The only user of the fpu_activate hook was dropped in commit
2d04a05b (KVM: x86 emulator: emulate CLTS internally, 2011-04-20).
vmx_fpu_activate and svm_fpu_activate are still called on #NM (and for
Intel CLTS), but never from common code; hence, there's no need for
a hook.
Reviewed-by: NYang Zhang <yang.z.zhang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit 682367c4,
which causes 32-bit SMP Windows 7 guests to panic.

SeaBIOS has a limit on the number of MTRRs that it can handle,
and this patch exceeded the limit.  Better revert it.
Thanks to Nadav Amit for debugging the cause.

Cc: stable@nongnu.org
Reported-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds support for loading a kexec on panic (kdump) kernel usning
new system call.

It prepares ELF headers for memory areas to be dumped and for saved cpu
registers.  Also prepares the memory map for second kernel and limits its
boot to reserved areas only.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is loader specific code which can load bzImage and set it up for
64bit entry.  This does not take care of 32bit entry or real mode entry.

32bit mode entry can be implemented if somebody needs it.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The core mm code will provide a default gate area based on
FIXADDR_USER_START and FIXADDR_USER_END if
!defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR).

This default is only useful for ia64.  arm64, ppc, s390, sh, tile, 64-bit
UML, and x86_32 have their own code just to disable it.  arm, 32-bit UML,
and x86_64 have gate areas, but they have their own implementations.

This gets rid of the default and moves the code into ia64.

This should save some code on architectures without a gate area: it's now
possible to inline the gate_area functions in the default case.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Acked-by: NNathan Lynch <nathan_lynch@mentor.com>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle]
Acked-by: Richard Weinberger <richard@nod.at> [for um]
Acked-by: Will Deacon <will.deacon@arm.com> [for arm64]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rather than have architectures #define ARCH_HAS_SG_CHAIN in an
architecture specific scatterlist.h, make it a proper Kconfig option and
use that instead.  At same time, remove the header files are are now
mostly useless and just include asm-generic/scatterlist.h.

[sfr@canb.auug.org.au: powerpc files now need asm/dma.h]
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>			[x86]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>	[powerpc]
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't have any good way to figure out what kinds of flushes
are being attempted.  Right now, we can try to use the vm
counters, but those only tell us what we actually did with the
hardware (one-by-one vs full) and don't tell us what was actually
_requested_.

This allows us to select out "interesting" TLB flushes that we
might want to optimize (like the ranged ones) and ignore the ones
that we have very little control over (the ones at context
switch).
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154059.4C96CBA5@viggo.jf.intel.comAcked-by: NRik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

I think the flush_tlb_mm_range() code that tries to tune the
flush sizes based on the CPU needs to get ripped out for
several reasons:

1. It is obviously buggy.  It uses mm->total_vm to judge the
   task's footprint in the TLB.  It should certainly be using
   some measure of RSS, *NOT* ->total_vm since only resident
   memory can populate the TLB.
2. Haswell, and several other CPUs are missing from the
   intel_tlb_flushall_shift_set() function.  Thus, it has been
   demonstrated to bitrot quickly in practice.
3. It is plain wrong in my vm:
	[    0.037444] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
	[    0.037444] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
	[    0.037444] tlb_flushall_shift: 6
   Which leads to it to never use invlpg.
4. The assumptions about TLB refill costs are wrong:
	http://lkml.kernel.org/r/1337782555-8088-3-git-send-email-alex.shi@intel.com
    (more on this in later patches)
5. I can not reproduce the original data: https://lkml.org/lkml/2012/5/17/59
   I believe the sample times were too short.  Running the
   benchmark in a loop yields times that vary quite a bit.

Note that this leaves us with a static ceiling of 1 page.  This
is a conservative, dumb setting, and will be revised in a later
patch.

This also removes the code which attempts to predict whether we
are flushing data or instructions.  We expect instruction flushes
to be relatively rare and not worth tuning for explicitly.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154055.ABC88E89@viggo.jf.intel.comAcked-by: NRik van Riel <riel@redhat.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The enable_apic_mode() apic callback is never called, so remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302352320.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the setup_portio_remap() apic callback has been obsolete.  Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302351480.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the multi_timer_check() apic callback has been obsolete.  Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302351120.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

The check_apicid_present() apic callback is never called, so remove it
and functions that implement it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302350160.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the mps_oem_check() apic callback has been obsolete.  Remove it.

