- 28 8月, 2006 2 次提交
-
-
由 Tom Zanussi 提交于
Here's updated documentation for the relay interface, rewritten to match the relayfs->relay changes. It also moves relayfs.txt to relay.txt in the process. It includes the changes to relayfs.txt previously posted by Randy Dunlap, thanks for those. The relay-apps examples have also been updated to match, and can be found on the sourceforge relayfs website. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Sergey Vlasov noticed that there is not kernel.suid_dumpable, but fs.suid_dumpable. How KERN_SETUID_DUMPABLE ended up in fs_table[]? Hell knows... Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 8月, 2006 1 次提交
-
-
由 Evgeniy Polyakov 提交于
I was asked several times to include userspace example code into Documentation, so if there is no policy against it, consider attached patch for 2.6.18. This program works with included Documentation/connector/cn_test.c connector module. Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2006 1 次提交
-
-
由 Alexey Dobriyan 提交于
Closes #2804. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 18 8月, 2006 2 次提交
-
-
由 Jon Loeliger 提交于
Also accept "local-mac-address". However the old "address" is now obsolete, but accepted for backwards compatibility. It should be removed after all device trees have been converted to use "mac-address". Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jan "Yenya" Kasprzak 提交于
this minor patch fixes the description of net.ipv4.tcp_mem sysctl in ip-sysctl.txt - the headline names the values "min, pressure, max", while the description uses the "low, pressure, high" values. Both tcp_rmem and tcp_wmem descriptions use the "min, pressure, max" values, so I have changed the tcp_mem to match this and not vice versa. Signed-off-by: NJan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2006 1 次提交
-
-
由 Edgar Hucek 提交于
Add basic Machine detection to imacfb and some Ducumentation bits for imacfb. Signed-off-by: NEdgar Hucek <hostmaster@ed-soft.at> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 8月, 2006 1 次提交
-
-
由 Brandon Philips 提交于
block/genhd.c no longer in drivers/. Update Documentation/kobjects.txt Signed-off-by: NBrandon Philips <brandon@ifup.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 8月, 2006 1 次提交
-
-
由 Maxime Bizon 提交于
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 8月, 2006 1 次提交
-
-
由 Or Gerlitz 提交于
Remove references to the IPoIB IETF working group as it has been closed. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 03 8月, 2006 2 次提交
-
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
http://www.suse.cz/development/linux-usb/ doesn't exist anymore. Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 8月, 2006 10 次提交
-
-
由 Mattia Dongili 提交于
I just stumbled on this bug/feature, this is how to reproduce it: # echo 450000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq # echo 450000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq # echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor # cpufreq-info -p 450000 450000 powersave # echo 1800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq ; echo $? 0 # cpufreq-info -p 450000 450000 powersave Here it is. The kernel refuses to set a min_freq higher than the max_freq but it allows a max_freq lower than min_freq (lowering min_freq also). This behaviour is pretty straightforward (but undocumented) and it doesn't return an error altough failing to accomplish the requested action (set min_freq). The problem (IMO) is basically that userspace is not allowed to set a full policy atomically while the kernel always does that thus it must enforce an ordering on operations. The attached patch returns -EINVAL if trying to increase frequencies starting from scaling_min_freq and documents the correct ordering of writes. Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: Dominik Brodowski <linux at dominikbrodowski.net> Signed-off-by: NDave Jones <davej@redhat.com> --
-
由 Thomas Horsley 提交于
I spent a long time the other day trying to examine an initrd image on a fedora core 5 system because the initrd.txt file is apparently obsolete. Here is a patch which I hope will reduce future confusion for others. Signed-off-by: NThomas Horsley <tom.horsley@ccur.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland McGrath 提交于
The latest toolchains can produce a new ELF section in DSOs and dynamically-linked executables. The new section ".gnu.hash" replaces ".hash", and allows for more efficient runtime symbol lookups by the dynamic linker. The new ld option --hash-style={sysv|gnu|both} controls whether to produce the old ".hash", the new ".gnu.hash", or both. In some new systems such as Fedora Core 6, gcc by default passes --hash-style=gnu to the linker, so that a standard invocation of "gcc -shared" results in producing a DSO with only ".gnu.hash". The new ".gnu.hash" sections need to be dealt with the same way as ".hash" sections in all respects; only the dynamic linker cares about their contents. To work with older dynamic linkers (i.e. preexisting releases of glibc), a binary must have the old ".hash" section. The --hash-style=both option produces binaries that a new dynamic linker can use more efficiently, but an old dynamic linker can