The group list must be freed prior to freeing the command otherwise
we have a use-after-free.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nelson Chang says:

====================
net: ethernet: mediatek: some bug fixes for PDAM and HW LRO

1) Add to stop PDMA while stopping the frame engine
2) Modify the register settings for LRO relinquishments
3) Jump out from the waiting loop while LRO relinquishments are done
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

(1) Modify the register settings for LRO relinquishments
(2) Jump out from the waiting loop while LRO relinquishments are done
Signed-off-by: NNelson Chang <nelson.chang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stop PDMA while the frame engine is going to stop.
Signed-off-by: NNelson Chang <nelson.chang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Philippe Reynes says:

====================
net: bcmgenet: only use new api ethtool_{get|set}_link_ksettings

Some times ago, a serie of patches were committed :
- commit 62469c76 ("net: ethernet: bcmgenet: use phydev from struct net_device")
- commit 6b352ebc ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings")
The first patch add a regression on this driver, so it should be reverted.
As the second patch depend on the former, it should be reverted too.

The first patch is buggy because there is a "trick" in this driver.
The structure phydev is kept in the private data when the interface
go down, and used when the interface go up to enable the phy before
the function phy_connect is called.

I don't have this hardware, neither the datasheet. So I won't
update the driver to avoid this trick.

But the real goal of the first serie was to move to the new api
ethtool_{get|set}_link_ksettings. So I provide a new version of
the patch without the "cleaning" of driver to use the phydev
store in the net_device structure.

Changelog:
v3:
- use priv instead of dev (so all the code use the same phydev)
v2:
- use Florian Fainelli patches for the revert instead of Jaedon Shin
- simply use net: bcmgenet: for the prefix of the patch
====================
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 62469c76 ("net: ethernet: bcmgenet: use phydev
from struct net_device") because it causes GENETv1/2/3 adapters to
expose the following behavior after an ifconfig down/up sequence:

PING fainelli-linux (10.112.156.244): 56 data bytes
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!)

This was previously fixed by commit 5dbebbb4 ("net: bcmgenet:
Software reset EPHY after power on") but the commit we are reverting was
essentially making this previous commit void, here is why.

Without commit 62469c76 we would have the following scenario after
an ifconfig down then up sequence:

- bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is
  initialized *before* we get to initialize the UniMAC, this is
  critical to ensure the PHY is in a correct state, priv->phydev is
  valid, this code executes fine

- second time from bcmgenet_mii_probe(), through the normal
  phy_init_hw() call (which arguably could be optimized out)

Everything is fine in that case. With commit 62469c76, we would have
the following scenario to happen after an ifconfig down then up
sequence:

- bcmgenet_close() calls phy_disonnect() which makes dev->phydev become
  NULL

- when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from
  bcmgenet_power_up() to initialize the internal PHY, the NULL check
  becomes true, so we do not reset the PHY, yet we keep going on and
  initialize the UniMAC, causing MAC activity to occur

- we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is
  too late, the PHY is botched, and causes the above bogus pings/packets
  transmission/reception to occur
Reported-by: NJaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 6b352ebc ("net: ethernet: broadcom: bcmgenet:
use new api ethtool_{get|set}_link_ksettings").

We needs to revert the commit 62469c76 ("net: ethernet: bcmgenet:
use phydev from struct net_device"), because this commit add a
regression. As the commit 6b352ebc ("net: ethernet: broadcom:
bcmgenet: use new api ethtool_{get|set}_link_ksettings") depend
on the first one, we also need to revert it first.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This prevent future potential pointer leaks when an unprivileged eBPF
program will read a pointer value from its context. Even if
is_valid_access() returns a pointer type, the eBPF verifier replace it
with UNKNOWN_VALUE. The register value that contains a kernel address is
then allowed to leak. Moreover, this fix allows unprivileged eBPF
programs to use functions with (legitimate) pointer arguments.

