- 23 9月, 2015 1 次提交
-
-
由 Namhyung Kim 提交于
When perf creates a new child to profile, the events are enabled on exec(). And in this case, it doesn't synthesize any event for the child since they'll be generated during exec(). But there's an window between the enabling and the event generation. It used to be overcome since samples are only in kernel (so we always have the map) and the comm is overridden by a later COMM event. However it won't work if events are processed and displayed before the COMM event overrides like in 'perf script'. This leads to those early samples (like native_write_msr_safe) not having a comm but pid (like ':15328'). So it needs to synthesize COMM event for the child explicitly before enabling so that it can have a correct comm. But at this time, the comm will be "perf" since it's not exec-ed yet. Committer note: Before this patch: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task-events :4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429 usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4. usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so) usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429) After: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446 perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446 usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1 usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so) usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446) # Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 22 9月, 2015 1 次提交
-
-
由 Wang Nan 提交于
Don't blindly retrieve and use a last element in the lists returned by parse_events__scanner(), as it may have collected no entries, i.e. return an empty list. Signed-off-by: NWang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441523623-152703-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 9月, 2015 2 次提交
-
-
由 Peter Senna Tschudin 提交于
Returning a negative value for a boolean function seem to have the undesired effect of returning true. Replace -1 by false in a bool-returning function. The diff of the .s file before and after the change (for x86_64): 3907c3907 < movl $1, %ebx --- > xorl %ebx, %ebx while if -1 is replaced by true, the diff is empty. This issue was found by the following Coccinelle semantic patch: <smpl> @@ identifier f; constant C; typedef bool; @@ bool f (...){ <+... * return -C; ...+> } </smpl> Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Milos Vyletel <milos@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1442484533-19742-1-git-send-email-peter.senna@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
This reverts commit f785f235. We have a test to check if elf_getphdrnum() is present, so, if it fails, we'll get: [acme@rhel5 linux]$ cat /tmp/build/perf/feature/test-libelf-getphdrnum.make.output cc1: warnings being treated as errors test-libelf-getphdrnum.c: In function ‘main’: test-libelf-getphdrnum.c:7: warning: implicit declaration of function ‘elf_getphdrnum’ [acme@rhel5 linux]$ And this block will not be compiled: #ifndef HAVE_ELF_GETPHDRNUM_SUPPORT static int elf_getphdrnum(Elf *elf, size_t *dst) ... #endif So, if elf_getphdrnum() is being defined somewhere, there is a problem with the test that is not detecting that function, go fix it. Reported-by: NVinson Lee <vlee@twopensource.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qn459fal6acvcvm50i8zxx9k@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 9月, 2015 1 次提交
-
-
由 Stephane Eranian 提交于
Per-pkg events need to be captured once per processor socket. The code in check_per_pkg() ensures only one value per processor package is used. However there is a problem with this function in case the first CPU of the package does not measure anything for the per-pkg event, but other CPUs do. Consider the following: $ create cgroup FOO; echo $$ >FOO/tasks; taskset -c 1 noploop & $ perf stat -a -I 1000 -e intel_cqm/llc_occupancy/ -G FOO sleep 100 1.00000 <not counted> Bytes intel_cqm/llc_occupancy/ FOO The reason for this is that CPU0 in the cgroup has nothing running on it. Yet check_per_plg() will mark socket0 as processed and no other event value will be considered for the socket. This patch fixes the problem by having check_per_pkg() only consider events which actually ran. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1441286620-10117-1-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 9月, 2015 19 次提交
-
-
由 Adrian Hunter 提交于
Fix it by making it call perf_evlist__set_maps() instead of setting the maps itself. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-13-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
If evsels are added after maps are created, then they won't have any maps propagated to them. Fix that. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-12-git-send-email-adrian.hunter@intel.com [ Moved the moving of propagate_maps() to the patch before, so that this one does _just_ the one lile fix calling in add()] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Subsequent fixes will need a function that just propagates maps for a single evsel so factor it out. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-11-git-send-email-adrian.hunter@intel.com [ Moved them to before perf_evlist__add() to avoid having to move it in the next patch ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Since there is a function to set maps, perf_evlist__create_maps() should use it. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-10-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Make perf_evlist__set_maps() more resilient by allowing for the possibility that one or another of the maps isn't being changed and therefore should not be "put". Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-9-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
perf_evlist__propagate_maps() cannot easily tell if an evsel has its own cpu map. To make that simpler, keep a copy of the PMU cpu map and adjust the propagation logic accordingly. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
