Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NSergiusz Urbaniak <sergiusz.urbaniak@googlemail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon
Roland SH-201 table entry as template.  USB MIDI and audio was tested
with Muse and Audacity.
Signed-off-by: NJohn F Leach <jfleach@jfleach.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Roland UM-ONE midi usb interface differs from Roland UM-1.
Signed-off-by: NDaniele Guerrieri <d.guerrieri@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for Starr Labs USB MIDI devices such as the Z7S, which are
based on an FTDI serial UART chip.

Based on a patch by Daniel Mack.
Signed-off-by: NKristian Amlie <kristian@amlie.name>
Acked-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NKazutomo Yoshii <kazutomo.yoshii@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NMiller Puckette <msp@ucsd.edu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for Roland/BOSS BR-800 (0582:011e) to snd-usb-audio driver.

This allows playback and recording, which has been tested and found to
work. The third interface should be MIDI (MTC/SMPTE?) for DAW interface
and is set as per ME-25, but this has not been tested. SDHC card access
is already supported by usb-storage for Backup/Rhythm Editor/Wave
Convertor mode which should not conflict with this.
Signed-off-by: NDavid G Turner <dgturner@iee.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make use of the freshly introduced methods to re-use standard mixer
handling and add some controls that are hidden but implemented in a
standard conform way on M-Audio's FastTrack devices.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Original-code-by: NFelix Homann <linuxaudio@showlabor.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

That way, the class compliant MIDI interface is also handled.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Reported-and-tested-by: NGrant Diffey <gdiffey@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NDaniel Mack <zonque@gmail.com>
Reported-by: NJeffrey Scott Flesher <jeffrey.scott.flesher@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NDaniel Mack <zonque@gmail.com>
Reported-and-tested-by: NFrédéric Jaume <frederic.jaume@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This was a flaw in the reading of the spec tables - Native Instrument's
"Komplete Audio 6" device has no such extra controls.

This patch also fixes the device name in two comments.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This new device by Native Instruments is also compliant to the USB
standard v2.0, but hides this detail at when connected.

It needs the same boot quirks than other models, and also has two
non-class-compliant mixer controls.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NKeith A. Milner <maillist@superlative.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk for the Cakewalk UM-1G USB MIDI interface in
"advanced driver" mode.  (It already works in standard mode.)
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The MK2 generation of Native Instruments' sound cards are in fact
compliant to the USB audio standard of version 2 and other approved USB
standards. However, they come up as vendor-specific device when first
connected but can be told to come up with a new set of descriptors
upon their next enumeration. The interfaces announced by the new
descriptors will be handled by the kernel's class drivers. This is done
by issuing a vendor specific device request and sending the device to
reset.

There are also some vendor-specific USB requests for some mixer elements
that can't be exported in a standard compliant way. The driver now
supports them with quirks handling mechanisms.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJoseph Teichman <josteich@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the 24-bit audio I/Os of the Edirol SD-90 interface.
Reported-any-tested-by: NJim Grusendorf <alsa-user@grusendorf.ca>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk entry for the Novation Launchpad USB MIDI controller.

QUIRK_MIDI_FASTLANE gets renamed to *_RAW_BYTES because this quirk type
is now shared by different devices.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Tested-by: NJakob Flierl <jakob.flierl@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add quirks for more devices (according to driver V.3.0.4-2).
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk to make the BOSS ME-25 work.
Many thanks to Kees van Veen.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk for the Roland/Cakewalk A-300PRO/A-500PRO/A-800PRO keyboards.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk for the other logical device of the PCR-1 so that not only
the MIDI interface but also the audio interface works.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The M-Audio Fast Track Ultra series devices did not play sound correctly
at 44.1/88.2 kHz. Changing the output endpoint attribute to adaptive
fixes this.
Signed-off-by: NFelix Homann <fexpop@web.de>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Match usb ids in usb/quirks-table.h for some Hauppage HVR-950Q models
and for the HVR850 model to those ids at the end of au0828-cards.c

Thanks to nhJm449 for pointing out the problem.
Signed-off-by: NJohn S Gruber <JohnSGruber@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The decoding/encoding is based on own reverse-engineering. Both control and
data ports are handled. Writing to control port supports SysEx events only,
as this is the only type of messages that MPD16 recognizes.
Signed-off-by: NKrzysztof Foltman <wdev@foltman.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds basic support for M-Audio's Fast Track Ultra series of USB
audio interfaces. It is a refactored version of the patch Clemens
Ladisch posted some time ago. Neither playback nor capturing work
properly at 44100 Hz (don't know why).
The other sampling rates work properly. There's no support for the DSP
mixer, yet.
Signed-off-by: NFelix Homann <fexpop@web.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the parser to correctly handle v2 descriptors with multiple
format bits set.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In preparation for USB audio 2.0 support, change the audioformat
structure so that it uses a bitmask to specify possible formats.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up the usb audio driver by factoring out a lot of functions to
separate files. Code for procfs, quirks, urbs, format parsers etc all
got a new home now.

Moved almost all special quirk handling to quirks.c and introduced new
generic functions to handle them, so the exceptions do not pollute the
whole driver.

Renamed usbaudio.c to card.c because this is what it actually does now.
Renamed usbmidi.c to midi.c for namespace clarity.
Removed more things from usbaudio.h.

The non-standard drivers were adopted accordingly.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the Edirol UA-1000 to the UA-101 driver.

Both devices behave the same, so we just have to shuffle around some
interface numbers and name strings.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the definitions from linux/usb/audio.h all over the ALSA USB audio
driver and add some missing definitions there as well.

Use the endpoint attribute macros from linux/usb/ch9 and remove the own
things from sound/usb/usbaudio.h.

Now things are also nicely prefixed which makes understanding the code
easier.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris J Arges <christopherarges@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Here's a patch that adds MIDI support through USB for one of the Access
Music synths, the VirusTI.

The synth uses standard USBMIDI protocol on its USB interface 3, although
it does signal "vendor specific" class. A magic string has to be sent on
interface 3 to enable the sending of MIDI from the synth (this string was
found by sniffing usb communication of the Windows driver). This is all
my patch does, and it works on my computer.

Please note that the synth can also do standard usb audio I/O on its
interfaces 2&3, which already works with the current snd-usb-audio driver,
except for the audio input from the synth. I'm going to work on it when I
have some time.
Signed-off-by: NSebastien Alaiwan <sebastien.alaiwan@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> (cosmetics, list terminator)
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Detect the HVR-950Q HVR-850 urb data alignment quirk using usbquirk.h
rather than using a case statement in snd_usb_audio_probe.
Signed-off-by: NJohn S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add experimental support for the Edirol UA-101 audio/MIDI interface.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the Roland UA-1G audio interface.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch changes yet again the ID for the TTA cards, resulting in a
more reasonable name:
 1 [Aureon51MkII   ]: USB-Audio - Aureon5.1MkII
    TerraTec Aureon5.1MkII at usb-0000:00:03.0-2, full speed
Signed-off-by: NAndrea Borgia <andrea@borgia.bo.it>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>