This function call isn't needed here; the same function is already
called by i40e_reset_vf.

Change-ID: I96ccbf91b752965c9e28fe895d4c7d4c46e3ba44
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Changes the parsing of CEE App TLVs to fill in the App selector in struct
i40e_dcbx_config with the IEEE App selector so the caller doesn't have to
consider whether the App came from a CEE or IEEE DCBX negotiation.

Change-ID: Ia7d9d664cde04d2ebcc9822fd22e4929c6edab3a
Signed-off-by: NGreg Bowers <gregory.j.bowers@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a member to the nvm_info struct for oem_ver info to be
output either by OID or ethtool.

Change-ID: I1e5d513ae67622e2af17042924fdb4b5d6d85366
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The driver was not correctly handling calls to its ndo_set_mac_address
method. It did not properly check to see if the override would be
allowed by the PF driver, and never removed the old address from its
filter list.

Add a new flag to the adapter struct which is set if the MAC address is
assigned by the PF. Check this flag and don't allow the MAC address to
be changed if it is set. Search for and properly remove the filter
for the old MAC address when the new one is set.

Change-ID: I817bf620c869c5a80e6a7eab65c9cbad1dc89799
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Replace one left over (1 << up) in the i40e_dcb.c file with the BIT()
macro.

Change-ID: I39492a400a2cee5ac566143a5b436cc478bea0db
Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Flag the filter_mask parameter as __always_unused in the
ndo_bridge_getlink function.

Change-ID: Ifc1e99c7fb84bcbf81cf7b0ac891ad8ca956ffb2
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the new Port link status bit and rename the link status to function
link status.

Change-ID: I71289327ae62638ce967b6ad40114caf998b6dab
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add ip commands with examples for creating VRF devics, enslaving interfaces
and dumping VRF-focused data (address, neighbors, routes).
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use kstrdup instead of strlen-kmalloc-strcpy. Remove unneeded NULL
test, it will be tested inside kstrdup. Remove 0 length string test,
it has been tested in the caller of dsp_pipeline_build.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a TCP/DCCP listener is closed, its pending SYN_RECV request sockets
become stale, meaning 3WHS can not complete.

But current behavior is wrong :
incoming packets finding such stale sockets are dropped.

We need instead to cleanup the request socket and perform another
lookup :
- Incoming ACK will give a RST answer,
- SYN rtx might find another listener if available.
- We expedite cleanup of request sockets and old listener socket.

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
bridge: vlan: cleanups & fixes (part 3)

Patch 01 converts the vlgrp member to use rcu as it was already used in a
similar way so better to make it official and use all the available RCU
instrumentation. Patch 02 fixes a bug where the vlan_list can be traversed
without rtnl or rcu held which could lead to using freed entries.
Patch 03 removes some redundant code that isn't needed anymore.
Patch 04 fixes a bug reported by Ido Schimmel about the vlan_flush order
and switchdevs, it moves it back.

v2: patch 03 and 04 are new, couldn't escape the second synchronize_rcu()
since the rhtable destruction can sleep
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel reported a problem with switchdev devices because of the
order change of del_nbp operations, more specifically the move of
nbp_vlan_flush() which deletes all vlans and frees vlgrp after the
rx_handler has been unregistered. So in order to fix this move
vlan_flush back where it was and make it destroy the rhtable after
NULLing vlgrp and waiting a grace period to make sure noone can see it.
Reported-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Ido Schimmel pointed out the vlan_vid_del() code in nbp_vlan_flush is
unnecessary (and is actually a remnant of the old vlan code) so we can
remove it.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

br_fill_ifinfo is called by br_ifinfo_notify which can be called from
many contexts with different locks held, sometimes it relies upon
bridge's spinlock only which is a problem for the vlan code, so use
explicitly rcu for that to avoid problems.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bridge and port's vlgrp member is already used in RCU way, currently
we rely on the fact that it cannot disappear while the port exists but
that is error-prone and we might miss places with improper locking
(either RCU or RTNL must be held to walk the vlan_list). So make it
official and use RCU for vlgrp to catch offenders. Introduce proper vlgrp
accessors and use them consistently throughout the code.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: VRF support in IPv6 stack

