- 08 2月, 2016 18 次提交
-
-
由 Alexander Usyskin 提交于
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The bus data transfer interface was missing the check if the device is in enabled state, this may lead to stack corruption during link reset. Cc: <stable@vger.kernel.org> #4.0 Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Call wake_up cl->ev_wait only in case there is no bus client registered to the event notification. Second, since we don't have exclusive waiter wake_up_interruptible_all is not used correctly here. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
In this particular case this more correct and safer to check if the RX event is set in the event mask rather than query waitqueue_active Since the check is already performed in the mei_cl_bus_rx_event function, it is just required to check for its return value. Second, since we don't have exclusive waiter wake_up_interruptible_all is not used correctly here. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
In case of link reset all waiting readers should be interrupted. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Switch using cl->rx_wait wait queue also for amthif, there is nothing special about amthif in that matter in Rx flow. The cl->wait is reserved for hbm flows and asynchronous events Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Remove duplicated parameter validation from mei_amthif_write functions, The parameter check is already performed by the caller function mei_write Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Now when we have per client rd_completed list we can remove the amthif specific amthif_rd_complete_list. In addition in the function mei_amthif_read do not loop over the rd_completed list like the original code as the code path is unlocked. Reviewed-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
A next amthif write can be executed only after the previous one has completed. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
The driver uses three names file, fp, and file_object for struct file type. To improve code clarity and adjust to my taste rename file_object to more common and shorter fp. Reviewed-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
The struct file file pointer is used as an opaque handle to for a connected client, for this part the pointer should be immutable and should be set to count. Reviewed-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Since the driver now uses a list for storing read packets instead of single variable a pending read is no longer blocking other connections. A pending read will be discarded up the file closure. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
If empty message come from FW (buf_idx == 0) then the current code will still try to copy data from not filled buffer to the user-space, instead the code should behave the same as when end of a message has been reached, clean resources and return 0 Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
If registering of character device failed stop the device properly. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
There is a possible integer overflow following by a buffer overflow when accumulating messages coming from the FW to compose a full payload. Occurrence of wrap around has to be prevented for next message size calculation. For unsigned integer the addition overflow has occurred when the result is smaller than one of the arguments. To simplify the fix, the types of buf.size and buf_idx are set to the same width, namely size_t also to be aligned with the type of length parameter in file read/write ops. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
HBM features list is ready while sending enumerate request and enumerating clients, output it to debugfs in these states too. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
In case of many active host clients clients (41 and more) 1K buffer is not enough for full information print. Calculate buffer size according to real clients number. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Use tracing events also for reading and writing pci configuration space <debugfs>/tracing/events/mei/mei_pci_reg_{read,write} Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 2月, 2016 6 次提交
-
-
由 Tomas Winkler 提交于
The iAMT WD client has to be whitelisted sice it has two connections and is filtered out by number_of_connections fixup. Also the API has changed for BDW and SKL but firmware haven't updated the protocol version. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Instead of integrating the iAMT watchdog in the mei core driver we will create a watchdog device on the mei client bus and create a driver for it. This patch removes the watchdog code from the mei core driver. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
