      Take out part of get_local_pda referencing __init function (free_bootmem)
to new (static) function marked as __ref. It's safe to do because free_bootmem
is called before __init sections are dropped.

WARNING: vmlinux.o(.cpuinit.text+0x3cd7): Section mismatch in reference from the function get_local_pda() to the function .init.text:free_bootmem()
The function __cpuinit get_local_pda() references
a function __init free_bootmem().
If free_bootmem is only used by get_local_pda then
annotate free_bootmem with a matching annotation.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d19fbfdf
    • D
      x86: fix i486 suspend to disk CR4 oops · e532c06f
      由 David Fries 提交于 
      arch/x86/power/cpu_32.c __save_processor_state calls read_cr4()
only a i486 CPU doesn't have the CR4 register.  Trying to read it
produces an invalid opcode oops during suspend to disk.

Use the safe rc4 reading op instead. If the value to be written is
zero the write is skipped.

arch/x86/power/hibernate_asm_32.S
done: swapped the use of %eax and %ecx to use jecxz for
the zero test and jump over store to %cr4.
restore_image: s/%ecx/%eax/ to be consistent with done:

In addition to __save_processor_state, acpi_save_state_mem,
efi_call_phys_prelog, and efi_call_phys_epilog had checks added
(acpi restore was in assembly and already had a check for
non-zero).  There were other reads and writes of CR4, but MCE and
virtualization shouldn't be executed on a i486 anyway.
Signed-off-by: NDavid Fries <david@fries.net>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e532c06f
    • M
      x86: mpparse.c: fix section mismatch warning · 39e00fe2
      由 Marcin Slusarz 提交于 
      WARNING: vmlinux.o(.text+0x118f7): Section mismatch in reference from the function construct_ioapic_table() to the function .init.text:MP_bus_info()
The function construct_ioapic_table() references
the function __init MP_bus_info().
This is often because construct_ioapic_table lacks a __init
annotation or the annotation of MP_bus_info is wrong.

construct_ioapic_table is called only from construct_default_ISA_mptable which is __init
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      39e00fe2