Initial support for VRF in IPv6 stack. Makes IPv6 functionality on par
with IPv4 -- ping, tcp client/server and udp client/server all work fine.
tcpdump on vrf device and external tap (e.g., host side tap device) shows
all packets with proper addresses. IPv6 does not need the source address
operation like IPv4. Verified vti6 works properly in my setup as does use
of an IPv6 address on the VRF device.

v3
- re-based to top of net-next (updates per net namespace changes by Eric)
- fixed dst_entry typecasts as requested by Dave
- added flags to inet6_rtm_getroute (IPv6 version of deaa0a6a)

v2
- fixed CONFIG_IPV6 dependency as questioned by Cong
  - if IPV6 is a module, kbuild ensures VRF is a module
  - if IPV6 is disabled IPV6 functionality is compiled out of VRF module
- addressed comments from Nik over IRC
  - removed duplicate call to netif_is_l3_master in l3mdev_rt6_dst_by_oif
  - changed allocation flag from GFP_ATOMIC to GFP_KERNEL since it is init time
  - added free of rt6i_pcpu
  - check_ipv6_frame returns false only if packet is NDISC type
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As with IPv4 support for VRFs added to IPv6 stack by replacing hardcoded
table ids with possibly device specific ones and manipulating the oif in
the flowi6. The flow flags are used to skip oif compare in nexthop lookups
if the device is enslaved to a VRF via the L3 master device.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for IPv6 to VRF device driver. Implemenation parallels what
has been done for IPv4.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add operations to retrieve cached IPv6 dst entry from l3mdev device
and lookup IPv6 source address.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit c62987bb ("bridge: push bridge setting ageing_time down to
switchdev") introduced a timer race condition because the gc_timer can
get rearmed after it's supposedly stopped and flushed in br_dev_delete()
leading to a use of freed memory. So take rtnl to sync with bridge
destruction when setting ageing_timer.
Here's the trace reproduced with these two commands running in parallel:
while :; do echo 10000 > /sys/class/net/br0/bridge/ageing_timer; done;
while :; do brctl addbr br0; ip l set br0 up; ip l set br0 down;
brctl delbr br0; done;

