- 24 4月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 3月, 2012 1 次提交
-
-
由 Eliot Blennerhassett 提交于
Make this function consistent with others in this module by returning 1 for error, instead of -ENOMEM (reverts function signature change from a938fb1e) Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 3月, 2012 2 次提交
-
-
由 David Howells 提交于
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Dan Carpenter 提交于
This function returns zero or -ENOMEM, but because it's type is u16, the -ENOMEM gets changed to 65524. None of the callers care, but lets fix it anyway as a cleanup. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 1月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Dan Carpenter reported that setting 0 to uinfo->value.enumerated.items in snd_asihpi_cmode_info() may lead to Oops. This function should return an error immediately in such a case instead. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 12月, 2011 22 次提交
-
-
由 Eliot Blennerhassett 提交于
Sharing and not reinitialising static pcm_hardware struct resulted in stream format validity flags being incorrectly shared between cards. Fix and clarify by declaring locally and initialising in the open functions. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Since introduction of mono and low latency modes, fixed channel count of 2 is not always valid. Use reported max_channels instead. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Previously, only payload and size were correct, sufficient for reading, but other fields produced spurious debug output. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
It is useful to know the HPI version without having to load the module, in order to determine the matching firmware version. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Add new error codes, and adapter properties. Clean up some comments. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
dsp_code struct is not created if firmware is invalid, so check and zero of firmware pointer is not necessary Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Structs hpi_adapter and snd_card_asihpi had members that duplicate those in underlying hpi_adapter_obj or whose info can be retrieved using hpi_adapter_get_info(). Print less info in probe function, it can be retrieved from /proc. Avoid name redundancy: hpi_adapter_obj.adapter_type renamed to .type Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Enables retrieving more debug info in fewer transactions. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Structs related to network flash update are not required in kernel. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Add "Internal" node type. Remove GPI and GPO node types. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
The channel count can be queried to determine which. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Unlike other streams which support 1..max channels, Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
and update HPI version to 4.10 Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Elapsed counter should only count data committed to snd_pcm_period_elapsed, rather than all data available Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 12月, 2011 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 12月, 2011 1 次提交
-
-
由 Thomas Meyer 提交于
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 07 8月, 2011 1 次提交
-
-
由 Thomas Meyer 提交于
Use kzalloc rather than kmalloc followed by memset with 0 This considers some simple cases that are common and easy to validate Note in particular that there are no ...s in the rule, so all of the matched code has to be contiguous The semantic patch that makes this output is available in scripts/coccinelle/api/alloc/kzalloc-simple.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 8月, 2011 1 次提交
-
-
由 Eliot Blennerhassett 提交于
Avoids assigning possibly invalid address to pa, even if it is never dereferenced. Correct error response to reflect request object/function ids. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 8月, 2011 1 次提交
-
-
由 Jesper Juhl 提交于
We leak the memory allocated to 'firmware' when we fail to release_firmware() after a kmalloc() failure in hpi_dsp_code_open(). This patch should take care of the leak. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 7月, 2011 2 次提交
-
-
由 Dan Carpenter 提交于
"adapter" is used as an array index in the adapters[] array so the off by one would make us read past the end. 1c073b67 "ALSA: asihpi - Remove spurious adapter index check" reverted Dan Rosenberg's check that would have prevented the overflow here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Fixes bug introduced by 1c073b67. Also declare pa local to block in which it is used. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 7月, 2011 1 次提交
-
-
由 Eliot Blennerhassett 提交于
Formatting a PCM name is useful for module debug too. Add snd_prefix when making function public. [minor coding-style fixes by tiwai] Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 7月, 2011 4 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
HPI Version is used to check for firmware compatibility. This version will accept 4.08.xx released firmware, and will also accept 4.09.xx beta firmware Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Mute functionality was recently added to the DSP firmware Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Add names corresponding to new HPI node types. Shorten some names so that constructed names don't overflow the maximum name length. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-