still handle. The new section runs afoul of the custom linker scripts used to build vDSO images for the kernel. On ia64, the failure mode for this is a boot-time panic because the vDSO's PT_IA_64_UNWIND segment winds up ill-formed. This patch addresses the problem in two ways. First, it mentions ".gnu.hash" in all the linker scripts alongside ".hash". This produces correct vDSO images with --hash-style=sysv (or old tools), with --hash-style=gnu, or with --hash-style=both. Second, it passes the --hash-style=sysv option when building the vDSO images, so that ".gnu.hash" is not actually produced. This is the most conservative choice for compatibility with any old userland. There is some concern that some ancient glibc builds (though not any known old production system) might choke on --hash-style=both binaries. The optimizations provided by the new style of hash section do not really matter for a DSO with a tiny number of symbols, as the vDSO has. If someone wants to use =gnu or =both for their vDSO builds and worry less about that compatibility, just change the option and the linker script changes will make any choice work fine. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andi Kleen <ak@muc.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pete Zaitcev 提交于
Change "Thrid" into "Third", and realign similarly to other entries. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Cc: <device@lanana.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
A few cleanups to SubmittingPatches: - mention SubmitChecklist - remove mention of my simple patch script tools - remove last-updated line Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rolf Eike Beer 提交于
kernel/workqueue.c was omitted from generating kernel documentation. This adds a new section "Workqueues and Kevents" and adds documentation for some of the functions. Some functions in this file already had DocBook-style comments, now they finally become visible. Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Clean up kernel-doc comments in drivers/pci/search.c (line sizes and typos). Enable that source file in DocBook/kernel-api.tmpl. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
insert_resource() was unexported, so kernel-doc needs to be told to search kernel/resource.c for internal functions instead of exported functions so that it won't report an error. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
Update hotplug cpu documentation to clearly state when to use register_cpu_notifier() and register_hotcpu_notifier. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shailabh Nagar 提交于
Enable delay accounting by default so that feature gets coverage testing without requiring special measures. Earlier, it was off by default and had to be enabled via a boot time param. This patch reverses the default behaviour to improve coverage testing. It can be removed late in the kernel development cycle if its believed users shouldn't have to incur any cost if they don't want delay accounting. Or it can be retained forever if the utility of the stats is deemed common enough to warrant keeping the feature on. Signed-off-by: NShailabh Nagar <nagar@watson.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 7月, 2006 4 次提交
-
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ju, Seokmann 提交于
There was an issue in the data structure defined by megaraid driver casuing "kernel unaligned access.." messages to be displayed during IOCTL on IA64 platform. The issue has been reported/fixed by Sakurai Hiroomi [sakurai_hiro@soft.fujitsu.com]. Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Ju, Seokmann 提交于
With this patch, driver will protect data corruption created by INQUIRY with EVPD request to megaraid controllers. As specified in the changelog, megaraid F/W already has fixed the issue and being under process of release. Meanwhile, driver will protect the system with this patch. Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Ju, Seokmann 提交于
This patch contains - a fix for 64-bit DMA capability check in megaraid_{mm,mbox} driver. - includes changes (going back to 32-bit DMA mask if 64-bit DMA mask failes) suggested by James with previous patch. - addition of SATA 150-4/6 as commented by Vasily Averin. With patch, the driver access PCIconfiguration space with dedicated offset to read a signature. If the signature read, it means that the controller has capability to handle 64-bit DMA. Without this patch, the driver used to blindly claim 64-bit DMA capability. The issue has been reported by Vasily Averin [vvs@sw.ru]. Thank you Vasily for the reporting. Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 25 7月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
Add bridge netfilter deferred output hooks to feature-removal-schedule and disable them by default. Until their removal they will be activated by the physdev match when needed. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 7月, 2006 8 次提交
-
-
由 Steven Rostedt 提交于
This patch removes the reference to set_wmb from memory-barriers.txt since it shouldn't be used. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shailabh Nagar 提交于