Not an issue currently since reg_type is only set for PTR_TO_PACKET or
PTR_TO_PACKET_END in XDP and TC programs that can only be loaded as
privileged. For now, the only unprivileged eBPF program allowed is for
socket filtering and all the types from its context are UNKNOWN_VALUE.
However, this fix is important for future unprivileged eBPF programs
which could use pointers in their context.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

seccomp_phase1() does not exist anymore. Instead, update sample to use
__seccomp_filter(). While at it, set max locked memory to unlimited.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These samples fail to compile as 'struct flow_keys' conflicts with
definition in net/flow_dissector.h. Fix the same by renaming the
structure used in the sample.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jason Baron says:

====================
bnx2x: page allocation failure

While configuring ~500 multicast addrs, we ran into high order
page allocation failures. They don't need to be high order, and
thus I'm proposing to split them into at most PAGE_SIZE allocations.

Below is a sample failure.

[1201902.617882] bnx2x: [bnx2x_set_mc_list:12374(eth0)]Failed to create multicast MACs list: -12
[1207325.695021] kworker/1:0: page allocation failure: order:2, mode:0xc020
[1207325.702059] CPU: 1 PID: 15805 Comm: kworker/1:0 Tainted: G        W
[1207325.712940] Hardware name: SYNNEX CORPORATION 1x8-X4i SSD 10GE/S5512LE, BIOS V8.810 05/16/2013
[1207325.722284] Workqueue: events bnx2x_sp_rtnl_task [bnx2x]
[1207325.728206]  0000000000000000 ffff88012d873a78 ffffffff8267f7c7 000000000000c020
[1207325.736754]  0000000000000000 ffff88012d873b08 ffffffff8212f8e0 fffffffc00000003
[1207325.745301]  ffff88041ffecd80 ffff880400000030 0000000000000002 0000c0206800da13
[1207325.753846] Call Trace:
[1207325.756789]  [<ffffffff8267f7c7>] dump_stack+0x4d/0x63
[1207325.762426]  [<ffffffff8212f8e0>] warn_alloc_failed+0xe0/0x130
[1207325.768756]  [<ffffffff8213c898>] ? wakeup_kswapd+0x48/0x140
[1207325.774914]  [<ffffffff82132afc>] __alloc_pages_nodemask+0x2bc/0x970
[1207325.781761]  [<ffffffff82173691>] alloc_pages_current+0x91/0x100
[1207325.788260]  [<ffffffff8212fa1e>] alloc_kmem_pages+0xe/0x10
[1207325.794329]  [<ffffffff8214c9c8>] kmalloc_order+0x18/0x50
[1207325.800227]  [<ffffffff8214ca26>] kmalloc_order_trace+0x26/0xb0
[1207325.806642]  [<ffffffff82451c68>] ? _xfer_secondary_pool+0xa8/0x1a0
[1207325.813404]  [<ffffffff8217cfda>] __kmalloc+0x19a/0x1b0
[1207325.819142]  [<ffffffffa02fe975>] bnx2x_set_rx_mode_inner+0x3d5/0x590 [bnx2x]
[1207325.827000]  [<ffffffffa02ff52d>] bnx2x_sp_rtnl_task+0x28d/0x760 [bnx2x]
[1207325.834197]  [<ffffffff820695d4>] process_one_work+0x134/0x3c0
[1207325.840522]  [<ffffffff82069981>] worker_thread+0x121/0x460
[1207325.846585]  [<ffffffff82069860>] ? process_one_work+0x3c0/0x3c0
[1207325.853089]  [<ffffffff8206f039>] kthread+0xc9/0xe0
[1207325.858459]  [<ffffffff82070000>] ? notify_die+0x10/0x40
[1207325.864263]  [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180
[1207325.871288]  [<ffffffff826852d2>] ret_from_fork+0x42/0x70
[1207325.877183]  [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180

v2:
 -make use of list_next_entry()
 -only use PAGE_SIZE allocations
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we can have high order page allocations that specify
GFP_ATOMIC when configuring multicast MAC address filters.

For example, we have seen order 2 page allocation failures with
~500 multicast addresses configured.

Convert the allocation for the pending list to be done in PAGE_SIZE
increments.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Acked-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we can have high order page allocations that specify
GFP_ATOMIC when configuring multicast MAC address filters.

For example, we have seen order 2 page allocation failures with
~500 multicast addresses configured.