This allows generic_mps_oem_check() to be removed as well.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302349390.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the smp_callin_clear_local_apic() apic callback has been obsolete.
Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302349040.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

The trampoline_phys_{high,low} members of struct apic are always
initialized to DEFAULT_TRAMPOLINE_PHYS_HIGH and TRAMPOLINE_PHYS_LOW,
respectively.  Hardwire the constants and remove the unneeded members.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302348330.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the x86_32_numa_cpu_node() apic callback has been obsolete.  Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302348060.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

This moves the espfix64 logic into native_iret.  To make this work,
it gets rid of the native patch for INTERRUPT_RETURN:
INTERRUPT_RETURN on native kernels is now 'jmp native_iret'.

This changes the 16-bit SS behavior on Xen from OOPSing to leaking
some bits of the Xen hypervisor's RSP (I think).

[ hpa: this is a nonzero cost on native, but probably not enough to
  measure. Xen needs to fix this in their own code, probably doing
  something equivalent to espfix64. ]
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>

Add the following interfaces to exposes PMC device state and sleep
state residency via debugfs:
	/sys/kernel/debugfs/pmc_atom/dev_state
	/sys/kernel/debugfs/pmc_atom/sleep_state
Signed-off-by: NAubrey Li <aubrey.li@linux.intel.com>
Link: http://lkml.kernel.org/r/53B0FF59.8000600@linux.intel.comSigned-off-by: NKasagar, Srinidhi <srinidhi.kasagar@intel.com>
Reviewed-by: NRudramuni, Vishwesh M <vishwesh.m.rudramuni@intel.com>
Reviewed-by: NJoe Perches <joe@perches.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Disable PMC S0IX_WAKE_EN events coming from LPC block(unused) and
also from GPIO_SUS ored dedicated IRQs (must be disabled as per PMC
programming rule), GPIOSCORE ored dedicated IRQs (must be disabled
as per PMC programming rule), GPIO_SUS shared IRQ (not necessary
since the IOAPIC_DS wake event will still work), GPIO_SCORE shared
IRQ (not necessary since the IOAPIC_DS wake event will still work).
Signed-off-by: NAubrey Li <aubrey.li@linux.intel.com>
Link: http://lkml.kernel.org/r/53B0FF22.5080403@linux.intel.comSigned-off-by: NOlivier Leveque <olivier.leveque@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The Power Management Controller (PMC) controls many of the power
management features present in the Atom SoC. This driver provides
a native power off function via PMC PCI IO port.

On some ACPI hardware-reduced platforms(e.g. ASUS-T100), ACPI sleep
registers are not valid so that (*pm_power_off)() is not hooked by
acpi_power_off(). The power off function in this driver is installed
only when pm_power_off is NULL.
Signed-off-by: NAubrey Li <aubrey.li@linux.intel.com>
Link: http://lkml.kernel.org/r/53B0FEEA.3010805@linux.intel.comSigned-off-by: NLejun Zhu <lejun.zhu@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The forthcoming patch will make <acpi/acpi.h> to be visible to all kernel
source code. Thus for the architectures that do not support ACPI and
haven't implemented <asm/acenv.h>, we need to make it excluded.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Haswell and newer Intel CPUs have support for RTM, and in that case DR6.RTM is
not fixed to 1 and DR7.RTM is not fixed to zero. That is not the case in the
current KVM implementation. This bug is apparent only if the MOV-DR instruction
is emulated or the host also debugs the guest.

This patch is a partial fix which enables DR6.RTM and DR7.RTM to be cleared and
set respectively. It also sets DR6.RTM upon every debug exception. Obviously,
it is not a complete fix, as debugging of RTM is still unsupported.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now ARM64 support is being added to ACPI so architecture specific
values can not be used in core ACPI code.

Following on the patch "ACPI / processor: Check if LAPIC is present
during initialization" which uses acpi_lapic in acpi_processor.c,
on ARM64 platform, GIC is used instead of local APIC, so acpi_lapic
is not a suitable value for ARM64.

What is actually important at this point is if there is/are CPU
entry/entries (Local APIC/SAPIC, GICC) in MADT, so introduce
acpi_has_cpu_in_madt() to be arch specific and generic.
Signed-off-by: NGraeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

It appears that the BayTrail-T class of hardware requires EFI in order
to powerdown and reboot and no other reliable method exists.

This quirk is generally applicable to all hardware that has the ACPI
Hardware Reduced bit set, since usually ACPI would be the preferred
method.

Cc: Len Brown <len.brown@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The function graph trampoline is called from the function trampoline
and both do a save and restore of registers. The save of registers
done by the function trampoline when only the function graph tracer
is running is a waste of CPU cycles.

As the function graph tracer trampoline in x86 is dependent from
the function trampoline, we can call it directly when a function
is only being traced by the function graph trampoline.
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The arch_mutex_cpu_relax() function, introduced by 34b133f8, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.

