Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 27 8月, 2016 1 次提交
  3. 26 8月, 2016 1 次提交
  5. 25 8月, 2016 1 次提交
  7. 23 8月, 2016 1 次提交
  9. 22 8月, 2016 6 次提交
    • D
      drm/i915: debugfs spring cleaning · 36cdd013
      由 David Weinehall 提交于 
      Just like with sysfs, we do some major overhaul.

Pass dev_priv instead of dev to all feature macros (IS_, HAS_,
INTEL_, etc.). This has the side effect that a bunch of functions
now get dev_priv passed instead of dev.

All calls to INTEL_INFO()->gen have been replaced with
INTEL_GEN().

We want access to to_i915(node->minor->dev) in a lot of places,
so add the node_to_i915() helper to accommodate for this.

Finally, we have quite a few cases where we get a void * pointer,
and need to cast it to drm_device *, only to run to_i915() on it.
Add cast_to_i915() to do this.

v2: Don't introduce extra dev (Chris)

v3: Make pipe_crc_info have a pointer to drm_i915_private instead of
    drm_device. This saves a bit of space, since we never use
    drm_device anywhere in these functions.

    Also some minor fixup that I missed in the previous version.

v4: Changed the code a bit so that dev_priv is passed directly
    to various functions, thus removing the need for the
    cast_to_i915() helper. Also did some additional cleanup.

v5: Additional cleanup of newly introduced changes.

v6: Rebase again because of conflict.
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822105931.pcbe2lpsgzckzboa@boomReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
      36cdd013
    • D
      drm/i915: i915_sysfs.c cleanup · 694c2828
      由 David Weinehall 提交于 
      Various cleanup for i915_sysfs.c; we now use dev_priv whenever
possible. The kdev_to_drm_minor() helper function has been
replaced by one that converts from struct device *
to struct drm_i915_private *.

We already have a seemingly identical helper (kdev_to_i915())
in i915_drv.h. But that one cannot be used here.
Unlike the version in i915_drv.h, this helper
reaches i915 through drm_minor.

v2: Rename kdev_to_i915_dm() to kdev_minor_to_i915() (Chris)
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-4-david.weinehall@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
      694c2828
    • D
      drm/i915: consistent struct device naming · c49d13ee
      由 David Weinehall 提交于 
      We currently have a mix of struct device *device, struct device *kdev,
and struct device *dev (the latter forcing us to refer to
struct drm_device as something else than the normal dev).

To simplify things, always use kdev when referring to struct device.

v2: Replace the dev_to_drm_minor() macro with the inline function
    kdev_to_drm_minor().
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-3-david.weinehall@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
      c49d13ee
    • D
      drm/i915: cosmetic fixes to i915_drv.h · 351c3b53
      由 David Weinehall 提交于 
      Fix minor whitespace issues plus a typo.
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-2-david.weinehall@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
      351c3b53
    • L
      drm/i915/skl: Add support for the SAGV, fix underrun hangs · 656d1b89
      由 Lyude 提交于 
      Since the watermark calculations for Skylake are still broken, we're apt
to hitting underruns very easily under multi-monitor configurations.
While it would be lovely if this was fixed, it's not. Another problem
that's been coming from this however, is the mysterious issue of
underruns causing full system hangs. An easy way to reproduce this with
a skylake system:

- Get a laptop with a skylake GPU, and hook up two external monitors to
  it
- Move the cursor from the built-in LCD to one of the external displays
  as quickly as you can
- You'll get a few pipe underruns, and eventually the entire system will
  just freeze.

After doing a lot of investigation and reading through the bspec, I
found the existence of the SAGV, which is responsible for adjusting the
system agent voltage and clock frequencies depending on how much power
we need. According to the bspec:

"The display engine access to system memory is blocked during the
 adjustment time. SAGV defaults to enabled. Software must use the
 GT-driver pcode mailbox to disable SAGV when the display engine is not
 able to tolerate the blocking time."

The rest of the bspec goes on to explain that software can simply leave
the SAGV enabled, and disable it when we use interlaced pipes/have more
then one pipe active.

Sure enough, with this patchset the system hangs resulting from pipe
underruns on Skylake have completely vanished on my T460s. Additionally,
the bspec mentions turning off the SAGV	with more then one pipe enabled
as a workaround for display underruns. While this patch doesn't entirely
fix that, it looks like it does improve the situation a little bit so
it's likely this is going to be required to make watermarks on Skylake
fully functional.

This will still need additional work in the future: we shouldn't be
enabling the SAGV if any of the currently enabled planes can't enable WM
levels that introduce latencies >= 30 µs.

