This patch adds support for legacy_io and legacy_mem files in
bus class directories in sysfs for powerpc
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This adds the ability to mmap legacy IO space to the legacy_io files
in sysfs on platforms that support it. This will allow to clean up
X to use this instead of /dev/mem for legacy IO accesses such as
those performed by Int10.

While at it I moved pci_create/remove_legacy_files() to pci-sysfs.c
where I think they belong, thus making more things statis in there
and cleaned up some spurrious prototypes in the ia64 pci.h file
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch uniformizes PCI probing debug boot messages with dev_printk()
intead of manual printk()

It changes adress range output from [%llx, %llx] to [%#llx-%#llx], like
in pci_request_region().

For example, it goes from the mixed-style:

PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4280000, f4283fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

to uniform:

pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4280000-0xf4283fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

This patch has been runtime tested, boot log messages diffed, everything
looks OK.
Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NVincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch adds support for PCI Express Alternative Routing-ID
Interpretation (ARI) capability.

The ARI capability extends the Function Number field of the PCI Express
Endpoint by reusing the Device Number which is otherwise hardwired to 0.
With ARI, an Endpoint can have up to 256 functions.
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch centralizes the initialization and release functions of
various PCI capabilities in probe.c, which makes the introduction
of new capability support functions cleaner in the future.
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch centralizes functions used to add and remove sysfs entries
for various capabilities. With this cleanup, the code is more readable
and easier for adding new capability related functions.
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Since patch 6ac665c6 my infiniband
controller hasn't worked.  This is because it has 64-bit prefetchable
memory, which was mistakenly being  taken to be 32-bit memory.  The
resource flags in this case are PCI_BASE_ADDRESS_MEM_TYPE_64 |
PCI_BASE_ADDRESS_MEM_PREFETCH.

This patch checks only for the PCI_BASE_ADDRESS_MEM_TYPE_64 bit; thus
whether the region is prefetchable or not is ignored.  This fixes my
Infiniband.
Reviewed-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This is a cleanup that changes all PCI configuration space size
representations to the macros (PCI_CFG_SPACE_SIZE and
PCI_CFG_SPACE_EXP_SIZE). And the macros are also moved from
drivers/pci/probe.c to drivers/pci/pci.h.
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This is a cleanup that replaces the resource calculation formula with
resource_size().
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This cleanup makes the argument names in PCI_VDEVICE comment consistent
with those used in its definition.
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Change debug variable name to one more unique to this driver.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use %pF instead of print_fn_descriptor_symbol() in quirks.c to get the name of
the hook we're calling.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Currently, get_##name in pci_hotplug_core.c will return 0 if module
unload wins the race between unload & reading the hotplug file.  Fix
that case to return -ENODEV like it should.
Reviewed-by: NAlex Chiang <achiang@hp.com>
Reviewed-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Get rid of the second definition of dev which hides the earlier one in
the argument list and causes a warning from sparse.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The current MSI-HOWTO.txt says that device drivers should not request the
memory space that contains MSI-X tables.  This is because the original
MSI-X implementation did a request_mem_region() on this space, but that
code was removed long ago (in the pre-git era, in fact).  Years after the
code was changed, we might as well clean up the documention to avoid a
confusing mention of requesting regions: drivers using MSI-X can just use
pci_request_regions() just like any other driver, and so there's no need
for MSI-HOWTO.txt to talk about this at all.
Signed-off-by: NRoland Dreier <roland@digitalvampire.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Checkpatch would have complained about this but neither Bjorn nor myself
ran it prior to pushing.  Fixup the issues Andrew pointed out.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The introduction of struct pci_slot (f46753c5)
added a struct pci_slot pointer to struct pci_dev, but we forgot to
associate the two.

Connect the two structs together; the interesting portions of the object
lifetimes are:

	- when a new pci_slot is created, connect it to the appropriate
	  pci_dev's. A single pci_slot may be associated with multiple
	  pci_dev's, e.g. any multi-function PCI device.

	- when a pci_slot is released, look for all the pci_dev's it was
	  associated with, and set their pci_slot pointers to NULL

	- when a pci_dev is created, look for slots to associate with.

Note -- when a pci_dev is released, we don't need to do any bookkeeping,
since pci_slot's do not have pointers to pci_dev's.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Stephen Hemminger wrote:
> Looks like Mike created cpulistaffinty in sysfs but never completed
> the job.

This patch hooks things up correctly, taking care to remove the new file
when the bus is destroyed.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

In msi_capability_init, we can make use of the calculated results
instead of calling is_mask_bit_support and is_64bit_address twice.
Signed-off-by: NJike Song <albcamus@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch replaces printks within pciehp module with dev_printks.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

I think an appropriate name tag of "hpdriver_portdrv" variable
is "pciehp" rather than "hpdriver".
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch updates the Intel Ibex Peak (PCH) LPC and SMBus Controller
DeviceIDs.

The LPC Controller ID is set by Firmware within the range of
0x3b00-3b1f.  This range is included in pci_ids.h using min and max
values, and irq.c now has code to handle the range (in lieu of 32
additions to a SWITCH statement).

The SMBus Controller ID is a fixed-value and will not change.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Current pciehp driver gets irq number from pci_dev->irq. But because
pciehp driver is a pci express port service driver, it should get irq
number from pcie_device->irq.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Since the code is shared pretty much most of the pci= options are shared,
but kernel-parameters.txt marked most of them as i386 only.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch changes these two messages:

    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2

to this:

    pci 0000:00:03.0: supports D1 D2

It also trivially converts a "dev_printk(KERN_INFO, ...)" to
"dev_info(...)".
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Please run checkpatch prior to sending patches, this one fixes several style
issues with the list_for_each conversion patch.

