If the glibc xattr.h header is included after the uapi header,
compilation fails due to an enum re-using a #define from the uapi
header.

Protect against this by guarding the define and enum inclusions against
each other.

(See https://lists.debian.org/debian-glibc/2014/03/msg00029.html
and https://sourceware.org/glibc/wiki/Synchronizing_Headers
for more information.)
Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Allan McRae <allan@archlinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This change adds infrastructure to allow for generic properties for
inodes. Properties are name/value pairs that can be associated with
inodes for different purposes. They are stored as xattrs with the
prefix "btrfs."

Properties can be inherited - this means when a directory inode has
inheritable properties set, these are added to new inodes created
under that directory. Further, subvolumes can also have properties
associated with them, and they can be inherited from their parent
subvolume. Naturally, directory properties have priority over subvolume
properties (in practice a subvolume property is just a regular
property associated with the root inode, objectid 256, of the
subvolume's fs tree).

This change also adds one specific property implementation, named
"compression", whose values can be "lzo" or "zlib" and it's an
inheritable property.

The corresponding changes to btrfs-progs were also implemented.
A patch with xfstests for this feature will follow once there's
agreement on this change/feature.

Further, the script at the bottom of this commit message was used to
do some benchmarks to measure any performance penalties of this feature.

Basically the tests correspond to:

Test 1 - create a filesystem and mount it with compress-force=lzo,
then sequentially create N files of 64Kb each, measure how long it took
to create the files, unmount the filesystem, mount the filesystem and
perform an 'ls -lha' against the test directory holding the N files, and
report the time the command took.

Test 2 - create a filesystem and don't use any compression option when
mounting it - instead set the compression property of the subvolume's
root to 'lzo'. Then create N files of 64Kb, and report the time it took.
The unmount the filesystem, mount it again and perform an 'ls -lha' like
in the former test. This means every single file ends up with a property
(xattr) associated to it.

Test 3 - same as test 2, but uses 4 properties - 3 are duplicates of the
compression property, have no real effect other than adding more work
when inheriting properties and taking more btree leaf space.

Test 4 - same as test 3 but with 10 properties per file.

Results (in seconds, and averages of 5 runs each), for different N
numbers of files follow.

* Without properties (test 1)

                    file creation time        ls -lha time
10 000 files              3.49                   0.76
100 000 files            47.19                   8.37
1 000 000 files         518.51                 107.06

* With 1 property (compression property set to lzo - test 2)

                    file creation time        ls -lha time
10 000 files              3.63                    0.93
100 000 files            48.56                    9.74
1 000 000 files         537.72                  125.11

* With 4 properties (test 3)

                    file creation time        ls -lha time
10 000 files              3.94                    1.20
100 000 files            52.14                   11.48
1 000 000 files         572.70                  142.13

* With 10 properties (test 4)

                    file creation time        ls -lha time
10 000 files              4.61                    1.35
100 000 files            58.86                   13.83
1 000 000 files         656.01                  177.61

The increased latencies with properties are essencialy because of:

*) When creating an inode, we now synchronously write 1 more item
   (an xattr item) for each property inherited from the parent dir
   (or subvolume). This could be done in an asynchronous way such
   as we do for dir intex items (delayed-inode.c), which could help
   reduce the file creation latency;

*) With properties, we now have larger fs trees. For this particular
   test each xattr item uses 75 bytes of leaf space in the fs tree.
   This could be less by using a new item for xattr items, instead of
   the current btrfs_dir_item, since we could cut the 'location' and
   'type' fields (saving 18 bytes) and maybe 'transid' too (saving a
   total of 26 bytes per xattr item) from the btrfs_dir_item type.

Also tried batching the xattr insertions (ignoring proper hash
collision handling, since it didn't exist) when creating files that
inherit properties from their parent inode/subvolume, but the end
results were (surprisingly) essentially the same.

Test script:

$ cat test.pl
  #!/usr/bin/perl -w

  use strict;
  use Time::HiRes qw(time);
  use constant NUM_FILES => 10_000;
  use constant FILE_SIZES => (64 * 1024);
  use constant DEV => '/dev/sdb4';
  use constant MNT_POINT => '/home/fdmanana/btrfs-tests/dev';
  use constant TEST_DIR => (MNT_POINT . '/testdir');

  system("mkfs.btrfs", "-l", "16384", "-f", DEV) == 0 or die "mkfs.btrfs failed!";

  # following line for testing without properties
  #system("mount", "-o", "compress-force=lzo", DEV, MNT_POINT) == 0 or die "mount failed!";

  # following 2 lines for testing with properties
  system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
  system("btrfs", "prop", "set", MNT_POINT, "compression", "lzo") == 0 or die "set prop failed!";

  system("mkdir", TEST_DIR) == 0 or die "mkdir failed!";
  my ($t1, $t2);

  $t1 = time();
  for (my $i = 1; $i <= NUM_FILES; $i++) {
      my $p = TEST_DIR . '/file_' . $i;
      open(my $f, '>', $p) or die "Error opening file!";
      $f->autoflush(1);
      for (my $j = 0; $j < FILE_SIZES; $j += 4096) {
          print $f ('A' x 4096) or die "Error writing to file!";
      }
      close($f);
  }
  $t2 = time();
  print "Time to create " . NUM_FILES . ": " . ($t2 - $t1) . " seconds.\n";
  system("umount", DEV) == 0 or die "umount failed!";
  system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";

  $t1 = time();
  system("bash -c 'ls -lha " . TEST_DIR . " > /dev/null'") == 0 or die "ls failed!";
  $t2 = time();
  print "Time to ls -lha all files: " . ($t2 - $t1) . " seconds.\n";
  system("umount", DEV) == 0 or die "umount failed!";
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

hfsplus: reworked support of extended attributes.

Current mainline implementation of hfsplus file system driver treats as
extended attributes only two fields (fdType and fdCreator) of user_info
field in file description record (struct hfsplus_cat_file).  It is
possible to get or set only these two fields as extended attributes.
But HFS+ treats as com.apple.FinderInfo extended attribute an union of
user_info and finder_info fields as for file (struct hfsplus_cat_file)
as for folder (struct hfsplus_cat_folder).  Moreover, current mainline
implementation of hfsplus file system driver doesn't support special
metadata file - attributes tree.

Mac OS X 10.4 and later support extended attributes by making use of the
HFS+ filesystem Attributes file B*-tree feature which allows for named
forks.  Mac OS X supports only inline extended attributes, limiting
their size to 3802 bytes.  Any regular file may have a list of extended
attributes.  HFS+ supports an arbitrary number of named forks.  Each
attribute is denoted by a name and the associated data.  The name is a
null-terminated Unicode string.  It is possible to list, to get, to set,
and to remove extended attributes from files or directories.

It exists some peculiarity during getting of extended attributes list by
means of getfattr utility.  The getfattr utility expects prefix "user."
before any extended attribute's name.  So, it ignores any names that
don't contained such prefix.  Such behavior of getfattr utility results
in unexpected empty output of extended attributes list even in the case
when file (or folder) contains extended attributes.  It needs to use
empty string as regular expression pattern for names matching (getfattr
--match="").

For support of extended attributes in HFS+:
1. It was added necessary on-disk layout declarations related to Attributes
   tree into hfsplus_raw.h file.
2. It was added attributes.c file with implementation of functionality of
   manipulation by records in Attributes tree.
3. It was reworked hfsplus_listxattr, hfsplus_getxattr, hfsplus_setxattr
   functions in ioctl.c. Moreover, it was added hfsplus_removexattr method.

This patch:

Add osx.* prefix for handling namespace of Mac OS X extended attributes.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>