The analog-loopback causes the speaker noises even if it's set to zero
volume.  As a simple workaround, just get rid of the loopback mixer.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=873704Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Disable the AA-loopback path to get rid of the constant white noise
that can be heard when headphones are used.
Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

I missed a rename during the review process.  Fix the
MODULE_DEVICE_TABLE to match the structure.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds a driver for the HDA block in Tegra SoCs.  The HDA bus is
used to communicate with the HDMI codec on Tegra124.

Most of the code is re-used from the Intel/PCI HDA driver.  It brings
over only two of the module params, power_save and probe_mask.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the Tegra12x HDA codec id to patch_hdmi.
Signed-off-by: NSumit Bhattacharya <sumitb@nvidia.com>
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just move field descriptions to the struct description in the kernel-doc
format. There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The "break;" should be indented.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The headphone and mic jacks on Thinkpad T440 are assigned to pins NID
0x16 and 0x19, respectively.  These need to be set up manually by a
fixup.
Reported-and-tested-by: NJoschi Brauchle <joschi.brauchle@tum.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently infoframe contents and channel mapping are only set when a
sink (monitor) is present.

However, this does not make much sense, since
1) We can make a very reasonable guess on CA after 18e39186 ("ALSA:
   hda - hdmi: Fallback to ALSA allocation when selecting CA") or by
   relying on a previously valid ELD (or we may be using a
   user-specified channel map).
2) Not setting infoframe contents and channel count simply means they
   are left at a possibly incorrect state - playback is still allowed
   to proceed (with missing or wrongly mapped channels).

Reasons for monitor_present being 0 include disconnected cable, video
driver issues, or codec not being spec-compliant. Note that in
actual disconnected-cable case it should not matter if these settings
are wrong as they will be re-set after jack detection, though.

Change the behavior to allow the infoframe contents and the channel
mapping to be set even without a sink/monitor, either based on the
previous valid ELD contents, if any, or based on sensible defaults
(standard channel layouts or provided custom map, sink type HDMI).
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Tested-by: NStephan Raue <stephan@openelec.tv>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel
count") channel count is no longer being set if monitor_present is 0.
This is because setting the count was moved after the CA value is
determined, which is only after the monitor_present check in
hdmi_setup_audio_infoframe().

Unfortunately, in some cases, such as with a non-spec-compliant codec or
with a problematic video driver, monitor_present is always 0. As a
specific example, this seems to happen with gen1 ATV (SiI1390 codec),
causing left-channel-only stereo playback (multi-channel playback has
apparently never worked with this codec despite it reporting 8 channels,
reason unknown).

Simply setting converter channel count without setting the pin infoframe
and channel mapping as well does not theoretically make much sense as
this will just mean they are out-of-sync and multichannel playback will
have a wrong channel mapping.

However, adding back just setting the converter channel count even in
no-monitor case is the safest change which at least fixes the stereo
playback regression on SiI1390 codec. Do that.
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Reported-by: NStephan Raue <stephan@openelec.tv>
Tested-by: NStephan Raue <stephan@openelec.tv>
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x1028067e), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent commit (ca460f86) changed the CORB RP reset procedure to
follow the specification with a couple of sanity checks.
Unfortunately, Nvidia controller chips seem not following this way,
and spew the warning messages like:
  snd_hda_intel 0000:00:10.1: CORB reset timeout#1, CORBRP = 0

This patch adds the workaround for such chips.  It just skips the new
reset procedure for the known broken chips.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The introduced functios check AC97 if it's ready for communication and
read data is valid.
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It will help to maintain HW accessors and, for example, switch from the
direct I/O to MMIO which is more convenient for PCI devices.
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

New codec ALC293/ALC3235 support multifunction jacks.
It used for menual select the input device.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add ALC3235 ALC3263.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x10280674), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For some reason, some of the comments were actually in poorly encoded french.
Translate them in english like they should have been in the first place.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The code contained in these sections are only dev_dbg calls, that are already
removed whenever DEBUG isn't defined.

Remove the redundant constructs.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some code was never compiled because hidden between an #if 0 .. #endif
structure, and even when removing these, it was never actually used elsewhere.
Remove it entirely.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit be4e6d3c ("ALSA: lx6464es: Use standard printk helpers") converted
the custom printk helpers that were used before to standard dev_* functions.
One of the dev_dbg calls had a typo, that was hidden away by an #if 0 .. #endif
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move to using the BIT macro for a few defines. It also allows to discard the
french comment that was saying exactly what the BIT macro is now pointing out.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit f9367f3f ("ALSA: lx6464es: Remove unused
function in pci/lx6464es/lx_core.c") removed the
lx_dsp_es_check_pipeline function that was the only user
of these defines.

Since they're useless now, simply remove them.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255,
SID: 0x1028067f), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The full_reset argument to azx_init_chip() carries boolean rather than
numerical information, so update the type to reflect that.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0283,
SID: 0x10280667), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

From azx_interrupt, use the helper to check if the device is active
instead of checking the state.  This will do the right thing if
runtime pm is disabled in addition to if the device is suspended.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

PCM pointer callbacks in ice1712 driver check the buffer size boundary
wrongly between bytes and frames.  This leads to PCM core warnings
like:
   snd_pcm_update_hw_ptr0: 105 callbacks suppressed
   ALSA pcm_lib.c:352 BUG: pcmC3D0c:0, pos = 5461, buffer size = 5461, period size = 2730

This patch fixes these checks to be placed after the proper unit
conversions.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently stream numbers are assigned in reverse order.

Unfortunately commit 7546abfb ("ALSA: hda - Increment
default stream numbers for AMD HDMI controllers") assumed this was not
the case (specifically, it had the "old cards had single device only"
=> "extra unused stream numbers do not matter" assumption), causing
non-working audio regressions for AMD Radeon HDMI users.

Change the stream numbers to be assigned in forward order.

The benefit is that regular audio playback will still work even if the
assumed stream count is too high, downside is that a too high stream
count may remain hidden.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002Reported-by: NChristian Güdel <cg@dmesg.ch>
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Tested-by: Christian Güdel <cg@dmesg.ch> # 3.14
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add eapd shutup function to alc283_shutup.
It could avoid pop noise from speaker.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Chrome OS was use model name of alc283-dac-wcaps for loading model as default.
Change the model name to same as model name of Chrome OS for future support.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is better to change Mic2-Vref to manual mode.
Manual control Mic2-Vref will solve pop noise issue.
It will improve pop noise for power on, power off, S3 and resume.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Save/restore routing and rate registers during suspend/resume.
This fixes S/PDIF input being disabled after resume.
Tested with Audiophile 24/96.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also restore AK4xxx mixer volumes on resume for M-Audio ICE1712-based cards.
This fixes incorrect (sound working) zero mixer volumes after resume.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add S/PDIF suspend support for M-Audio cards based on ICE1712 chip.
Tested (playback only) on Audiophile 24/96. Capture will probably not work.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent fixups for HP laptops to support the mute LED made the
speaker output silent on some machines.  It turned out that they use
the NID 0x18 for the speaker while it's also used for controlling the
LED via VREF bits although the current driver code blindly assumes
that such a node is a mic pin (where 0x18 is usually so).

This patch fixes the problem by only changing the VREF bits and
keeping the other pin ctl bits.
Reported-and-tested-by: NHui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If it only has single output of HP out of machine.
The driver parser will copy hp_pins to line_out_pins.
hp_pins will empty for alc283_init and alc283_shutup functions.
This will cause not have value for hp_pin_sense.
Add check line_out_type code will solve it .
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>