RSK+ platforms have quite a few characteristics in common, so roll them
together in to a shiny new RSK mach-type.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

drivers/oprofile/ objects have proven to be problematic in this regard,
so simply disable -Werror for now.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We chan't share code for udivsi3 and udivsi3_i4, because they
have a different clobber list. Copy udivsi3 from gcc-4.1.2.

As shown in arch/sh/lib/udivsi3.S (and -Os.S),

  .global __udivsi3_i4i
  .global __udivsi3_i4
  .global __udivsi3
__udivsi3_i4i:
  ...

Three symbols are sharing one code, which is actually udivsi3_i4i.
But, this results unwanted code with gcc 4.1.

In gcc, these three are treated as pseudo instructions that have
their own clobber list apart from the usual calling convention.

According to sh's machine description. The clobber list is as
follows:

 - udivsi3_i4i : t,r1,pr,mach,macl
 - udivsi3_i4  : t,r0,r1,r4,r5,pr,dr0,dr2,dr4
 - udivsi3     : t,r4,pr

The caller of udivsi3 will be left with a broken r1 and mac*.

gcc-4.1.x and older(at least to 3.4) generate udivsi3.
ST's gcc-4.1.1 seems to be OK because it has _i4i.
Signed-off-by: NTakashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix incorrect use of loose in c-checksum.c

It should be 'lose', not 'loose'.
Signed-off-by: NNick Andrew <nick@nick-andrew.net>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This fixes up the __mutex_fastpath_xxx() routines to match the semantics
noted in the comment. Previously these were looping rather than doing a
single-pass, which is counter-intuitive, as the slow path takes care of
the looping for us in the event of contention.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Allow users to select CONFIG_CPU_IDLE regardless of processor type or board.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Allow users to select CONFIG_PM regardless of processor type or board.
Suspend and hibernation are only allowed on supported platforms.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Move the not-so-generic pm code from arch/sh/kernel/pm.c to the
platform directory together with the rest of the hp6xx pm code.

This is done to let non-hp6xx platforms enable CONFIG_PM.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update the se7343 defconfig with:
 - use 33MHz PCLK
 - increase max number of SCIFs
 - add serial console configuration to compiled-in kernel command line
 - add 8250 serial port support
 - add sh-mobile-i2c driver
 - add uio driver to export VEU and VPU
 - add usb support and isp1161 host controller
 - add dm9601 ethernet-over-usb support
 - remove smc91x support
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Remove out-of-date se7343 ioport code including some old support
for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical
smc91x that once must have been on a special daughterboard.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add isp1161 platform data to get usb host working on se7343.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add 8250 platform data to setup the ST16C2550C chip on se7343.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix to make sure that the on-board interrupt sources are included
in the interrupt count on se7343.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix interrupt values for the first sh7343 SCIF port and
update the configuration to include the remaining 3 ones.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Make sure the 32 KHz r_clk rate gets propagated correctly. Without
this fix the clocks for RTC, CMT, KEYSC and RWDT are stuck at 0 Hz.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds support for the RTE RSK+ 7201 board.
Signed-off-by: NPeter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds support for the SH-2A FPU based SH7201 processor subtype.
Signed-off-by: NPeter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Use struct irq_chip for the interrupt handler for the HD64461. Also
convert some in{b,w} and out{b,w} calls to the equivalent __raw_* calls.
Include <linux/io.h> and not <asm/io.h> to stop checkpatch.pl
complaining.

This change should now allow machines with HD64461 to define
GENERIC_HARDIRQS_NO__DO_IRQ.
Acked-by: NKristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: NMatt Fleming <mjf@gentoo.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix the problem that cannot work a PCI device when system memory size is
256Mbyte in 29bit address mode.
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Needed for dynamic ftrace API changes.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Description snipped from Steven Rostedt's PPC patch:

    When idle is called, interrupts are blocked, but the idle
    function will still wake up on an interrupt. The problem is
    that the interrupt disabled latency tracer will take this call
    to idle as a latency.

    This patch disables the latency tracing when going into idle.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This implements a simple show_code() that is in turn plugged in to
show_regs() to provide minimal code dumping at the end of the trace.

Built on top of a simple instruction disassembler derived from the
binutils opcode table.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This plugs in some extra encodings for matching more bsr/bsrf/jsr
branches.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This was removed in the libgcc integration, but there are still some
compilers that need this. We also relax the rules on the ISA tuning in
the cases where there are no matches for the CPU tuning and adopt the
-any default, which matches the intent of the isa-y target list. This
compensates for mismatches where binutils supports a wide array of
targets whilst the compiler is much more restricted.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds support for unaligned loads on SH-4A, using the SH-4A's
neutered movua.l instruction. As movua.l is r0-inspired, stores are
still handled through the packed struct.

Based on asm-generic/unaligned.h by Harvey Harrison.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds a pass-through case when ioremapping P4 addresses.

Addresses passed to ioremap() should be physical addresses, so the
best option is usually to convert the virtual address to a physical
address before calling ioremap. This will give you a virtual address
in P2 which matches the physical address and this works well for
most internal hardware blocks on the SuperH architecture.

However, some hardware blocks must be accessed through P4. Converting
the P4 address to a physical and then back to a P2 does not work. One
example of this is the sh7722 TMU block, it must be accessed through P4.

Without this patch P4 addresses will be mapped using PTEs which
requires the page allocator to be up and running.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add fast mutex path implementation for the SH4A architecture
Signed-off-by: NMichael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH7720 and 7721 has IP of Frame Buffer same as SH7760.
This driver can support these.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The setting of the color palette was wrong, fixed it.
And removed fb_setcmap, and added fb_setcolreg function.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The SH7709 datasheet defines bit 5 as set for burst mode, clear for
cycle-steal mode.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

sh7709 hardware manual says DMAOR is 16 bits long on this platform.

Tested and working with a modified smsc911x ethernet driver (sh-dma
support patch for this driver is coming soon).
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

I'm using these constants in support of an in-house development board,
and thought they may be useful to other users of SH7709.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This ties in the new SH-2A 32-bit non-atomic bitops.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Needed by older compilers.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>