Let's introduce one more of those orthogonal feature macros. This should
hopefully make the code more readable and make things easier for new platform
enabling.

This time, HAS_FPGA_DBG_UNCLAIMED() is true for platforms that have bit
31 of FPGA_DBG able to signal unclaimed writes.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This way, when adding a device flag we don't have to manually maintain
that list.

v2: undefine the helper macros (Jani Nikula, Daniel Vetter)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DEV_INFO_FOR_FLAG() now takes 2 parameters:
  • A function to apply to the flag
  • A separator

This will allow us to use the macro twice in the DRM_DEBUG_DRIVER() call
of i915_dump_device_info().

v2: Fix a typo in the subject (Jani Nikula)
v3: Undef the helper macros (Jani Nikula, Daniel vetter)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of calling into the DRM helper layer to poll all connectors for
changes in connected displays probe only those connectors which have
received a hotplug event.

v2: Resolved conflicts with changes in previous commits.
    Renamed function and and added a WARN_ON() to warn of
    intel_hpd_irq_event() from being called without
    mode_config.mutex held - suggested by Jani Nikula.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This way it is possible to limit 're'-detect() of displays to connectors
which have received an HPD event.

v2: Reordered drm_i915_private: Move hpd_event_bits to hpd state tracking.
v3: Fixed merge conflicts with previous patches.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to hold the rps lock around punit access.
Reported-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we have function pointers, it's cleaner to just create a new
per-platform PTE encoding function.

This should be identical in behavior to the previous code.

v2: Drop accidental inline keyword on hsw_pte_encode.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Tested-by: Daniel Leung <daniel.leung@linux.intel.com> [v1]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On Bay Trail, bit 1 means "writeable by the GPU."  Failing to set that
means basically anything using the GPU will cause hangs.

v2: Drop accidental inline keyword on byt_pte_encode.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Tested-by: Daniel Leung <daniel.leung@linux.intel.com> [v1]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sandybridge/Ivybridge, Bay Trail, and Haswell all have slightly
different page table entry formats.  Rather than polluting one function
with generation checks, simply use a function pointer and set up the
correct PTE encoding function at startup.

v2: Move the gen6_gtt_pte_t typedef to i915_drv.h so that the function
    pointers and implementations have identical signatures.  Also remove
    inline keyword on gen6_pte_encode.  Both suggested by Jani Nikula.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NJani Nikula <jani.nikula@linux.intel.com>
Tested-by: Daniel Leung <daniel.leung@linux.intel.com> [v1]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This allows unifying a bunch of the PLL calculations and whatnot.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Minor cleanup.  Would be nice to use an enum for channel in the DPIO
macros so we don't mix up pipes and channels, but that's for another
patch.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We are trying to have more platform-orthogonal pieces of code. The DDI
code shouldn't mention Haswell.

v2: Fix the email address
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Shame on me for not putting the bit definitions next to the register
definition in the first place.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... inside haswell_get_pipe_config. Because there's one TRANS_DDI_FUNC_CTL
register per CPU transcoder, not per pipe. This solves "unclaimed register"
messages when booting with eDP only and using the i915.disable_power_well=1.

Also fix a comment and remove an useless empty line.

The error messages were caused by:

  commit 88adfff1
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Thu Mar 28 10:42:01 2013 +0100
      drm/i915: hw readout support for ->has_pch_encoders
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This fixes "unclaimed register" messages when booting with eDP only
and i915.disable_power_well=1.

The error messages were caused by:

  commit 0e8ffe1b
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Thu Mar 28 10:42:00 2013 +0100
      drm/i915: add hw state readout/checking for pipe_config
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is bad news and shouldn't be happening.

V2: Rebase.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In this commit we enable both CPU and PCH FIFO underrun reporting and
start reporting them. We follow a few rules:
  - after we receive one of these errors, we mask the interrupt, so
    we won't get an "interrupt storm" and we also won't flood dmesg;
  - at each mode set we enable the interrupts again, so we'll see each
    message at most once per mode set;
  - in the specific places where we need to ignore the errors, we
    completely mask the interrupts.

The downside of this patch is that since we're completely disabling
(masking) the interrupts instead of just not printing error messages,
we will mask more than just what we want on IVB/HSW CPU interrupts
(due to GEN7_ERR_INT) and on CPT/PPT/LPT PCHs (due to SERR_INT). So
when we decide to mask PCH FIFO underruns for pipe A on CPT, we'll
also be masking PCH FIFO underruns for pipe B, because both are
reported by SERR_INT, which has to be either completely enabled or
completely disabled (in othe words, there's no way to disable/enable
specific bits of GEN7_ERR_INT and SERR_INT).

V2: Rename some functions and variables, downgrade messages to
DRM_DEBUG_DRIVER and rebase.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In Valleyview voltage swing, pre-emphasis and lane control registers can
be programmed only through the h/w side band fabric.  Update
vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the
appropriate programming.