Cc: Cordelia Sam <cordesam@gmail.com>
Cc: Cordelia Sam <cordsam@linux.vnet.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Make code more readable with list_for_each_entry().
Signed-off-by: NCordelia Sam <cordesam@gmail.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format
used by lspci(8).
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format
used by lspci(8).
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the
cache for irq number should be 32 bit too.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Many device drivers use the following sequence of statements to enable
the device to wake up the system while being in the D3_hot or D3_cold
low power state:

        pci_enable_wake(pdev, PCI_D3hot, 1);
        pci_enable_wake(pdev, PCI_D3cold, 1);

However, the second call is not necessary if the first one succeeds (the
ordering of the statements above doesn't matter here) and it may even be
harmful, because we are not supposed to enable PME# after the wake-up
power has been enabled for the device.

To allow drivers to overcome this problem, introduce function
pci_wake_from_d3() that will enable the device to wake up the system
from any of D3_hot and D3_cold as long as the wake-up from at least one
of them is supported.
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch adds the CONFIG_PCI_QUIRKS option which allows to remove all
the PCI quirks, which are not necessarily used on embedded systems when
PCI is working properly. As this is a size-reduction option, it depends
on CONFIG_EMBEDDED. It allows to save almost 12 kilobytes of kernel
code:

   text	   data	    bss	    dec	    hex	filename
1287806	 123596	 212992	1624394	 18c94a	vmlinux.old
1275854	 123596	 212992	1612442	 189a9a	vmlinux
 -11952       0       0  -11952   -2EB0 +/-

This patch has originally been written by Zwane Mwaikambo
<zwane@arm.linux.org.uk> and is part of the Linux Tiny project.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Only accept dynids whose driver_data value matches one of the driver's
pci_driver_id entries. This prevents the user from accidentally passing
values the drivers do not expect.

Cc: Milton Miller <miltonm@bga.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The driver flag dynids.use_driver_data is almost consistently not set,
and causes more problems than it solves.  It was initially intended as a
flag to indicate whether a driver's usage of driver_data had been
carefully inspected and was ready for values from userspace.  That audit
was never done, so most drivers just get a 0 for driver_data when new
IDs are added from userspace via sysfs.  So remove the flag, allowing
drivers to see the data directly (a followon patch validates the passed
driver_data value against what the drivers expect).
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* git://git.infradead.org/battery-2.6:
  bq27x00_battery: use unaligned access helper
  power_supply: fix dependency of tosa_battery
  power_supply: Support for Texas Instruments BQ27200 battery managers
  power_supply: Add function to return system-wide power state
  pda_power: Check and handle return value of set_irq_wake

The EPCA can support indefinte break lengths and with info from digi that
can now be added
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (26 commits)
  9p: add more conservative locking
  9p: fix oops in protocol stat parsing error path.
  9p: fix device file handling
  9p: Improve debug support
  9p: eliminate depricated conv functions
  9p: rework client code to use new protocol support functions
  9p: remove unnecessary tag field from p9_req_t structure
  9p: remove 9p fcall debug prints
  9p: add new protocol support code
  9p: encapsulate version function
  9p: move dirread to fs layer
  9p: adjust 9p vfs write operation
  9p: move readn meta-function from client to fs layer
  9p: consolidate read/write functions
  9p: drop broken unused error path from p9_conn_create()
  9p: make rpc code common and rework flush code
  9p: use the rcall structure passed in the request in trans_fd read_work
  9p: apply common request code to trans_fd
  9p: apply common tagpool handling to trans_fd
  9p: move request management to client code
  ...

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: use correct fs type for v4 submounts and referrals
  Make nfs_file_cred more robust.
  NFS: Enable NFSv4 callback server to listen on AF_INET6 sockets

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: further unbork the ucb1400 ac97_bus dependencies
  mfd: ucb1400 needs GPIO
  mfd: ucb1400 sound driver uses/depends on AC97_BUS:
  mfd: Don't use NO_IRQ in WM8350
  mfd: update TMIO drivers to use the clock API
  mfd: twl4030-core irq simplification
  mfd: add base support for Dialog DA9030/DA9034 PMICs
  mfd: TWL4030 core driver
  mfd: support tmiofb cell on tc6393xb
  mfd: add OHCI cell to tc6393xb
  mfd: Fix htc-egpio compile warning
  mfd: do tcb6393xb state restore on resume only if requested
  mfd: provide and use setup hook for tc6393xb
  mfd: update sm501 debugging/low information messages
  mfd: reduce stack usage in mfd-core.c

* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits)
  UBIFS: fix ubifs_compress commentary
  UBIFS: amend printk
  UBIFS: do not read unnecessary bytes when unpacking bits
  UBIFS: check buffer length when scanning for LPT nodes
  UBIFS: correct condition to eliminate unecessary assignment
  UBIFS: add more debugging messages for LPT
  UBIFS: fix bulk-read handling uptodate pages
  UBIFS: improve garbage collection
  UBIFS: allow for sync_fs when read-only
  UBIFS: commit on sync_fs
  UBIFS: correct comment for commit_on_unmount
  UBIFS: update dbg_dump_inode
  UBIFS: fix commentary
  UBIFS: fix races in bit-fields
  UBIFS: ensure data read beyond i_size is zeroed out correctly
  UBIFS: correct key comparison
  UBIFS: use bit-fields when possible
  UBIFS: check data CRC when in error state
  UBIFS: improve znode splitting rules
  UBIFS: add no_chk_data_crc mount option
  ...