[  300.000029] BUG: unable to handle kernel paging request at
ffffffff811c59d3
[  300.000263] IP: [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0
[  300.000422] PGD 1a0f067 PUD 1a10063 PMD 10001e1
[  300.000639] Oops: 0003 [#1] SMP
[  300.000793] Modules linked in: bridge stp llc nfsd auth_rpcgss
oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul
crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev aesni_intel
aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd
snd_hda_codec_generic qxl drm_kms_helper psmouse pcspkr ttm
snd_hda_intel 9pnet_virtio evdev serio_raw joydev snd_hda_codec 9pnet
virtio_balloon drm snd_hwdep virtio_console snd_hda_core pvpanic snd_pcm
i2c_piix4 snd_timer acpi_cpufreq parport_pc snd parport soundcore button
processor i2c_core ipv6 autofs4 hid_generic usbhid hid ext4 crc16
mbcache jbd2 sg sr_mod cdrom ata_generic virtio_blk virtio_net e1000
ehci_pci uhci_hcd ehci_hcd usbcore usb_common floppy ata_piix libata
virtio_pci virtio_ring virtio scsi_mod
[  300.004008] CPU: 1 PID: 1169 Comm: bash Not tainted 4.3.0-rc3+ #46
[  300.004008] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  300.004008] task: ffff880035be2200 ti: ffff88003795c000 task.ti:
ffff88003795c000
[  300.004008] RIP: 0010:[<ffffffff810f168e>]  [<ffffffff810f168e>]
__internal_add_timer+0x2e/0xd0
[  300.004008] RSP: 0018:ffff88003fd03e78  EFLAGS: 00010046
[  300.004008] RAX: ffff88003fd0ef60 RBX: 840fc78949c08548 RCX:
00000001ffffffff
[  300.004008] RDX: 0000000000000000 RSI: ffffffff811c59d3 RDI:
ffff88003fd0df00
[  300.004008] RBP: ffff88003fd03e78 R08: 00000000ffffffff R09:
0000000000000000
[  300.004008] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff88003fd0df00
[  300.004008] R13: 0000000000000000 R14: 0000000000000001 R15:
ffffffff816032e0
[  300.004008] FS:  00007fcbdd609700(0000) GS:ffff88003fd00000(0000)
knlGS:0000000000000000
[  300.004008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.004008] CR2: ffffffff811c59d3 CR3: 0000000037879000 CR4:
00000000000406e0
[  300.004008] Stack:
[  300.004008]  ffff88003fd03ea8 ffffffff810f1775 ffff88003c8cb958
ffff88003fd0df00
[  300.004008]  0000000000000000 0000000000000001 ffff88003fd03f18
ffffffff810f28c4
[  300.004008]  ffff88003fd0eb68 ffff88003fd0e968 ffff88003fd0e768
ffff88003fd0df68
[  300.004008] Call Trace:
[  300.004008]  <IRQ>
[  300.004008]  [<ffffffff810f1775>] cascade+0x45/0x70
[  300.004008]  [<ffffffff810f28c4>] run_timer_softirq+0x2f4/0x340
[  300.004008]  [<ffffffff8107e380>] __do_softirq+0xd0/0x440
[  300.004008]  [<ffffffff8107e8a3>] irq_exit+0xb3/0xc0
[  300.004008]  [<ffffffff815c2032>] smp_apic_timer_interrupt+0x42/0x50
[  300.004008]  [<ffffffff815bfe37>] apic_timer_interrupt+0x87/0x90
[  300.004008]  <EOI>
[  300.004008]  [<ffffffff811fb80c>] ? create_object+0x13c/0x2e0
[  300.004008]  [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70
[  300.004008]  [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70
[  300.004008]  [<ffffffff8101e17f>] print_context_stack+0x7f/0xf0
[  300.004008]  [<ffffffff8101d55b>] dump_trace+0x11b/0x300
[  300.004008]  [<ffffffff8102970b>] save_stack_trace+0x2b/0x50
[  300.004008]  [<ffffffff811fb80c>] create_object+0x13c/0x2e0
[  300.004008]  [<ffffffff815b2e8e>] kmemleak_alloc+0x4e/0xb0
[  300.004008]  [<ffffffff811e475d>] kmem_cache_alloc_trace+0x18d/0x2f0
[  300.004008]  [<ffffffff8128b139>] kernfs_fop_open+0xc9/0x380
[  300.004008]  [<ffffffff8120214f>] do_dentry_open+0x1ff/0x2f0
[  300.004008]  [<ffffffff8128b070>] ? kernfs_fop_release+0x70/0x70
[  300.004008]  [<ffffffff812034f9>] vfs_open+0x59/0x60
[  300.004008]  [<ffffffff812130de>] path_openat+0x1ce/0x1260
[  300.004008]  [<ffffffff812154ae>] do_filp_open+0x7e/0xe0
[  300.004008]  [<ffffffff812251ff>] ? __alloc_fd+0xaf/0x180
[  300.004008]  [<ffffffff8120387b>] do_sys_open+0x12b/0x210
[  300.004008]  [<ffffffff8120397e>] SyS_open+0x1e/0x20
[  300.004008]  [<ffffffff815bf0b6>] entry_SYSCALL_64_fastpath+0x16/0x7a
[  300.004008] Code: 66 90 48 8b 46 10 48 8b 4f 40 55 48 89 c2 48 89 e5
48 29 ca 48 81 fa ff 00 00 00 77 20 0f b6 c0 48 8d 44 c7 68 48 8b 10 48
85 d2 <48> 89 16 74 04 48 89 72 08 48 89 30 48 89 46 08 5d c3 48 81 fa
[  300.004008] RIP  [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0
[  300.004008]  RSP <ffff88003fd03e78>
[  300.004008] CR2: ffffffff811c59d3