Change documentation and example program to reflect the flow control issues being addressed by the cpumask changes. Signed-off-by: NShailabh Nagar <nagar@watson.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shailabh Nagar 提交于
Send per-tgid data only once during exit of a thread group instead of once with each member thread exit. Currently, when a thread exits, besides its per-tid data, the per-tgid data of its thread group is also sent out, if its thread group is non-empty. The per-tgid data sent consists of the sum of per-tid stats for all *remaining* threads of the thread group. This patch modifies this sending in two ways: - the per-tgid data is sent only when the last thread of a thread group exits. This cuts down heavily on the overhead of sending/receiving per-tgid data, especially when other exploiters of the taskstats interface aren't interested in per-tgid stats - the semantics of the per-tgid data sent are changed. Instead of being the sum of per-tid data for remaining threads, the value now sent is the true total accumalated statistics for all threads that are/were part of the thread group. The patch also addresses a minor issue where failure of one accounting subsystem to fill in the taskstats structure was causing the send of taskstats to not be sent at all. The patch has been tested for stability and run cerberus for over 4 hours on an SMP. [akpm@osdl.org: bugfixes] Signed-off-by: NShailabh Nagar <nagar@watson.ibm.com> Signed-off-by: NBalbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shailabh Nagar 提交于
Some documentation for delay accounting. Signed-off-by: NShailabh Nagar <nagar@watson.ibm.com> Signed-off-by: NBalbir Singh <balbir@in.ibm.com> Cc: Jes Sorensen <jes@sgi.com> Cc: Peter Chubb <peterc@gelato.unsw.edu.au> Cc: Erich Focht <efocht@ess.nec.de> Cc: Levent Serinol <lserinol@gmail.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shailabh Nagar 提交于
Create a "taskstats" interface based on generic netlink (NETLINK_GENERIC family), for getting statistics of tasks and thread groups during their lifetime and when they exit. The interface is intended for use by multiple accounting packages though it is being created in the context of delay accounting. This patch creates the interface without populating the fields of the data that is sent to the user in response to a command or upon the exit of a task. Each accounting package interested in using taskstats has to provide an additional patch to add its stats to the common structure. [akpm@osdl.org: cleanups, Kconfig fix] Signed-off-by: NShailabh Nagar <nagar@us.ibm.com> Signed-off-by: NBalbir Singh <balbir@in.ibm.com> Cc: Jes Sorensen <jes@sgi.com> Cc: Peter Chubb <peterc@gelato.unsw.edu.au> Cc: Erich Focht <efocht@ess.nec.de> Cc: Levent Serinol <lserinol@gmail.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shailabh Nagar 提交于
Initialization code related to collection of per-task "delay" statistics which measure how long it had to wait for cpu, sync block io, swapping etc. The collection of statistics and the interface are in other patches. This patch sets up the data structures and allows the statistics collection to be disabled through a kernel boot parameter. Signed-off-by: NShailabh Nagar <nagar@watson.ibm.com> Signed-off-by: NBalbir Singh <balbir@in.ibm.com> Cc: Jes Sorensen <jes@sgi.com> Cc: Peter Chubb <peterc@gelato.unsw.edu.au> Cc: Erich Focht <efocht@ess.nec.de> Cc: Levent Serinol <lserinol@gmail.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rolf Eike Beer 提交于
pci_dac_set_dma_mask() gives only a single match in the whole kernel tree and that's in this doc file. The best candidate for replacement is pci_dac_dma_supported(). Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Cc: Greg KH <greg@kroah.com> Acked-by: N"David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nathan Scott 提交于
The default ramdisk blocksize is actually 1024, not 512 bytes. Also fixes up some trailing whitespace issues. Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 7月, 2006 1 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> ---
-
- 13 7月, 2006 4 次提交
-
-
由 Adrian Bunk 提交于
Implement the scheduled unexport of insert_resource. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Moulder 提交于
Text from the back of the box, for your information/amusement: USB DATA CABLE FOR K700 Series The USB Cable is an ideal link between your mobile phone and PC. Employing the user-friendiy [sic] USB standard,its capacity for rapid data transfer enables functions such as synchronization of phone book and calendar,as well as Internet browsing via a modem-enabled phone.Autual [sic] connection speed is dependent on phone capacity. MADE IN CHINA From: Peter Moulder <Peter.Moulder@infotech.monash.edu.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hans de Goede 提交于
Documentation update for the new bank1_types module param. Also add what we know about different revisions of the uGuru and a note that the abituguru driver unfortunatly does not work with the latest and greatest motherboards, which have what I think is revision 4 of the uGuru. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
We have a new mailing list dedicated to linux i2c: http://lists.lm-sensors.org/mailman/listinfo/i2cSigned-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-