- 07 1月, 2011 6 次提交
-
-
由 Andy Adamson 提交于
Resetting the client minor version operations causes nfs4_destroy_callback to fail to shutdown the NFSv4.1 callback service. There is no reason to reset the client minorversion operations when the nfs_client struct is being freed. Remove the minorverion reset and rename the function. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The new back channel transport means we call the normal creation routine as well as svc_xprt_put. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Move the current sock create and destroy routines into the new transport ops. Back channel socket will be destroyed by the svc_closs_all call in svc_destroy. Added check: only TCP supported on shared back channel. Signed-off-by: NAndy Adamson <andros@netapp.com> Acked-by: NBruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The NFSv4.1 shared back channel does not need to call svc_drop because the callback service never outlives the single connection it services, and it reuses it's buffers and keeps the trasport. Signed-off-by: NAndy Adamson <andros@netapp.com> Acked-by: NBruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 1月, 2011 7 次提交
-
-
由 Aneesh Kumar K.V 提交于
This patch make nfsv4 use the generic xattr handling code to get the nfsv4 acl. This will help us to add richacl support to nfsv4 in later patches Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Aneesh Kumar K.V 提交于
We want to skip VFS applying mode for NFS. So set MS_POSIXACL always and selectively use umask. Ideally we would want to use umask only when we don't have inheritable ACEs set. But NFS currently don't allow to send umask to the server. So this is best what we can do and this is consistent with NFSv3 Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Namhyung Kim 提交于
Use ERR_CAST() intead of wierd-looking cast. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Trivial, but confusing when you're trying to grep through this code.... Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
On Tue, 2010-12-14 at 16:58 +0800, Mi Jinlong wrote: > Hi, > > When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic > at NFS client's __rpc_create_common function. > > The panic place is: > rpc_mkpipe > __rpc_lookup_create() <=== find pipefile *idmap* > __rpc_mkpipe() <=== pipefile is *idmap* > __rpc_create_common() > ****** BUG_ON(!d_unhashed(dentry)); ****** *panic* > > It means that the dentry's d_flags have be set DCACHE_UNHASHED, > but it should not be set here. > > Is someone known this bug? or give me some idea? > > A reproduce program is append, but it can't reproduce the bug every time. > the export is: "/nfsroot *(rw,no_root_squash,fsid=0,insecure)" > > And the panic message is append. > > ============================================================================ > #!/bin/sh > > LOOPTOTAL=768 > LOOPCOUNT=0 > ret=0 > > while [ $LOOPCOUNT -ne $LOOPTOTAL ] > do > ((LOOPCOUNT += 1)) > service nfs restart > /usr/sbin/rpc.idmapd > mount -t nfs4 127.0.0.1:/ /mnt|| return 1; > ls -l /var/lib/nfs/rpc_pipefs/nfs/*/ > umount /mnt > echo $LOOPCOUNT > done > > =============================================================================== > Code: af 60 01 00 00 89 fa 89 f0 e8 64 cf 89 f0 e8 5c 7c 64 cf 31 c0 8b 5c 24 10 8b > 74 24 14 8b 7c 24 18 8b 6c 24 1c 83 c4 20 c3 <0f> 0b eb fc 8b 46 28 c7 44 24 08 20 > de ee f0 c7 44 24 04 56 ea > EIP:[<f0ee92ea>] __rpc_create_common+0x8a/0xc0 [sunrpc] SS:ESP 0068:eccb5d28 > ---[ end trace 8f5606cd08928ed2]--- > Kernel panic - not syncing: Fatal exception > Pid:7131, comm: mount.nfs4 Tainted: G D -------------------2.6.32 #1 > Call Trace: > [<c080ad18>] ? panic+0x42/0xed > [<c080e42c>] ? oops_end+0xbc/0xd0 > [<c040b090>] ? do_invalid_op+0x0/0x90 > [<c040b10f>] ? do_invalid_op+0x7f/0x90 > [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc] > [<f0edc433>] ? rpc_free_task+0x33/0x70[sunrpc] > [<f0ed6508>] ? prc_call_sync+0x48/0x60[sunrpc] > [<f0ed656e>] ? rpc_ping+0x4e/0x60[sunrpc] > [<f0ed6eaf>] ? rpc_create+0x38f/0x4f0[sunrpc] > [<c080d80b>] ? error_code+0x73/0x78 > [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc] > [<c0532bda>] ? d_lookup+0x2a/0x40 > [<f0ee94b1>] ? rpc_mkpipe+0x111/0x1b0[sunrpc] > [<f10a59f4>] ? nfs_create_rpc_client+0xb4/0xf0[nfs] > [<f10d6c6d>] ? nfs_fscache_get_client_cookie+0x1d/0x50[nfs] > [<f10d3fcb>] ? nfs_idmap_new+0x7b/0x140[nfs] > [<c05e76aa>] ? strlcpy+0x3a/0x60 > [<f10a60ca>] ? nfs4_set_client+0xea/0x2b0[nfs] > [<f10a6d0c>] ? nfs4_create_server+0xac/0x1b0[nfs] > [<c04f1400>] ? krealloc+0x40/0x50 > [<f10b0e8b>] ? nfs4_remote_get_sb+0x6b/0x250[nfs] > [<c04f14ec>] ? kstrdup+0x3c/0x60 > [<c0520739>] ? vfs_kern_mount+0x69/0x170 > [<f10b1a3c>] ? nfs_do_root_mount+0x6c/0xa0[nfs] > [<f10b1b47>] ? nfs4_try_mount+0x37/0xa0[nfs] > [<f10afe6d>] ? nfs4_validate_text_mount_data+-x7d/0xf0[nfs] > [<f10b1c42>] ? nfs4_get_sb+0x92/0x2f0 > [<c0520739>] ? vfs_kern_mount+0x69/0x170 > [<c05366d2>] ? get_fs_type+0x32/0xb0 > [<c052089f>] ? do_kern_mount+0x3f/0xe0 > [<c053954f>] ? do_mount+0x2ef/0x740 > [<c0537740>] ? copy_mount_options+0xb0/0x120 > [<c0539a0e>] ? sys_mount+0x6e/0xa0 Hi, Does the following patch fix the problem? Cheers Trond -------------------------- SUNRPC: Fix a BUG in __rpc_create_common From: Trond Myklebust <Trond.Myklebust@netapp.com> Mi Jinlong reports: When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic at NFS client's __rpc_create_common function. The panic place is: rpc_mkpipe __rpc_lookup_create() <=== find pipefile *idmap* __rpc_mkpipe() <=== pipefile is *idmap* __rpc_create_common() ****** BUG_ON(!d_unhashed(dentry)); ****** *panic* The test is wrong: we can find ourselves with a hashed negative dentry here if the idmapper tried to look up the file before we got round to creating it. Just replace the BUG_ON() with a d_drop(dentry). Reported-by: NMi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Dan Carpenter 提交于