Fixes: c62987bb ("bridge: push bridge setting ageing_time down to switchdev")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We shouldn't allow BRIDGE_VLAN_INFO_PVID flag in VLAN ranges.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: NElad Raz <eladr@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: mv88e6xxx: fix hardware bridging

DSA and its drivers currently hook the NETDEV_CHANGEUPPER net_device event in
order to configure the VLAN map of every port.

This VLAN map is a feature of these switch chips to hardcode and restrict which
output ports a given input port can egress frames to.

A Linux bridge is a simple untagged VLAN propagated by the bridge code itself.
With a proper 802.1Q support, a driver does not need this hook anymore, and
will simply program the related VLAN object.

This patchset improves the hardware bridging code in the mv88e6xxx driver with
a strict 802.1Q mode.

Ideally, the equivalent must be done for Broadcom Starfighter 2 and Rocker,
before completely getting rid of this hook.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Playing with the VLAN map of every port to implement "hardware bridging"
in the 88E6352 driver was a hack until full 802.1Q was supported.

Indeed with 802.1Q port mode "Disabled" or "Fallback", this feature is
used to restrict which output ports an input port can egress frames to.

A Linux bridge is an untagged VLAN. With full 802.1Q support, we don't
need this hack anymore and can use the "Secure" strict 802.1Q port mode.

With this mode, the port-based VLAN map still needs to be configured,
but all the logic is VTU-centric. This means that the switch only cares
about rules described in its hardware VLAN table, which is exactly what
Linux bridge expects and what we want.

Note also that the hardware bridging was broken with the previous
flexible "Fallback" 802.1Q port mode. Here's an example:

Port0 and Port1 belong to the same bridge. If Port0 sends crafted tagged
frames with VID 200 to Port1, Port1 receives it. Even if Port1 is in
hardware VLAN 200, but not Port0, Port1 will still receive it, because
Fallback mode doesn't care about invalid VID or non-member source port.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A DSA driver may not provide the port_join_bridge and port_leave_bridge
functions, so don't warn in such case.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we configure a switch chip through a Linux bridge, and a bridge is
implemented as a VLAN, there is no need for per-port FID anymore.

This patch gets rid of this and simplifies the driver code since we can
now directly map all 4095 FIDs available to all VLANs.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With 88E6352 and similar switch chips, each port has a map to restrict
which output port this input port can egress frames to.

The current driver code implements hardware bridging using this feature,
and assigns to a bridge group the FID of its first member.

Now that 802.1Q is fully implemented in this driver, a Linux bridge
which is a simple untagged VLAN, already gets its own FID.

This patch gets rid of the per-bridge FID and explicits the usage of the
port based VLAN map feature.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Consider the following "duelling syn" sequence between two peers A and B:
        	A		B
        	SYN1     -->
        	    	<--	SYN2
        	SYN2ACK  -->

Note that the SYN/ACK has already been sent out by TCP before
rds_tcp_accept_one() gets invoked as part of callbacks.

If the inet_addr(A) is numerically less than inet_addr(B),
the arbitration scheme in rds_tcp_accept_one() will prefer the
TCP connection triggered by SYN1, and will send a CLOSE for the
SYN2 (just after the SYN2ACK was sent).

Since B also follows the same arbitration scheme, it will send the SYN-ACK
for SYN1 that will set up a healthy ESTABLISHED connection on both sides.
B will also get a  CLOSE for SYN2, which should result in the cleanup
of the TCP state machine for SYN2, but it should not trigger any
stale RDS-TCP callbacks (such as ->writespace, ->state_change etc),
that would disrupt the progress of the SYN2 based RDS-TCP  connection.