perf_evlist__propagate_maps() incorrectly assumes evsel->threads is NULL before reassigning it, but it won't be NULL when perf_evlist__set_maps() is used to set different (or NULL) maps. Thus thread_map__put must be used, which works even if evsel->threads is NULL. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Commit d49e4695 ("perf evsel: Add a backpointer to the evlist a evsel is in") updated perf_evlist__add() but not perf_evlist__splice_list_tail(). This illustrates that it is better if perf_evlist__splice_list_tail() calls perf_evlist__add() instead of duplicating the logic, so do that. This will also simplify a subsequent fix for propagating maps. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Subsequent patches will need to call perf_evlist__propagate_maps without reference to a "target". Add evlist->has_user_cpus to record whether the user has specified which cpus to target (and therefore whether that list of cpus should override the default settings for a selected event i.e. the cpu maps should be propagated) Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The validation checks that the values that were just assigned, got assigned i.e. the error can't ever happen. Subsequent patches will call this code in places where errors are not being returned. Changing those code paths to return this non-existent error is counter-productive, so just remove it. That in turn results in perf_evlist__set_maps not needing to return an error, but callers aren't checking it either, so remove that too. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Don't need to check for NULL when "putting" evlist->maps and evlist->threads because the "put" functions already do that. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
If evsel->cpus is to be reassigned then the current value must be "put", which works even if it is NULL. Simplify the current logic by moving the "put" next to the assignment. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Wang Nan 提交于
regs_query_register_offset() is a helper function which converts register name like "%rax" to offset of a register in 'struct pt_regs', which is required by BPF prologue generator. PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET indicates an architecture supports converting name of a register to its offset in 'struct pt_regs'. HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced as the corresponding CFLAGS of PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET. Signed-off-by: NWang Nan <wangnan0@huawei.com> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441523623-152703-19-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com> [ Extracted from eBPF patches ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Enhancing parsing events tracepoint error output. Adding more verbose output when the tracepoint is not found or the tracing event path cannot be access. $ sudo perf record -e sched:sched_krava ls event syntax error: 'sched:sched_krava' \___ unknown tracepoint Error: File /sys/kernel/debug/tracing//tracing/events/sched/sched_krava not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events ... $ perf record -e sched:sched_krava ls event syntax error: 'sched:sched_krava' \___ can't access trace events Error: No permissions to read /sys/kernel/debug/tracing//tracing/events/sched/sched_krava Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug' Run 'perf list' for a list of valid events ... Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1441615087-13886-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Propagate error info from tp_format via ERR_PTR to get it all the way down to the parse-event.c tracepoint adding routines. Following functions now return pointer with encoded error: - tp_format - trace_event__tp_format - perf_evsel__newtp_idx - perf_evsel__newtp This affects several other places in perf, that cannot use pointer check anymore, but must utilize the err.h interface, when getting error information from above functions list. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Link: http://lkml.kernel.org/r/1441615087-13886-5-git-send-email-jolsa@kernel.org [ Add two missing ERR_PTR() and one IS_ERR() ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Pass 'struct parse_events_error *error' to the parse-event.c tracepoint adding path. It will be filled with error data in following patches. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Reviewed-by: NRaphael Beamonte <raphael.beamonte@gmail.com> Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1441615087-13886-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The init/exit_symbols_maps() functions are to setup and cleanup necessary info for probe events. But they need to be called from out of the probe code now, so this patch exports them. However the names are too generic, so change them to have 'probe'. :) Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441852026-28974-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The cleanup_perf_probe_events() frees all resources related to a perf probe event. However it only freed resources in trace probe events, not perf probe events. So call clear_perf_probe_event() too. Reported-by: NWang Nan <wangnan0@huawei.com> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1441852026-28974-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
Currently, users can zoom in/out for threads and dso in 'perf top' and 'perf report'. This patch extends it for the processor sockets. 'S' is the short key to zoom into current Processor Socket. Signed-off-by: NKan Liang <kan.liang@intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1441377946-44429-4-git-send-email-kan.liang@intel.com [ - Made it elide the Socket column when zooming into it, just like with the other zoom ops; - Make it use browser->pstack, to unzoom level by level; - Rename 'socket' variables to 'socket_id' to make it build on older systems where it shadows a global glibc declaration ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 9月, 2015 13 次提交
-
-
由 Kan Liang 提交于
Introduce --socket-filter option for 'perf report' to only show entries for a processor socket that match this filter. $ perf report --socket-filter 1 --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 752 of event 'cycles' # Event count (approx.): 350995599 # Processor Socket: 1 # # Overhead Command Shared Object Symbol # ........ ......... ................ ................................. # 97.02% test test [.] plusB_c 0.97% test test [.] plusA_c 0.23% swapper [kernel.vmlinux] [k] acpi_idle_do_entry 0.09% rcu_sched [kernel.vmlinux] [k] dyntick_save_progress_counter 0.01% swapper [kernel.vmlinux] [k] task_waking_fair 0.00% swapper [kernel.vmlinux] [k] run_timer_softirq Signed-off-by: NKan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1441377946-44429-3-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