We left few function prototypes in the header file after moving nfc logic to bus. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Copy completed callback content to the user space if we have such callback ready in the beginning of the read. Simplify offset processing logic as byproduct. This is a refinement for: commit 139aacf7 ("mei: fix read after read scenario") Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The MEI FW can receive only one flow control for read. Currently the driver only checks if a flow control credit was already sent and read is pending in the rd_pending queue, but it also has to check if flow control credit already queued in the write control queue to prevent sending more than one flow control credits. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Remove uuid from the debug messages in bus-fixup.c as this is already part of the device name. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 1月, 2016 1 次提交
-
-
由 Randy Dunlap 提交于
Fix build when CONFIG_SERIAL_8250=m and CONFIG_IBM_ASM=y. Fixes these build errors: drivers/built-in.o: In function `ibmasm_remove_one': module.c:(.text+0xf6874): undefined reference to `ibmasm_unregister_uart' drivers/built-in.o: In function `ibmasm_init_one': module.c:(.text+0xf6c37): undefined reference to `ibmasm_register_uart' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Max Asbock <masbock@us.ibm.com> Cc: Vernon Mauery <vernux@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 1月, 2016 1 次提交
-
-
由 Stefan Hajnoczi 提交于
checkpatch.pl wants arrays of strings declared as follows: static const char * const names[] = { "vq-1", "vq-2", "vq-3" }; Currently the find_vqs() function takes a const char *names[] argument so passing checkpatch.pl's const char * const names[] results in a compiler error due to losing the second const. This patch adjusts the find_vqs() prototype and updates all virtio transports. This makes it possible for virtio_balloon.c, virtio_input.c, virtgpu_kms.c, and virtio_rpmsg_bus.c to use the checkpatch.pl-friendly type. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
-
- 11 1月, 2016 3 次提交
-
-
由 Uma Krishnan 提交于
Add support for future IBM Coherent Accelerator (CXL) device with ID of 0x0601. Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com> Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Brian Norris 提交于
Some developers really like to have -Werror enabled for their code, as it helps to ensure warning free code. Others don't want -Werror, as it (for example) can cause problems when newer (or older) compilers have different sets of warnings, or new warnings can appear just when turning up the warning level (e.g., make W=1 or W=2). Thus, it seems prudent to have the use of -Werror be configurable. It so happens that cxl is only built on PowerPC, and PowerPC already has a nice set of Kconfig options for this, under CONFIG_PPC_WERROR. So let's use that, and the world is a happy place again! (Note that PPC_WERROR defaults to =y, so the common case compile should still be enforcing -Werror.) Fixes: d3d73f4b ("cxl: Compile with -Werror") Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Brian Norris 提交于
GCC 4.6.3 does not support -Wno-unused-const-variable. Instead, use the kbuild infrastructure that checks if this options exists. Fixes: 2cd55c68 ("cxl: Fix build failure due to -Wunused-variable behaviour change") Suggested-by: NMichal Marek <mmarek@suse.com> Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 08 1月, 2016 2 次提交
-
-
由 Tomas Winkler 提交于
fasync should return a negative value on error and not poll mask POLLERR. Cc: <stable@vger.kernel.org> # 4.3+ Cc: Al Viro <viro@ZenIV.linux.org.uk> Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomeu Vizoso 提交于
Adds a function that sets the pointer to dev_pm_domain in struct device and that warns if the device has already finished probing. The reason why we want to enforce that is because in the general case that can cause problems and also that we can simplify code quite a bit if we can always assume that. This patch also changes all current code that directly sets the dev.pm_domain pointer. Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 05 1月, 2016 1 次提交
-
-
由 Vaibhav Jain 提交于
Presently when a user-space process issues CXL_IOCTL_START_WORK ioctl we store the pid of the current task_struct and use it to get pointer to the mm_struct of the process, while processing page or segment faults from the capi card. However this causes issues when the thread that had originally issued the start-work ioctl exits in which case the stored pid is no more valid and the cxl driver is unable to handle faults as the mm_struct corresponding to process is no more accessible. This patch fixes this issue by using the mm_struct of the next alive task in the thread group. This is done by iterating over all the tasks in the thread group starting from thread group leader and calling get_task_mm on each one of them. When a valid mm_struct is obtained the pid of the associated task is stored in the context replacing the exiting one for handling future faults. The patch introduces a new function named get_mem_context that checks if the current task pointed to by ctx->pid is dead? If yes it performs the steps described above. Also a new variable cxl_context.glpid is introduced which stores the pid of the thread group leader associated with the context owning task. Reported-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Reported-by: NFrank Haverkamp <HAVERKAM@de.ibm.com> Suggested-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 08 12月, 2015 1 次提交
-
-
由 Frederic Barrat 提交于