Changes since v11:
 - Add skl_can_enable_sagv()
 - Make sure we don't enable SAGV when not all planes can enable
   watermarks >= the SAGV engine block time. I was originally going to
   save this for later, but I recently managed to run into a machine
   that was having problems with a single pipe configuration + SAGV.
 - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit
 - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE
 - Move printks outside of mutexes
 - Don't print error messages twice
Changes since v10:
 - Apparently sandybridge_pcode_read actually writes values and reads
   them back, despite it's misleading function name. This means we've
   been doing this mostly wrong and have been writing garbage to the
   SAGV control. Because of this, we no longer attempt to read the SAGV
   status during initialization (since there are no helpers for this).
 - mlankhorst noticed that this patch was breaking on some very early
   pre-release Skylake machines, which apparently don't allow you to
   disable the SAGV. To prevent machines from failing tests due to SAGV
   errors, if the first time we try to control the SAGV results in the
   mailbox indicating an invalid command, we just disable future attempts
   to control the SAGV state by setting dev_priv->skl_sagv_status to
   I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg.
 - Move mutex_unlock() a little higher in skl_enable_sagv(). This
   doesn't actually fix anything, but lets us release the lock a little
   sooner since we're finished with it.
Changes since v9:
 - Only enable/disable sagv on Skylake
Changes since v8:
 - Add intel_state->modeset guard to the conditional for
   skl_enable_sagv()
Changes since v7:
 - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's
   all we use it for anyway)
 - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification
 - Fix a styling error that snuck past me
Changes since v6:
 - Protect skl_enable_sagv() with intel_state->modeset conditional in
   intel_atomic_commit_tail()
Changes since v5:
 - Don't use is_power_of_2. Makes things confusing
 - Don't use the old state to figure out whether or not to
   enable/disable the sagv, use the new one
 - Split the loop in skl_disable_sagv into it's own function
 - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail()
Changes since v4:
 - Use is_power_of_2 against active_crtcs to check whether we have > 1
   pipe enabled
 - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0
   enabled
 - Call skl_sagv_enable/disable() from pre/post-plane updates
Changes since v3:
 - Use time_before() to compare timeout to jiffies
Changes since v2:
 - Really apply minor style nitpicks to patch this time
Changes since v1:
 - Added comments about this probably being one of the requirements to
   fixing Skylake's watermark issues
 - Minor style nitpicks from Matt Roper
 - Disable these functions on Broxton, since it doesn't have an SAGV
Signed-off-by: NLyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com
[mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
      656d1b89
    • D
      drm/i915: Update DRIVER_DATE to 20160822 · d5d0804f
      由 Daniel Vetter 提交于 
      Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      d5d0804f
  11. 20 8月, 2016 1 次提交
  13. 19 8月, 2016 9 次提交
  15. 15 8月, 2016 12 次提交
  17. 12 8月, 2016 2 次提交
    • C
      drm/i915: Use SSE4.1 movntdqa to accelerate reads from WC memory · 0b1de5d5
      由 Chris Wilson 提交于 
      This patch provides the infrastructure for performing a 16-byte aligned
read from WC memory using non-temporal instructions introduced with sse4.1.
Using movntdqa we can bypass the CPU caches and read directly from memory
and ignoring the page attributes set on the CPU PTE i.e. negating the
impact of an otherwise UC access. Copying using movntdqa from WC is almost
as fast as reading from WB memory, modulo the possibility of both hitting
the CPU cache or leaving the data in the CPU cache for the next consumer.
(The CPU cache itself my be flushed for the region of the movntdqa and on
later access the movntdqa reads from a separate internal buffer for the
cacheline.) The write back to the memory is however cached.

This will be used in later patches to accelerate accessing WC memory.

v2: Report whether the accelerated copy is successful/possible.
v3: Function alignment override was only necessary when using the
function target("sse4.1") - which is not necessary for emitting movntdqa
from __asm__.
v4: Improve notes on CPU cache behaviour vs non-temporal stores.
v5: Fix byte offsets for unrolled moves.
v6: Find all remaining typos of "movntqda", use kernel_fpu_begin.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-2-git-send-email-chris@chris-wilson.co.uk
      0b1de5d5
    • C
      drm/i915: Support for creating write combined type vmaps · d31d7cb1
      由 Chris Wilson 提交于 
      vmaps has a provision for controlling the page protection bits, with which
we can use to control the mapping type, e.g. WB, WC, UC or even WT.
To allow the caller to choose their mapping type, we add a parameter to
i915_gem_object_pin_map - but we still only allow one vmap to be cached
per object. If the object is currently not pinned, then we recreate the
previous vmap with the new access type, but if it was pinned we report an
error. This effectively limits the access via i915_gem_object_pin_map to a
single mapping type for the lifetime of the object. Not usually a problem,
but something to be aware of when setting up the object's vmap.

We will want to vary the access type to enable WC mappings of ringbuffer
and context objects on !llc platforms, as well as other objects where we
need coherent access to the GPU's pages without going through the GTT

v2: Remove the redundant braces around pin count check and fix the marker
     in documentation (Chris)

v3:
- Add a new enum for the vmalloc mapping type & pass that as an argument to
   i915_object_pin_map. (Tvrtko)
- Use PAGE_MASK to extract or filter the mapping type info and remove a
   superfluous BUG_ON.(Tvrtko)

v4:
- Rename the enums and clean up the pin_map function. (Chris)

v5: Drop the VM_NO_GUARD, minor cosmetics.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-1-git-send-email-chris@chris-wilson.co.uk
      d31d7cb1
  19. 11 8月, 2016 1 次提交
  21. 10 8月, 2016 3 次提交
  23. 08 8月, 2016 1 次提交
  25. 06 8月, 2016 1 次提交