We unlock again after we goto out. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jesper Juhl 提交于
Hi, In fs/nfs/proc.c::nfs_proc_symlink() we will leak memory if either nfs_alloc_fhandle() or nfs_alloc_fattr() returns NULL but the other one doesn't. This patch ensures memory allocated by one when the other fails is always released (this is safe since nfs_free_fattr() and nfs_free_fhandle() both call kfree which deals gracefully with NULL pointers). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 22 12月, 2010 6 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Update: added check for zero value as it was before (note: can't simply check mountd_port for positive value because it's typeof unsigned short) Default value for mount server port is set to NFS_UNSPEC_PORT (-1) and will not be changed during parsing mount options for mound data version 6. This default value will be showed for mountport in /proc/mounts always since current default check is for zero value. This small mistake leads to big problem, because during umount.nfs execution from old user-space utils (at least nfs-utils 1.0.9) this value will be used as the server port to connect to. This request will be rejected (since port is 65535) and thus nfs mount point can't be unmounted. Note from Chuck Lever (chuck.lever@oracle.com): this is only possible if /etc/mtab is a link to /proc/mounts. Not all systems have this configuration. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Note that cl_lease_time is in jiffies. This can cause a very long wait in the NFS4ERR_CLID_INUSE case. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jesper Juhl 提交于
Take advantage of kmem_cache_zalloc() in nfs_page_alloc(). Save a call to memset() and a few bytes. Before: [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o text data bss dec hex filename 1765 0 8 1773 6ed fs/nfs/pagelist.o After: [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o text data bss dec hex filename 1749 0 8 1757 6dd fs/nfs/pagelist.o Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Tobias Klauser 提交于
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 12月, 2010 21 次提交
-
-
由 Chuck Lever 提交于
Clean up. The contents of the src_sap field is not used in nlm_alloc_host(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. Remove the now unused helper nlm_lookup_host(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. nlm_hosts now contains only server-side entries. Rename it to match convention of client side cache. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. Change nlmsvc_lookup_host() to be purpose-built for server-side nlm_host management. This replaces the generic nlm_lookup_host() helper function, just like on the client side. The lookup logic is specialized for server host lookups. The server side cache also gets its own specialized equivalent of the nlm_release_host() function. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
NFS clients don't need the garbage collection processing that is performed on nlm_host structures. The client picks up an nlm_host at mount time and holds a reference to it until the file system is unmounted. Servers, on the other hand, don't have a precise way to tell when an nlm_host is no longer being used, so zero refcount nlm_host entries are left to expire in the cache after a time. Basically there's nothing holding a reference to an nlm_host between individual server-side NLM requests, but we can't afford the expense of recreating them for every new NLM request from a client. The nlm_host cache adds some lifetime hysteresis to entries in the cache so the next time a particular nlm_host is needed, it's likely to be discovered by a lookup rather than created from whole cloth. With the new implementation, client nlm_host cache items are no longer garbage collected, and are destroyed directly by a new release function specialized for client entries, nlmclnt_release_host(). They are cached in their own data structure, and have their own lookup logic, simplified and specialized for client nlm_host entries. However, the client nlm_host cache still shares reboot recovery logic with the server nlm_host cache. The NSM "peer rebooted" downcall for clients and servers still come through the same RPC call. This is a legacy formal API that would be difficult to alter, and besides, the user space NSM implementation can't tell the difference between peers that are clients or servers. For this reason, the client cache continues to share the nlm_host_mutex (and reboot recovery logic) with the server cache. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The nlm_release_call() function is invoked from both the server and the client side. We're about to introduce a distinct server- and client-side nlm_release_host(), so nlm_release_call() must first be split into a client-side and a server-side version. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Refactor the tail of nlm_gc_hosts() into nlm_destroy_host() so that this logic can be used separately from garbage collection. Rename it _locked() to document that it must be called with the hosts cache mutex held. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Refactor nlm_host allocation and initialization into a separate function. This will be the common piece of server and client nlm_host lookup logic after the nlm_host cache is split. Small change: use kmalloc() instead of kzalloc(), as we're overwriting almost all fields in the new nlm_host struct with non-zero values immediately after it is allocated. An added benefit is we now have an explicit reference to each field name where it is initialized (for all you cscope fans out there). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Minor reorganization; no change in behavior. This will save some duplicated code after we split the client and server host caches. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> [ cel: Forward-ported to 2.6.37 ] Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
We've got a lot of loops like this, and I find them a little easier to read with the macros. More such loops are coming. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> [ cel: Forward-ported to 2.6.37 ] Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Now that all client-side XDR decoder routines use xdr_streams, there should be no need to support the legacy calling sequence [rpc_rqst *, __be32 *, RPC res *] anywhere. We can construct an xdr_stream in the generic RPC code, instead of in each decoder function. This is a refactoring change. It should not cause different behavior. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Now that all client-side XDR encoder routines use xdr_streams, there should be no need to support the legacy calling sequence [rpc_rqst *, __be32 *, RPC arg *] anywhere. We can construct an xdr_stream in the generic RPC code, instead of in each encoder function. Also, all the client-side encoder functions return 0 now, making a return value superfluous. Take this opportunity to convert them to return void instead. This is a refactoring change. It should not cause different behavior. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. Just fixed a panic where the nrprocs field in a different upper layer client was set by hand incorrectly. Use the compiler-generated method used by the other upper layer protocols. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. The trend in the other XDR encoder functions is to BUG() when encoding problems occur, since a problem here is always due to a local coding error. Then, instead of a status, zero is unconditionally returned. Update the rpcbind XDR encoders to behave this way. To finish the update, use the new-style be32_to_cpup() and cpu_to_be32() macros, and compute the buffer sizes using raw integers instead of sizeof(). This matches the conventions used in other XDR functions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. The UMNT request has a NULL response. There's no need to set up a mountres structure for it. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. The trend in the other XDR encoder functions is to BUG() when encoding problems occur, since a problem here is always due to a local coding error. Then, instead of a status, zero is unconditionally returned. Update the mount client XDR encoders to behave this way. To finish the update, use the new-style be32_to_cpup() and cpu_to_be32() macros, and compute the buffer sizes using raw integers instead of sizeof(). This matches the conventions used in other XDR functions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. The trend in the other XDR encoder functions is to BUG() when encoding problems occur, since a problem here is always due to a local coding error. Then, instead of a status, zero is unconditionally returned. Update the NSM XDR encoders to behave this way. To finish the update, use the new-style be32_to_cpup() and cpu_to_be32() macros, and compute the buffer sizes using raw integers instead of sizeof(). This matches the conventions used in other XDR functions Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. .../linux/nfs-2.6/fs/nfs/nfs4xdr.c: In function ‘decode_getdeviceinfo’: .../linux/nfs-2.6/fs/nfs/nfs4xdr.c:5008: warning: comparison between signed and unsigned integer expressions Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. The pointer returned by ->decode_dirent() is no longer used as a pointer. The only call site (xdr_decode() in fs/nfs/dir.c) simply extracts the errno value encoded in the pointer. Replace the returned pointer with a standard integer errno return value. Also, pass the "server" argument as part of the nfs_entry instead of as a separate parameter. It's faster to derive "server" in nfs_readdir_xdr_to_array() since we already have the directory's inode handy. "server" ought to be invariant for a set of entries in the same directory, right? The legacy versions of decode_dirent() don't use "server" anyway, so it's wasted work for them to derive and pass "server" for each entry. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
When computing the length of the header, be sure to include the four octets consumed by "count". Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-