We need to make sure that the tx lane reset occurs in both the full mode
set and DPMS paths, so factor things out to allow that.

v2: use different DPIO_DIVISOR values for VGA and DisplayPort
v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values
        for all display interfaces
v4: collapse with various updates
v5: squash with crtc enable/pll enable bits
v6: split out DP code (jbarnes)
    put phyready check under IS_VALLEYVIEW (jbarnes)
    remove unneeded check in 9xx pll div update (Jani)
    wrap VLV pll update call in IS_VALLEYVIEW (Jani)
    move port enable back to end of crtc enable (jbarnes)
    put phyready check under IS_VALLEYVIEW (jbarnes)
v7: fix up conflicts against latest drm-intel-next-queued
v8: use DPIO reg names, fix pipes (Jani)
    from mPhy_registers_VLV2_ww20p5 doc
v9: update to latest info from driver enabling notes doc
    driver_vbios_notes_9
v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work
     simultaneously (Jesse)
v11: use pll/port callbacks for DPIO port activity (Daniel)
     use separate VLV CRTC enable function (Daniel)
     move around port ready checks (Jesse)
Signed-off-by: NPallavi G <pallavi.g@intel.com>
Signed-off-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Drop pfit changes and add a little comment explaining that
vlv has a different enable sequence and so needs it's own crtc_enable
callback. Also apply a fixup patch from Wu Fengguang to shut up some
compiler warnings.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is a reset feature we don't actually need.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Make it compile.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Program few Tx buffer Swing control settings through DPIO.

v2: fix up codingstyle (Daniel)
    call from set_signal_levels (Ville, Daniel)
    use proper port numbers (Jesse)
Signed-off-by: NPallavi G <pallavi.g@intel.com>
Signed-off-by: NYogesh M <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2 changes)
[danvet: Reorder if-ladder to avoid two IS_VLV checks.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Stolen from a patch with the below impressive sob-section.
Signed-off-by: NPallavi G <pallavi.g@intel.com>
Signed-off-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Drop everything but the header #defines.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Magic updates.

v2: use 64 bit types and math (Ville)

v3: Trim out all the m/n/p calculation changes since they are still
under discussion. Instead squash in a fixup for hdmi limits which
slipped into a different patch.
Signed-off-by: NPallavi G <pallavi.g@intel.com>
Signed-off-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NYogesh M <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Uses slightly different interfaces than other platforms.

v2: track actual set freq, not requested (Rohit)
    fix debug prints in init code (Jesse)
v3: don't write sleep reg (Jesse)
    re-add RC6 wake limit write (Ben)
    fixup thresholds to match other platforms (Ben)
    clean up mem freq calculation (Ben)
    clean up debug prints (Ben)
v4: move defines from punit patch (Ville)
v5: remove writes to nonexistent regs (Jesse)
    put RP and RC regs together (Jesse)
    fix RC6 enable (Jesse)
v6: use correct fuse reads from NC (Jesse)
    split out min/max funcs for use in sysfs (Jesse)
    add debugfs & sysfs freq controls (Jesse)
v7: update with Ben's hw_max changes (Jesse)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v6)
[danvet: Follow checkpatch sugggestion to use min_t to avoid casting
fun.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When requesting frequency changes or querying status from the Punit, we
need to use an opcode that corresponds to the frequency, taking into
account the memory frequency.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add sprite_name() macro which should be used with the kind of sprites
that are fixed to pipes (gen4.5+).

Also use dev_priv->num_plane to calculate the sprite index insted
assuming two sprites per pipe. This should make it print the right
name.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Print the alphabetical name for transcoders. The code already used the
pipe_name() macro for transcoders, so I did the same. But we do have the
(unused) transcoder_name() macro which could be used instead.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Alway use the alphabetical names in debug/error messages for planes,
pipes and ports, instead of using decimal numbers occasionally.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Get rid of the few remaining open coded copies of
pipe_name() and port_name().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When adding the pipe config computation step I've accidentally moved
this a bit away. Which momentarily confused me since the pipe config
step rejected some modesetting operations I expected and so left me
looking in vain for that debug output.

v2: Move the debug output into the right function to prevent this from
happening again.

v3: Make it compile (Ville). Also reorder the patch so that the two
bugfixes are first.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We can only enable the pfit if the pipe is disabled. Ensure that this
is obeyed with a neat assert.

Also check whether the pfit is off before enabling it - if not we've
lost track of things somewhere since the pfit is only ever used by the
lvds output.

v2: Fix spell fail in the commit message pointed out by Ville&Jani.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The i9xx modeset sequence is currently pretty fishy, so tight it all
up with some good assert-sprinkling.

We already have good coverage on the disable side, but the enable side
is spotty (since until recently it was wrong).
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just blows through 50ms for naught, since the pipe is off.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is horrible lore and we should be able to get rid of it now
that the lvds/pfit handling code actually does the right thing.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Oops.

This regression has been introduced in

commit 5d2d38dd
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 27 00:45:01 2013 +0100

    drm/i915: clean up pipe bpp confusion
Reported-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For a bunch of reason we need to more accurately track this:
- hw pipe state readout for Haswell needs the cpu transcoder.
- We need to know the right cpu transcoder in a bunch of places in
  ->disable and other modeset callbacks.

In the future we need to add hw state readout&check support, too. But
to avoid ugly merge conflicts do the rote sed job now without any
functional changes.

v2: Preserve the cpu_transcoder value when overwriting crtc->config.
Reported by Paulo.

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
[danvet: Removed rough whitespace that Chris spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Bits 30 and 24:0 are PBC, so don't zero them. Some of the other bits
are being zeroed, but I couldn't find a reason for this, so leave them
as they are for now to avoid regressions.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
[danvet: Delete the redudant #define that Imre spotted in his review.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Check the VBT to see if the machine has inverted FDI RX polarity on
CPT. Based on this bit, set the appropriate bit on the TRANS_CHICKEN2
registers.

This should fix some machines that were showing black screens on all
outputs.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60029Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>