Convert the allocation for 'mcast_list' to be done in PAGE_SIZE
increments.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I stumbled over a new warning during randconfig testing,
with CONFIG_BPF_SYSCALL disabled:

drivers/net/ethernet/netronome/nfp/nfp_net_offload.c: In function 'nfp_net_bpf_offload':
drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: '*((void *)&res+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: 'res.n_instr' may be used uninitialized in this function [-Werror=maybe-uninitialized]

As far as I can tell, this is a false positive caused by the compiler
getting confused about a function that is partially inlined, but it's
easy to avoid while improving the code:

The nfp_bpf_jit() stub helper for that configuration is unusual as it
is defined in a header file but not marked 'static inline'. By moving
the compile-time check into the caller using the IS_ENABLED() macro,
we can remove that stub and simplify the nfp_net_bpf_offload_prepare()
function enough to unconfuse the compiler.

Fixes: 7533fdc0 ("nfp: bpf: add hardware bpf offload")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get 1 warning when building kernel with W=1:
drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes]

In fact, this function is implemented in
drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called
by no one, thus can be removed.

So this patch removes the unused functions.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get 10 warnings when building kernel with W=1:
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:304:5: warning: no previous prototype for 'cxgb4_dcb_enabled' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:194:5: warning: no previous prototype for 'setup_sge_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:241:6: warning: no previous prototype for 'free_sge_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:268:5: warning: no previous prototype for 'cfg_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:344:6: warning: no previous prototype for 'free_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:353:5: warning: no previous prototype for 'request_msix_queue_irqs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:379:6: warning: no previous prototype for 'free_msix_queue_irqs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:393:6: warning: no previous prototype for 'name_msix_vecs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:433:6: warning: no previous prototype for 'enable_rx_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:442:6: warning: no previous prototype for 'quiesce_rx_uld' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get 2 warnings when building kernel with W=1:
drivers/net/ethernet/marvell/mvneta.c:639:27: warning: no previous prototype for 'mvneta_get_stats64' [-Wmissing-prototypes]
drivers/net/ethernet/marvell/mvneta.c:3529:5: warning: no previous prototype for 'mvneta_ethtool_set_link_ksettings' [-Wmissing-prototypes]

In fact, these two functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get 1 warning when building kernel with W=1:
drivers/net/ethernet/hisilicon/hip04_eth.c:603:22: warning: no previous prototype for 'tx_done' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get 2 warnings when building kernel with W=1:
drivers/net/ethernet/hisilicon/hisi_femac.c:943:5: warning: no previous prototype for 'hisi_femac_drv_suspend' [-Wmissing-prototypes]
drivers/net/ethernet/hisilicon/hisi_femac.c:960:5: warning: no previous prototype for 'hisi_femac_drv_resume' [-Wmissing-prototypes]

In fact, these two functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2016-09-25

Here are a few more Bluetooth & 802.15.4 patches for the 4.9 kernel that
have popped up during the past week:

 - New USB ID for QCA_ROME Bluetooth device
 - NULL pointer dereference fix for Bluetooth mgmt sockets
 - Fixes for BCSP driver
 - Fix for updating LE scan response

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

drivers/net/dsa/mv88e6xxx/chip.c:219:5: warning:
 symbol 'mv88e6xxx_port_read' was not declared. Should it be static?
drivers/net/dsa/mv88e6xxx/chip.c:227:5: warning:
 symbol 'mv88e6xxx_port_write' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

drivers/net/ethernet/emulex/benet/be_main.c:47:25: warning:
 symbol 'be_err_recovery_workq' was not declared. Should it be static?
drivers/net/ethernet/emulex/benet/be_main.c:63:25: warning:
 symbol 'be_wq' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This aligns smc91x with its cousin, namely smc911x.c.
This also allows the driver to run also in a device-tree based lubbock
board build, on which it was tested.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

iq is unsigned, so the error check for iq < 0 has no effect so errors
can slip past this check.  Fix this by making iq signed and also
get_filter_steerq return a signed int so a -ve error can be returned.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree, they are:

1) Consolidate GRE protocol tracker using new GRE protocol definitions,
   patches from Gao Feng.