A process element (defined in CAIA) keeps track of the endianess of contexts through the Little Endian (LE) bit of the State Register. It is currently set for user contexts, but was somehow forgotten for kernel contexts, so this patch fixes it. It could lead to erratic behavior from an AFU when the context is attached through the kernel API. Fixes: 2f663527 ("cxl: Configure PSL for kernel contexts and merge code") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Suggested-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 11月, 2015 1 次提交
-
-
由 Michal Marek 提交于
This allows to write drm-$(CONFIG_AGP) += drm_agpsupport.o without having to handle CONFIG_AGP=y vs. CONFIG_AGP=m. Only support this syntax for modules, since built-in code depending on something modular cannot work and init/Makefile actually relies on the current semantics. There are a few drivers which adapted to the current semantics out of necessity; these are fixed to also work when the respective subsystem is modular. Acked-by: Peter Chen <peter.chen@freescale.com> [chipidea] Signed-off-by: NMichal Marek <mmarek@suse.com>
-
- 24 11月, 2015 2 次提交
-
-
由 Andrew Donnellan 提交于
When writing a value to config space, cxl_pcie_write_config() calls cxl_pcie_config_info() to obtain a mask and shift value, shifts the new value accordingly, then uses the mask to combine the shifted value with the existing value at the address as part of a read-modify-write pattern. Currently, we use a logical OR operator rather than a bitwise OR operator, which means any use of this function results in an incorrect value being written. Replace the logical OR operator with a bitwise OR operator so the value is written correctly. Reported-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: stable@vger.kernel.org Fixes: 6f7f0b3d ("cxl: Add AFU virtual PHB and kernel API") Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Vaibhav Jain 提交于
An idr warning is reported when a context is release after the capi card is unbound from the cxl driver via sysfs. Below are the steps to reproduce: 1. Create multiple afu contexts in an user-space application using libcxl. 2. Unbind capi card from cxl using command of form echo <capi-card-pci-addr> > /sys/bus/pci/drivers/cxl-pci/unbind 3. Exit/kill the application owning afu contexts. After above steps a warning message is usually seen in the kernel logs of the form "idr_remove called for id=<context-id> which is not allocated." This is caused by the function cxl_release_afu which destroys the contexts_idr table. So when a context is release no entry for context pe is found in the contexts_idr table and idr code prints this warning. This patch fixes this issue by increasing & decreasing the ref-count on the afu device when a context is initialized or when its freed respectively. This prevents the afu from being released until all the afu contexts have been released. The patch introduces two new functions namely cxl_afu_get/put that manage the ref-count on the afu device. Also the patch removes code inside cxl_dev_context_init that increases ref on the afu device as its guaranteed to be alive during this function. Reported-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 07 11月, 2015 1 次提交
-
-
由 Mel Gorman 提交于
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMel Gorman <mgorman@techsingularity.net> Acked-by: NMichal Hocko <mhocko@suse.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 10月, 2015 3 次提交
-
-
由 Stephen Smalley 提交于
Add a copy_to_user() call to the ACCESS_USERSPACE test prior to attempting direct dereferencing of the user address to ensure the page is present. Otherwise, a fault occurs on arm kernels even prior to the introduction of CONFIG_CPU_SW_DOMAIN_PAN, and there is no difference in behavior for CONFIG_CPU_SW_DOMAIN_PAN=n vs CONFIG_CPU_SW_DOMAIN_PAN=y. Before this change, for any value of CONFIG_CPU_SW_DOMAIN_PAN: lkdtm: Performing direct entry ACCESS_USERSPACE lkdtm: attempting bad read at b6fe8000 Unable to handle kernel paging request at virtual address b6fe8000 After this change, for CONFIG_CPU_SW_DOMAIN_PAN=n: lkdtm: Performing direct entry ACCESS_USERSPACE lkdtm: attempting bad read at b6efc000 lkdtm: attempting bad write at b6efc000 After this change, for CONFIG_CPU_SW_DOMAIN_PAN=y: lkdtm: Performing direct entry ACCESS_USERSPACE lkdtm: attempting bad read at b6f7d000 Unhandled fault: page domain fault (0x01b) at 0xb6f7d000 ... Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
The mei bus fixup use dev_xxx services for printing to kernel log so we need to setup the device name prior to running fixup hooks. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
The correct lock order is cl_bus_lock device_lock me_clients_rwsem This order was violated in bus rescan and remove routines when me_client_rwsem was locked before cl_bus_lock. Chain exists of: [ 4.321653] &dev->device_lock --> &dev->me_clients_rwsem --> &dev->cl_bus_lock [ 4.321653] [ 4.321679] Possible unsafe locking scenario: [ 4.321679] [ 4.321693] CPU0 CPU1 [ 4.321701] ---- ---- [ 4.321709] lock(&dev->cl_bus_lock); [ 4.321720] lock(&dev->me_clients_rwsem); [ 4.321733] lock(&dev->cl_bus_lock); [ 4.321745] lock(&dev->device_lock); [ 4.321755] [ 4.321755] *** DEADLOCK *** [ 4.321755] Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-