This patch enable perf report to sort by processor socket: $ perf report --stdio --sort socket,comm,dso,symbol # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 686 of event 'cycles' # Event count (approx.): 349215462 # # Overhead SOCKET Command Shared Object Symbol # ........ ...... ....... ................ ............................ # 97.05% 000 test test [.] plusB_c 0.98% 000 test test [.] plusA_c 0.93% 001 perf [kernel.vmlinux] [k] smp_call_function_single 0.19% 001 perf [kernel.vmlinux] [k] page_fault 0.19% 001 swapper [kernel.vmlinux] [k] pm_qos_request 0.16% 000 test [kernel.vmlinux] [k] add_mm_counter_fast Signed-off-by: NKan Liang <kan.liang@intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1441377946-44429-2-git-send-email-kan.liang@intel.com [ Fix col calc, un-allcapsify col header & read the topology when not using perf.data ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
This information will come from perf.data files of from the current system, cached when needed, such as when the 'socket' sort order gets introduced. Signed-off-by: NKan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441377946-44429-1-git-send-email-kan.liang@intel.com [ Don't blindly use env->cpu[al.cpu].socket_id & use machine->env, fixes by Jiri & Arnaldo ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The 'struct machine' represents the machine where the samples were/are being collected, and we also have a 'struct perf_env' with extra details about such machine, that we were collecting at 'perf.data' creation time but we also needed when no perf.data file is being used, such as in 'perf top'. So, get those structs closer together, as they provide a bigger picture of the sample's environment. In 'perf session', when the file argument is NULL, we can assume that the tool is sampling the running machine, so point machine->env to the global put in place in previous patches, while set it to the perf_header.env one when reading from a file. This paves the way for machine->env to be used in perf_event__preprocess_sample to populate addr_location.socket. Tested-by: NWang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2ajotl0khscutm68exictoy9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Out of the code to write the cpu topology map in the perf.data file header. Now if one needs the CPU topology map for the running machine, one needs to call perf_env__read_cpu_topology_map(perf_env) and the info will be stored in perf_env.cpu. For now we're using a global perf_env variable, that will have its contents freed after we run a builtin. v2: Check perf_env__read_cpu_topology_map() return in write_cpu_topology() (Kan Liang) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441828225-667-5-git-send-email-acme@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
We have the tools/lib/ sysfs__read_int() for that, avoid code duplication. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-fqg6vt5ku72pbf54ljg6tmoy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
Get msr pmu type when processing pmu_mappings Signed-off-by: NKan Liang <kan.liang@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/n/tip-3ngei63gepydwxhvytl2wx89@git.kernel.org [ Fixed it up wrt moving perf_env from header.h ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
We have no use for it in evsel.h. Tested-by: NWang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-um03yjrgyi3bj1hzqiqs4dsu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Since we were not setting it to at least 3 chars ('CPU'), it was being reset to zero when recalculating the columns width when refreshing the screen, in 'perf top'. Fix it. Tested-by: NWang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-iqcdnkkqm6sew06x01fbijmy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Move this from two globals to perf_env global, that eventually will be just perf_header->env or something else, to ease the refactoring series, leave it as a global and go on reading more of its fields, not as part of the header writing process but as a perf_env init one that will be used for perf.data-less situations. Tested-by: NWang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2j78tdf8zn1ci0y6ji15bifj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Since it can be used separately from 'perf_session' and 'perf_header', move it to separate include file and object, next csets will try to move a perf_env__init() routine. Tested-by: NWang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ff2rw99tsn670y1b6gxbwdsi@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Using tracing_path interface on several places, that more or less copy the functionality of tracing_path interface. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1441180605-24737-16-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Switching to the fs.c related filesystem framework. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1441180605-24737-14-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 13 9月, 2015 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The original patch introducing this header wrote the number of CPUs available and online in one order and then swapped those values when reading, fix it. Before: # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 # echo 0 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 3 # echo 0 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 2 After the fix, bringing back the CPUs online: # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 2 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 3 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: fbe96f29 ("perf tools: Make perf.data more self-descriptive (v8)") Link: http://lkml.kernel.org/r/20150911153323.GP23511@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 04 9月, 2015 2 次提交
-
-
由 Namhyung Kim 提交于
Showing actual trace event when deleteing perf events is only needed in perf probe command. But the add functionality itself can be used by other places. So move the printing code into the cmd_probe(). The output is not changed. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441368963-11565-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The del_perf_probe_events() does 2 things: 1. find existing events which match to filter 2. delete such trace events from kernel But sometimes we need to do something with the trace events. So split the funtion into two, so that it can access intermediate trace events name using strlist if needed. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441368963-11565-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-