2) Properly parse continuation lines in SIP helper, update allowed
   characters in Call-ID header and allow tabs in SIP headers as
   specified by RFC3261, from Marco Angaroni.

3) Remove useless code in FTP conntrack helper, also from Gao Feng.

4) Add number generation expression for nf_tables, with random and
   incremental generators. This also includes specific offset to add
   to the result, patches from Laura Garcia Liebana. Liping Zhang
   follows with a fix to avoid a race in this new expression.

5) Fix new quota expression inversion logic, added in the previous
   pull request.

6) Missing validation of queue configuration in nft_queue, patch
   from Liping Zhang.

7) Remove unused ctl_table_path, as part of the deprecation of the
   ip_conntrack sysctl interface coming in the previous batch.
   Again from Liping Zhang.

8) Add offset attribute to nft_hash expression, so we can generate
   any output from a specific base offset. Moreover, check for
   possible overflow, patches from Laura Garcia.

9) Allow to invert dynamic set insertion from packet path, to check
   for overflows in case the set is full.

10) Revisit nft_set_pktinfo*() logic from nf_tables to ensure
    proper initialization of layer 4 protocol. Consolidate pktinfo
    structure initialization for bridge and netdev families.

11) Do not inconditionally drop IPv6 packets that we cannot parse
    transport protocol for ip6 and inet families, let the user decide
    on this via ruleset policy.

12) Get rid of gotos in __nf_ct_try_assign_helper().

13) Check for return value in register_netdevice_notifier() and
    nft_register_chain_type(), patches from Gao Feng.

14) Get rid of CONFIG_IP6_NF_IPTABLES dependency in nf_queue
    infrastructure that is common to nf_tables, from Liping Zhang.

15) Disable 'found' and 'searched' stats that are updates from the
    packet hotpath, not very useful these days.

16) Validate maximum value of u32 netlink attributes in nf_tables,
    this introduces nft_parse_u32_check(). From Laura Garcia.

17) Add missing code to integrate nft_queue with maps, patch from
    Liping Zhang. This also includes missing support ranges in
    nft_queue bridge family.

18) Fix check in nft_payload_fast_eval() that ensure that we don't
    go over the skbuff data boundary, from Liping Zhang.

19) Check if transport protocol is set from nf_tables tracing and
    payload expression. Again from Liping Zhang.

20) Use net_get_random_once() whenever possible, from Gao Feng.

21) Replace hardcoded value by sizeof() in xt_helper, from Gao Feng.

22) Remove superfluous check for found element in nft_lookup.

23) Simplify TCPMSS logic to check for minimum MTU, from Gao Feng.

24) Replace double linked list by single linked list in Netfilter
    core hook infrastructure, patchset from Aaron Conole. This
    includes several patches to prepare this update.

25) Fix wrong sequence adjustment of TCP RST with no ACK, from
    Gao Feng.

26) Relax check for direction attribute in nft_ct for layer 3 and 4
    protocol fields, from Liping Zhang.

27) Add new revision for hashlimit to support higher pps of upto 1
    million, from Vishwanath Pai.

28) Evict stale entries in nf_conntrack when reading entries from
    /proc/net/nf_conntrack, from Florian Westphal.

29) Fix transparent match for IPv6 request sockets, from Krisztian
    Kovacs.

30) Add new range expression for nf_tables.

31) Add missing code to support for flags in nft_log. Expose NF_LOG_*
    flags via uapi and use it from the generic logging infrastructure,
    instead of using xt specific definitions, from Liping Zhang.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	net/netfilter/core.c
	net/netfilter/nf_tables_netdev.c

Resolve two conflicts before pull request for David's net-next tree:

1) Between c73c2484 ("netfilter: nf_tables_netdev: remove redundant
   ip_hdr assignment") from the net tree and commit ddc8b602
   ("netfilter: introduce nft_set_pktinfo_{ipv4, ipv6}_validate()").

2) Between e8bffe0c ("net: Add _nf_(un)register_hooks symbols") and
   Aaron Conole's patches to replace list_head with single linked list.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

nf_log is used by both nftables and iptables, so use XT_LOG_XXX macros
here is not appropriate. Replace them with NF_LOG_XXX.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

NFTA_LOG_FLAGS attribute is already supported, but the related
NF_LOG_XXX flags are not exposed to the userspace. So we cannot
explicitly enable log flags to log uid, tcp sequence, ip options
and so on, i.e. such rule "nft add rule filter output log uid"
is not supported yet.