Thus the arbitration scheme in rds_tcp_accept_one() should restore
rds_tcp callbacks for the winner before setting them up for the
new accept socket, and also make sure that conn->c_outgoing
is set to 0 so that we do not trigger any reconnect attempts on the
passive side of the tcp socket in the future, in conformance with
commit c82ac7e6 ("net/rds: RDS-TCP: only initiate reconnect attempt
on outgoing TCP socket.")
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IP address passed to rds_bind() should be vetted by the
transport's ->laddr_check() for a previously bound transport.
This needs to be done to avoid cases where, for example,
the application has asked for an IB transport,
but the IP address passed to bind is only usable on
ethernet interfaces.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only instance of a qlcnic_mbx_ops structure is never modified.  Thus
the declaration of the structure and all references to the structure type
can be made const.

In the definition of the qlcnic_mailbox structure, the ops field is no
longer lined up with the other fields.  This was left as is, to avoid a lot
of trivial changes on the other lines.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently it's possible for someone to send a vlan range to the kernel
with the pvid flag set which will result in the pvid bouncing from a
vlan to vlan and isn't correct, it also introduces problems for hardware
where it doesn't make sense having more than 1 pvid. iproute2 already
enforces this, so let's enforce it on kernel-side as well.
Reported-by: NElad Raz <eladr@mellanox.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a smatch warning:
drivers/atm/iphase.c:1178 rx_pkt() warn: curly braces intended?

The code is correct, the indention is misleading. In case the allocation
of skb fails, we want to skip to the end.
Signed-off-by: NTillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Smatch complains about returning hard coded error codes, silence this
warning.

drivers/atm/iphase.c:115 ia_enque_rtn_q() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: NTillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes ip6_route_info_create return err pointer instead of
returning the rt pointer by reference as suggested  by Dave
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fix the building error reported by Jiri Pirko <jiri@resnulli.us>

drivers/net/ethernet/hisilicon/hns/hnae.h:465:2: error: unknown type
name 'phy_interface_t'
        phy_interface_t phy_if;
	^
the full build log is on https://lists.01.org/pipermail/kbuild-all.
Signed-off-by: Nhuangdaode <huangdaode@hisilicon.com>
Signed-off-by: Nyankejian <yankejian@huawei.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

timewait or request sockets are small and do not contain sk->sk_tsflags

Without this fix, we might read garbage, and crash later in

__skb_complete_tx_timestamp()
 -> sock_queue_err_skb()

(These pseudo sockets do not have an error queue either)

Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric W. Biederman says:

====================
net: Pass net into defragmentation

This is the next installment of my work to pass struct net through the
output path so the code does not need to guess how to figure out which
network namespace it is in, and ultimately routes can have output
devices in another network namespace.

In netfilter and af_packet we defragment packets in the output path,
and there is the usual amount of confusion about how to compute which
net we are processing the packets in.  This patchset clears that
confusion up by explicitly passing in struct net in ip_defrag,
ip_check_defrag, and nf_ct_frag6_gather.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function nf_ct_frag6_gather is called on both the input and the
output paths of the networking stack.  In particular ipv6_defrag which
calls nf_ct_frag6_gather is called from both the the PRE_ROUTING chain
on input and the LOCAL_OUT chain on output.

The addition of a net parameter makes it explicit which network
namespace the packets are being reassembled in, and removes the need
for nf_ct_frag6_gather to guess.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function ip_defrag is called on both the input and the output
paths of the networking stack.  In particular conntrack when it is
tracking outbound packets from the local machine calls ip_defrag.

So add a struct net parameter and stop making ip_defrag guess which
network namespace it needs to defragment packets in.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_call_ra_chain is called early in the forwarding chain from
ip_forward and ip_mr_input, which makes skb->dev the correct
expression to get the input network device and dev_net(skb->dev) a
correct expression for the network namespace the packet is being
processed in.

Compute the network namespace and store it in a variable to make the
code clearer.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>