- 30 5月, 2013 2 次提交
-
-
radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com> Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This narrows the scope of the apple re-POST hack added in: drm/radeon: re-POST the asic on Apple hardware when booted via EFI That patch prevents UVD from working on macs when booted in EFI mode. The original patch fixed macbook2,1 systems which were r5xx and hence have no UVD. Limit the hack to those systems to prevent UVD breakage on newer systems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Acked-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
- 29 5月, 2013 4 次提交
-
-
由 Alex Deucher 提交于
Skip checking crtcs in hardware without them. Avoids checking non-existent hardware. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Newer asics have variable numbers of crtcs. Use that rather than the asic family to determine which crtcs to check. This avoids checking non-existent crtcs or missing crtcs on certain asics. Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Should be 5 rather than 2. Noticed by sroland and glisse on IRC. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
The chip id for SUMO2 isn't used. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935Tested-By: NDave Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 28 5月, 2013 1 次提交
-
-
由 Andrew Jones 提交于
Signed-off-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 5月, 2013 6 次提交
-
-
由 Seung-Woo Kim 提交于
devm_request_threaded_irq is used instead of request_threaded_irq and free_irq is removed. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
devm_kfree does not need for fail case of probe function and for remove function. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
Becuase of order of headers, there are build warnings and they are fixed with this patch. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
Struct device pointer got from platform device pointer is already alsigned as variable, but some functions do not use device pointer. So this patch replaces thoes usages. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
This patch fixes the issue that drm_vblank_get() is failed. The issus occurs when next page flip request is tried if previous page flip event wasn't completed yet and then dpms became off. So this patch make sure that page flip event is completed before dpms goes to off. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Rob Clark 提交于
Rebased. Signed-off-by: NRob Clark <rob@ti.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 22 5月, 2013 12 次提交
-
-
由 Imre Deak 提交于
During DP AUX communication we might time out 1 jiffy too early, because the calculated expiry jiffy value is one less than needed. This is only one reason for false DP AUX timeouts. For a complete solution we also need the following fix, which is now queued for mainline: http://marc.info/?l=linux-kernel&m=136748515710837&w=2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64133Signed-off-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
At the moment wait_event_timeout/wait_event_interruptible_timeout may time out 1 jiffy too early, as the calculated expiry time is 1 less than needed. Besides timing out too early this also means that the calculation of the remaining time will be incorrect and we will pass a non-zero remaining time to user space in case of a time out. This is one reason for the following bugzilla report: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64270Signed-off-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
Signed-off-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
We need this to avoid premature timeouts whenever scheduling a timeout based on the current jiffies value. For an explanation see [1]. The following patches will take the helper into use. Once the more generic solution proposed in the thread at [1] is accepted this patch can be reverted while keeping the follow-up patches. [1] http://marc.info/?l=linux-kernel&m=136854294730957&w=2Signed-off-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
Currently the driver's assumed behavior for a modeset with an attached FB is that the corresponding connector will be switched to DPMS ON mode if it happened to be in DPMS OFF (or another power save mode). This wasn't enforced though if only the FB changed, everything else (format, connector etc.) remaining the same. In this case we only set the new FB base and left the connector in the old power save mode. Fix this by forcing a full modeset whenever there is an attached FB and any affected connector is in a power save mode. V_2: Run the test for encoders in power save mode outside the the test for fb change: user space may have just disabled the encoders but left everything else in place. Make sure the connector list is not empty before running this test. Signed-off-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NEgbert Eich <eich@suse.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61642 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59834 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64178Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> [danvet: Apply Jani's s/connector_off/is_crtc_connector_off bikeshed.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Rob Clark 提交于
The event wouldn't be on any list at this point, so nothing to delete it from. Signed-off-by: NRob Clark <rob@ti.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Lars-Peter Clausen 提交于
free_irq() expects the same pointer that was passed to request_threaded_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_threaded_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
None of these functions actually return a NULL pointer. Hence use IS_ERR() instead. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
exynos_drm_framebuffer_init() does not return NULL. Use IS_ERR instead. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <rob@ti.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <rob@ti.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <rob@ti.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 5月, 2013 8 次提交
-
-
由 Chris Wilson 提交于
Along the modesetting short cut where we skip trying to do a full modeset and instead simply update the framebuffer base registers, we failed to handle any errors reported. This regression has been introduced in commit 94352cf9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jul 5 22:51:56 2012 +0200 drm/i915: push crtc->fb update into pipe_set_base Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Rodrigo Vivi 提交于
At DDX commit Chris mentioned the tendency we have of finding out more PCI IDs only when users report. So Let's add all new reserved Haswell IDs. This patch also fix GT3 names. I'no not sending in separated patche because names are only in few comments and not in variable names. v2: Fix some mobile ids (by Paulo) References: http://bugs.freedesktop.org/show_bug.cgi?id=63701 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Alex Deucher 提交于
v2: fix typo Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Skip UVD handling on them. v2: split has_uvd tracking into separate patch Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Hainan has no display hardware: - no DCE (crtc, uniphy, dac, etc.) - no VGA v2: fix bios fetch v3: fix interrupts Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
- 20 5月, 2013 7 次提交
-
-
由 Alex Deucher 提交于
v2: fix gb_addr_config value Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Avoids overflows on DCE2.x devices. Also clarify the calculation on other asics. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Niels Ole Salscheider 提交于
Add ULL prefix to avoid overflow. Signed-off-by: NNiels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Niels Ole Salscheider 提交于
bool in_mode_set from struct radeon_crtc is not used anymore. Signed-off-by: NNiels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-