So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In
order to keep consistent with other modules, change NF_LOG_MASK to
refer to all supported log flags. On the other hand, add a new
NF_LOG_DEFAULT_MASK to refer to the original default log flags.

Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP
and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the
userspace.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Inverse ranges != [a,b] are not currently possible because rules are
composites of && operations, and we need to express this:

	data < a || data > b

This patch adds a new range expression. Positive ranges can be already
through two cmp expressions:

	cmp(sreg, data, >=)
	cmp(sreg, data, <=)

This new range expression provides an alternative way to express this.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The introduction of TCP_NEW_SYN_RECV state, and the addition of request
sockets to the ehash table seems to have broken the --transparent option
of the socket match for IPv6 (around commit a9407000).

Now that the socket lookup finds the TCP_NEW_SYN_RECV socket instead of the
listener, the --transparent option tries to match on the no_srccheck flag
of the request socket.

Unfortunately, that flag was only set for IPv4 sockets in tcp_v4_init_req()
by copying the transparent flag of the listener socket. This effectively
causes '-m socket --transparent' not match on the ACK packet sent by the
client in a TCP handshake.

Based on the suggestion from Eric Dumazet, this change moves the code
initializing no_srccheck to tcp_conn_request(), rendering the above
scenario working again.

Fixes: a9407000 ("netfilter: xt_socket: prepare for TCP_NEW_SYN_RECV support")
Signed-off-by: NAlex Badics <alex.badics@balabit.com>
Signed-off-by: NKOVACS Krisztian <hidden@balabit.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Fabian reports a possible conntrack memory leak (could not reproduce so
far), however, one minor issue can be easily resolved:

> cat /proc/net/nf_conntrack | wc -l = 5
> 4 minutes required to clean up the table.

We should not report those timed-out entries to the user in first place.
And instead of just skipping those timed-out entries while iterating over
the table we can also zap them (we already do this during ctnetlink
walks, but I forgot about the /proc interface).

Fixes: f330a7fd ("netfilter: conntrack: get rid of conntrack timer")
Reported-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Create a new revision for the hashlimit iptables extension module. Rev 2
will support higher pps of upto 1 million, Version 1 supports only 10k.

To support this we have to increase the size of the variables avg and
burst in hashlimit_cfg to 64-bit. Create two new structs hashlimit_cfg2
and xt_hashlimit_mtinfo2 and also create newer versions of all the
functions for match, checkentry and destroy.

Some of the functions like hashlimit_mt, hashlimit_mt_check etc are very
similar in both rev1 and rev2 with only minor changes, so I have split
those functions and moved all the common code to a *_common function.
Signed-off-by: NVishwanath Pai <vpai@akamai.com>
Signed-off-by: NJoshua Hunt <johunt@akamai.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

I am planning to add a revision 2 for the hashlimit xtables module to
support higher packets per second rates. This patch renames all the
functions and variables related to revision 1 by adding _v1 at the
end of the names.
Signed-off-by: NVishwanath Pai <vpai@akamai.com>
Signed-off-by: NJoshua Hunt <johunt@akamai.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

NFT_CT_MARK is unrelated to direction, so if NFTA_CT_DIRECTION attr is
specified, report EINVAL to the userspace. This validation check was
already done at nft_ct_get_init, but we missed it in nft_ct_set_init.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Currently, if the user want to match ct l3proto, we must specify the
direction, for example:
  # nft add rule filter input ct original l3proto ipv4
                                 ^^^^^^^^
Otherwise, error message will be reported:
  # nft add rule filter input ct l3proto ipv4
  nft add rule filter input ct l3proto ipv4
  <cmdline>:1:1-38: Error: Could not process rule: Invalid argument
  add rule filter input ct l3proto ipv4
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Actually, there's no need to require NFTA_CT_DIRECTION attr, because
ct l3proto and protocol are unrelated to direction.

