TSEC0 is connected to Vitesse 7385 5-port switch. The switch
isn't connected to any mdio bus, the link to the switch is fixed
to Full-duplex 1000 Mb/s (no pause).

This patch fixes following failure during bootup:

mdio@24520:01 not found
eth0: Could not attach to PHY
IP-Config: Failed to open eth0
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

commit b31a1d8b ("gianfar: Convert
gianfar to an of_platform_driver") introduced a child node for
the ethernet@25000 controller, but no address and size cells
specifiers were added, and that makes dtc unhappy:

DTC: dts->dtb  on file "arch/powerpc/boot/dts/mpc8313erdb.dts"
Warning (reg_format): "reg" property in /soc8313@e0000000/ethernet@25000/mdio@25520 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

I noticed this doing some randconfig testing (.config below).  I have
CONFIG_PM but no CONFIG_SUSPEND.  Bug is against mainline.

arch/powerpc/sysdev/built-in.o: In function `ipic_suspend':
ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [sub-make] Error 2

Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be
CONFIG_SUSPEND.  d49747bd introduced
this.

Fix build when we have CONFIG_PM but no CONFIG_SUSPEND.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (40 commits)
  Blackfin arch: Remove outdated code
  Blackfin arch: Fix udelay implementation
  Blackfin arch: Update Copyright information
  Blackfin arch: Add BF561 PPI POLS, POLC Masks
  Blackfin arch: Update CM-BF527 kernel config
  Blackfin arch: define bfin_memmap as static since it is only used here
  Blackfin arch: cplb mananger: use a do...while loop rather than a for loop
  Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails
  Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files
  Blackfin arch: build jtag tty driver as a module by default
  Blackfin arch: fix 2 bugs related to debug
  Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
  Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
  Blackfin arch: base SIC_IWR# programming on whether the MMR exists
  Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
  Blackfin arch: fixup board init function name
  Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
  Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed
  Blackfin arch: sync reboot handler with version in u-boot
  Blackfin arch: Faster Implementation of csum_tcpudp_nofold()
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Kill bogus TPC/address truncation during 32-bit faults.
  sparc: fixup for sparseirq changes
  sparc64: Validate kernel generated fault addresses on sparc64.
  sparc64: On non-Niagara, need to touch NMI watchdog in NOHZ mode.
  sparc64: Implement NMI watchdog on capable cpus.
  sparc: Probe PMU type and record in sparc_pmu_type.
  sparc64: Move generic PCR support code to seperate file.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  sunrpc: fix rdma dependencies
  e1000: Fix PCI enable to honor the need_ioport flag
  sgi-xp: link XPNET's net_device_ops to its net_device structure
  pcnet_cs: Fix misuse of the equality operator.
  hso: add new device id's
  dca: redesign locks to fix deadlocks
  cassini/sungem: limit reaches -1, but 0 tested
  net: variables reach -1, but 0 tested
  qlge: bugfix: Add missing netif_napi_del call.
  qlge: bugfix: Add flash offset for second port.
  qlge: bugfix: Fix endian issue when reading flash.
  udp: increments sk_drops in __udp_queue_rcv_skb()
  net: Fix userland breakage wrt. linux/if_tunnel.h
  net: packet socket packet_lookup_frame fix

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: Remove non exported references from pcf50633

The removed version with the loop registers saved on the stack was
originally intended to workaround the missing toolchain support for
LoopReg Clobbers.

Since our toolchain now supports these there is no point in keeping this
workaround. And since we don't touch LoopRegs anymore we're no longer
subject for ANOMALY_05000312.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Avoid possible overflow during 32*32->32 multiplies.
Reported-by: NMarco Reppenhagen <marco.reppenhagen@auerswald.de>
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

use a do...while loop rather than a for loop to get slightly better
optimization and to avoid gcc "may be used uninitialized" warnings ...
we know that the [id]cplb_nr_bounds variables will never be 0, so this
is OK
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Enable null pointer checking for ICPLBs. The code was there but for
some reason I had commented it out at some stage during development.

Should restrict this to 1K since atomic ops start there.
Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

 - unable to single step over emuexcpt instruction
 - gdbproxy goes into infinite loop when doing gdb does "next" over
   "emuexcpt"

Don't decrement PC after software breakpoint.
Signed-off-by: NJie Zhang <jie.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NBryan Wu <cooloney@kernel.org>

bss_l2 section is garbage when the data in this section is used by
_bfin_relocate_l1_mem, so move the zero out function ahead.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

base SIC_IWR# programming on whether the MMR exists
rather than having to maintain another list of processors
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this
already by stubbing things out
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Avoid conditional branch instructions during carry bit additions.
Special thanks to Bernd.
Simplify: Use ((len + proto) << 8) like every other __LITTLE_ENDIAN__ machine

Cc: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

[Mike Frysinger <vapier.adi@gmail.com>: keep the ifdef nest down]
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NGrace Pan <grace.pan@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

[Mike Frysinger <vapier.adi@gmail.com>:
 - setup P_DEFAULT_BOOT_SPI_CS  for every arch based on
   the default bootrom behavior and convert all our boards
   to it
 - revert previous anomaly change ... bf51x is not affected
   by anomaly 05000353]
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

remove subscribers-only marking as the list is
automatically & silently moderated for people
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

merge more of the bf54x and !bf54x gpio code together to
cut down on #ifdef mess
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NJie Zhang <jie.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This patch changes the gpio_free implementations for the blackfin
architecture.
Signed-off-by: NUwe Kleine-Koenig <ukleinek@strlen.de>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Make sure we don't accidently re-enable interrupts if we are being
called in atomic context
Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

when requesting a GPIO for the first time, the POLAR setting is not
set to a sane state.  this can lead to indeterminate behavior that
cannot be resolved without an explicit write to the Blackfin port POLAR
register.

when requesting a GPIO for the first time via gpio_request(), the POLAR
setting for the GPIO in question should be set to sane state.  this
should occur if the GPIO has not been allocated in any other way.

some examples:
 - when doing something like "request_irq(); gpio_request();" on the
   same GPIO, the POLAR setting should not be reset.
 - when doing "gpio_request(); gpio_request();" on the same GPIO, the
   POLAR setting should be reset only the first time and not the second.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>