This patch (i) renames the call to cpu_relax_lowlatency  ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Stratos Karafotis <stratosk@semaphore.gr>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

It was used only for checking for some K7s which didn't have MP support,
see

http://www.hardwaresecrets.com/article/How-to-Transform-an-Athlon-XP-into-an-Athlon-MP/24

and it was unconditionally set on 64-bit for no reason. Kill it.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1403609105-8332-4-git-send-email-bp@alien8.deSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Dump the flags which denote we have detected and/or have applied bug
workarounds to the CPU we're executing on, in a similar manner to the
feature flags.

The advantage is that those are not accumulating over time like the CPU
features.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1403609105-8332-2-git-send-email-bp@alien8.deSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

When a vSMP Foundation box is detected, the function apic_cluster_num() counts
the number of APIC clusters found. If more than one found, a multi board
configuration is assumed, and TSC marked as unstable. This behavior is
incorrect as vSMP Foundation may use processors from single node only, attached
to memory of other nodes - and such node may have more than one APIC cluster
(typically any recent intel box has more than single APIC_CLUSTERID(x)).

To fix this, we simply remove the code which detects a vSMP Foundation box and
affects apic_is_clusted_box() return value. This can be done because later the
kernel checks by itself if the TSC is stable using the
check_tsc_sync_[source|target]() functions and marks TSC as unstable if needed.
Acked-by: NShai Fultheim <shai@scalemp.com>
Signed-off-by: NOren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1404036068-11674-1-git-send-email-oren@scalemp.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Both the 32-bit and 64-bit cmpxchg.h header define __HAVE_ARCH_CMPXCHG
and there's ifdeffery which checks it. But since both bitness define it,
we can just as well move it up to the main cmpxchg header and simpify a
bit of code in doing that.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20140711104338.GB17083@pd.tnicSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Putting the vvar area after the vdso text is rather complicated: it
only works of the total length of the vdso text mapping is known at
vdso link time, and the linker doesn't allow symbol addresses to
depend on the sizes of non-allocatable data after the PT_LOAD
segment.

Moving the vvar area before the vdso text will allow is to safely
map non-allocatable data after the vdso text, which is a nice
simplification.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/156c78c0d93144ff1055a66493783b9e56813983.1405040914.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This simplifies the code a bit, especially the overflow checks.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

rip_relative is only set if decode_modrm runs, and if you have ModRM
you will also have a memopp.  We can then access memopp unconditionally.
Note that rip_relative cannot be hoisted up to decode_modrm, or you
break "mov $0, xyz(%rip)".

Also, move typecast on "out of range value" of mem.ea to decode_modrm.

Together, all these optimizations save about 50 cycles on each emulated
instructions (4-6%).
Signed-off-by: NBandan Das <bsd@redhat.com>
[Fix immediate operands with rip-relative addressing. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

x86_decode_insn already sets a default for seg_override,
so remove it from the zeroed area. Also replace set/get functions
with direct access to the field.
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A lot of initializations are unnecessary as they get set to
appropriate values before actually being used. Optimize
placement of fields in x86_emulate_ctxt
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Core emulator functions all belong in emulator.c,
x86 should have no knowledge of emulator internals
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We can just blindly move all 16 bytes of ctxt->src's value to ctxt->dst.
write_register_operand will take care of writing only the lower bytes.

Avoiding a call to memcpy (the compiler optimizes it out) gains about
200 cycles on kvm-unit-tests for register-to-register moves, and makes
them about as fast as arithmetic instructions.

We could perhaps get a larger speedup by moving all instructions _except_
moves out of x86_emulate_insn, removing opcode_len, and replacing the
switch statement with an inlined em_mov.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For the next patch we will need to know the full state of the
interrupt shadow; we will then set KVM_REQ_EVENT when one bit
is cleared.

However, right now get_interrupt_shadow only returns the one
corresponding to the emulated instruction, or an unconditional
0 if the emulated instruction does not have an interrupt shadow.
This is confusing and does not allow us to check for cleared
bits as mentioned above.

Clean the callback up, and modify toggle_interruptibility to
match the comment above the call.  As a small result, the
call to set_interrupt_shadow will be skipped in the common
case where int_shadow == 0 && mask == 0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit b4aa0163 ("efifb: Implement vga_default_device() (v2)") added
efifb vga_default_device() so EFI systems that do not load shadow VBIOS or
setup VGA get proper value for boot_vga PCI sysfs attribute on the
corresponding PCI device.

Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such
as MacBookAir2,1.  Xorg detects the GPU and finds the DRI device but then
bails out with "no devices detected".

Note: When vga_default_device() is set boot_vga PCI sysfs attribute
reflects its state.  When unset this attribute is 1 whenever
IORESOURCE_ROM_SHADOW flag is set.