And for compatibility, even if the user specify the NFTA_CT_DIRECTION
attr, do not report error, just skip it.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

It is valid that the TCP RST packet which does not set ack flag, and bytes
of ack number are zero. But current seqadj codes would adjust the "0" ack
to invalid ack number. Actually seqadj need to check the ack flag before
adjust it for these RST packets.

The following is my test case

client is 10.26.98.245, and add one iptable rule:
iptables  -I INPUT -p tcp --sport 12345 -m connbytes --connbytes 2:
--connbytes-dir reply --connbytes-mode packets -j REJECT --reject-with
tcp-reset
This iptables rule could generate on TCP RST without ack flag.

server:10.172.135.55
Enable the synproxy with seqadjust by the following iptables rules
iptables -t raw -A PREROUTING -i eth0 -p tcp -d 10.172.135.55 --dport 12345
-m tcp --syn -j CT --notrack

iptables -A INPUT -i eth0 -p tcp -d 10.172.135.55 --dport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -j SYNPROXY --sack-perm --timestamp --wscale 7
--mss 1460
iptables -A OUTPUT -o eth0 -p tcp -s 10.172.135.55 --sport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -m tcp --tcp-flags SYN,RST,ACK SYN,ACK -j ACCEPT

The following is my test result.

1. packet trace on client
root@routers:/tmp# tcpdump -i eth0 tcp port 12345 -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [S], seq 3695959829,
win 29200, options [mss 1460,sackOK,TS val 452367884 ecr 0,nop,wscale 7],
length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [S.], seq 546723266,
ack 3695959830, win 0, options [mss 1460,sackOK,TS val 15643479 ecr 452367884,
nop,wscale 7], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [.], ack 1, win 229,
options [nop,nop,TS val 452367885 ecr 15643479], length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [.], ack 1, win 226,
options [nop,nop,TS val 15643479 ecr 452367885], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [R], seq 3695959830,
win 0, length 0

2. seqadj log on server
[62873.867319] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.867644] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.869040] Adjusting sequence number from 3695959830->3695959830,
ack from 0->55618628

To summarize, it is clear that the seqadj codes adjust the 0 ack when receive
one TCP RST packet without ack.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The netfilter hook list never uses the prev pointer, and so can be trimmed to
be a simple singly-linked list.

In addition to having a more light weight structure for hook traversal,
struct net becomes 5568 bytes (down from 6400) and struct net_device becomes
2176 bytes (down from 2240).
Signed-off-by: NAaron Conole <aconole@bytheb.org>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-09-24

This series contains updates to i40e and i40evf only.

Harshitha removes the ability to set or advertise X722 to 100 Mbps,
since it is not supported, so we should not be able to advertise or
set the NIC to 100 Mbps.

Alan fixes an issue where deleting a MAC filter did not really delete the
filter in question.  The reason being that the wrong cmd_flag is passed to
the firmware.

Preethi adds the encapsulation checksum offload negotiation flag, so that
we can control it.

Jake cleans up the ATR auto_disable_flags use, since some locations
disable ATR accidentally using the "full" disable by disabling the flag
in the standard flags field.  This permanently forces ATR off instead of
temporarily disabling it.  Then updated checks to include when there are
TCP/IP4 sideband rules in effect, where ATR should be disabled.  Lastly,
adds support to the i40evf driver for setting interrupt moderation values
per queue, like in i40e.

Henry cleans up unreachable code, since i40e_shutdown_adminq() is always
true.

Mitch enables support for adaptive interrupt throttling, since all the
code for it is already in the interrupt handler.  The fixes a rare
case where we might get a VSI with no queues and we try to configure
RSS, which would result in a divide by zero.

Alex fixes an issue where transmit cleanup flow was incorrectly assuming
it could check for the flow director bits after it had unmapped the
buffer.  Then adds a txring_txq() to allow us to convert a i40e_ring/
i40evf_ring to a netdev_tx_queue structure, like ixgbe and fm10k.  This
avoids having to make a multi-line function call for all the areas that
need access to it.  Re-factors the Flow Director filter configuration
out into a separate function, like we did for the standard xmit path.
Cleans up the debugfs hook for Flow Director since it was meant for
debug only.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>