With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete
while having native drivers for the GPU also makes selecting sysfb/efifb
optional.

Remove the efifb implementation of vga_default_device() and initialize
vgaarb's vga_default_device() with the PCI GPU that matches boot
screen_info in pci_fixup_video().

[bhelgaas: remove unused "dev" in efifb_setup()]
Fixes: b4aa0163 ("efifb: Implement vga_default_device() (v2)")
Tested-by: NAnibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com>
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMatthew Garrett <matthew.garrett@nebula.com>
CC: stable@vger.kernel.org	# v3.5+

I've observed kvmclock being marked as unstable on a modern
single-socket system with a stable TSC and qemu-1.6.2 or qemu-2.0.0.

The culprit was failure in TSC matching because of overflow of
kvm_arch::nr_vcpus_matched_tsc in case there were multiple TSC writes
in a single synchronization cycle.

Turns out that qemu does multiple TSC writes during init, below is the
evidence of that (qemu-2.0.0):

The first one:

 0xffffffffa08ff2b4 : vmx_write_tsc_offset+0xa4/0xb0 [kvm_intel]
 0xffffffffa04c9c05 : kvm_write_tsc+0x1a5/0x360 [kvm]
 0xffffffffa04cfd6b : kvm_arch_vcpu_postcreate+0x4b/0x80 [kvm]
 0xffffffffa04b8188 : kvm_vm_ioctl+0x418/0x750 [kvm]

The second one:

 0xffffffffa08ff2b4 : vmx_write_tsc_offset+0xa4/0xb0 [kvm_intel]
 0xffffffffa04c9c05 : kvm_write_tsc+0x1a5/0x360 [kvm]
 0xffffffffa090610d : vmx_set_msr+0x29d/0x350 [kvm_intel]
 0xffffffffa04be83b : do_set_msr+0x3b/0x60 [kvm]
 0xffffffffa04c10a8 : msr_io+0xc8/0x160 [kvm]
 0xffffffffa04caeb6 : kvm_arch_vcpu_ioctl+0xc86/0x1060 [kvm]
 0xffffffffa04b6797 : kvm_vcpu_ioctl+0xc7/0x5a0 [kvm]

 #0  kvm_vcpu_ioctl at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1780
 #1  kvm_put_msrs at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1270
 #2  kvm_arch_put_registers at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1909
 #3  kvm_cpu_synchronize_post_init at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1641
 #4  cpu_synchronize_post_init at /build/buildd/qemu-2.0.0+dfsg/include/sysemu/kvm.h:330
 #5  cpu_synchronize_all_post_init () at /build/buildd/qemu-2.0.0+dfsg/cpus.c:521
 #6  main at /build/buildd/qemu-2.0.0+dfsg/vl.c:4390

The third one:

 0xffffffffa08ff2b4 : vmx_write_tsc_offset+0xa4/0xb0 [kvm_intel]
 0xffffffffa04c9c05 : kvm_write_tsc+0x1a5/0x360 [kvm]
 0xffffffffa090610d : vmx_set_msr+0x29d/0x350 [kvm_intel]
 0xffffffffa04be83b : do_set_msr+0x3b/0x60 [kvm]
 0xffffffffa04c10a8 : msr_io+0xc8/0x160 [kvm]
 0xffffffffa04caeb6 : kvm_arch_vcpu_ioctl+0xc86/0x1060 [kvm]
 0xffffffffa04b6797 : kvm_vcpu_ioctl+0xc7/0x5a0 [kvm]

 #0  kvm_vcpu_ioctl at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1780
 #1  kvm_put_msrs  at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1270
 #2  kvm_arch_put_registers  at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1909
 #3  kvm_cpu_synchronize_post_reset  at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1635
 #4  cpu_synchronize_post_reset  at /build/buildd/qemu-2.0.0+dfsg/include/sysemu/kvm.h:323
 #5  cpu_synchronize_all_post_reset () at /build/buildd/qemu-2.0.0+dfsg/cpus.c:512
 #6  main  at /build/buildd/qemu-2.0.0+dfsg/vl.c:4482

The fix is to count each vCPU only once when matched, so that
nr_vcpus_matched_tsc holds the size of the matched set. This is
achieved by reusing generation counters. Every vCPU with
this_tsc_generation == cur_tsc_generation is in the matched set. The
match set is cleared by setting cur_tsc_generation to a value which no
other vCPU is set to (by incrementing it).

I needed to bump up the counter size form u8 to u64 to ensure it never
overflows. Otherwise in cases TSC is not written the same number of
times on each vCPU the counter could overflow and incorrectly indicate
some vCPUs as being in the matched set. This scenario seems unlikely
but I'm not sure if it can be disregarded.
Signed-off-by: NTomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>