During system suspend mark ACPI buttons (other than the lid) as
"suspended" and if in that state, report wakeup events on button
events, but do not propagate those events up the stack.

This prevents systems from being turned off after a button-triggered
wakeup from the "freeze" sleep state.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77611
Tested-on: Acer Aspire S5, Toshiba Portege R500
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

As reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1025690
This is yet another model which needs this quirk.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1025690Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit 886129a8 (ACPI / video: change acpi-video
brightness_switch_enabled default to 0) as it is reported to cause
problems to happen.

Fixes: 886129a8 (ACPI / video: change acpi-video brightness_switch_enabled default to 0)
Link: http://marc.info/?l=linux-acpi&m=140534286826819&w=2
Reported by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The soc_button_array PNP driver was introduced in 3.15.
But in commit eec15edb (ACPI / PNP: use device ID list for
PNPACPI device enumeration), when reworking the PNPACPI device
enumeration, we missed the soc_button_array device ID.

This results in a regression in 3.16-rc1 that soc_button_array
pnp device fails to be enumerated.

Fix the problem by adding soc_button_array device ID into the
acpi_pnp scan handler's ID list.

Fixes: eec15edb (ACPI / PNP: use device ID list for PNPACPI device enumeration)
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix backlight control for Acer TravelMate B113 Laptop by adding
it to the video_dmi_table.

A workaround before that was to use acpi_osi=Linux or
acpi_backlight=vendor on boot but even then, only the function-
keys worked.

With this change there is no need for boot parameters and DE's
controls work as well.
Signed-off-by: NMartin Kepplinger <martink@posteo.de>
[rjw: Subject]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

With win8 capabiltiy, the ACPI backlight control is broken.
The system also loses backlight setting when resuming from S3.

Add this model to the the ACPI video detect blacklist to make backlight
functionality work.

Although backlight functionality works via video.use_native_backlight=1,
this approach may be safer.
Signed-off-by: NEdward Lin <yidi.lin@canonical.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Some Thinkpad laptops' firmware will initiate a backlight level change
request through operation region on the events of AC plug/unplug, but
since we are not using firmware's interface to do the backlight setting
on these affected laptops, we do not want the firmware to use some
arbitrary value from its ASL variable to set the backlight level on
AC plug/unplug either.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=76491
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77091Reported-and-tested-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com>
Reported-and-tested-by: NAnton Gubarkov <anton.gubarkov@gmail.com>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

It seems that some batteries (noticed on DELL JYPJ136) assume
capacity_now = design_capacity when fully charged. This causes
reported capacity to suddenly jump to >full_charge_capacity (and that
means capacity reported to userspace is >100% and incorrect)
values after 99%. This patch detects capacity_now > full_charge_capacity,
notifies userspace (unless it is the known bug where capacity_now ==
design_capacity) and trims the value to full_charge_capacity.
Signed-off-by: NJosef Gajdusek <atx@atx.name>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The recently merged change (in v3.14-rc6) to ACPI resource detection
(below) causes all zero length ACPI resources to be elided from the
table:

  commit b355cee8
  Author: Zhang Rui <rui.zhang@intel.com>
  Date:   Thu Feb 27 11:37:15 2014 +0800

    ACPI / resources: ignore invalid ACPI device resources

This change has caused a regression in (at least) serial port detection
for a number of machines (see LP#1313981 [1]).  These seem to represent
their IO regions (presumably incorrectly) as a zero length region.
Reverting the above commit restores these serial devices.

Only elide zero length resources which lie at address 0.

Fixes: b355cee8 (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Some machines (eg. Lenovo Z480) ECs are not stable during boot up
and causes battery driver fails to be loaded due to failure of getting
battery information from EC sometimes. After several retries, the
operation will work. This patch is to retry to get battery information 5
times if the first try fails.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=75581Reported-and-tested-by: Nnaszar <naszar@ya.ru>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Smatch detected two memory leaks on saved_ec:

drivers/acpi/ec.c:1070 acpi_ec_ecdt_probe() warn: possible
  memory leak of 'saved_ec'
drivers/acpi/ec.c:1109 acpi_ec_ecdt_probe() warn: possible
  memory leak of 'saved_ec'

Free saved_ec on these two error exit paths to stop the memory
leak.  Note that saved_ec maybe null, but kfree on null is allowed.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Developers really don't need to translate EC_SC(R) in mind as long as the
field details are decoded in the debugging message.
Tested-by: NGareth Williams <gareth@garethwilliams.me.uk>
Tested-by: NSteffen Weber <steffen.weber@gmail.com>
Tested-by: NHans de Goede <jwrdegoede@fedoraproject.org>
Tested-by: NArthur Chen <axchen@nvidia.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The bug fixes and asynchronous improvements have been done to the EC driver
by the previous commits. This patch increases the revision to 2.2 to
indicate the behavior differences between the old and the new drivers. The
copyright/authorship notices are also updated.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There is a race condition in ec_transaction_completed().

When ec_transaction_completed() is called in the GPE handler, it could
return true because of (ec->curr == NULL). Then the wake_up() invocation
could complete the next command unexpectedly since there is no lock between
the 2 invocations. With the previous cleanup, the IBF=0 waiter race need
not be handled any more. It's now safe to return a flag from
advance_condition() to indicate the requirement of wakeup, the flag is
returned from a locked context.

The ec_transaction_completed() is now only invoked by the ec_poll() where
the ec->curr is ensured to be different from NULL.

After cleaning up, the EVT_SCI=1 check should be moved out of the wakeup
condition so that an EVT_SCI raised with (ec->curr == NULL) can trigger a
QR_SC command.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911Reported-and-tested-by: NGareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: NHans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: NBarton Xu <tank.xuhan@gmail.com>
Tested-by: NSteffen Weber <steffen.weber@gmail.com>
Tested-by: NArthur Chen <axchen@nvidia.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

After we've added the first command byte write into advance_transaction(),
the IBF=0 waiter is duplicated with the command completion waiter
implemented in the ec_poll() because:
   If IBF=1 blocked the first command byte write invoked in the task
   context ec_poll(), it would be kicked off upon IBF=0 interrupt or timed
   out and retried again in the task context.

Remove this seperate and duplicate IBF=0 waiter.  By doing so we can
reduce the overall number of times to access the EC_SC(R) status
register.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911Reported-and-tested-by: NGareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: NHans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: NBarton Xu <tank.xuhan@gmail.com>
Tested-by: NSteffen Weber <steffen.weber@gmail.com>
Tested-by: NArthur Chen <axchen@nvidia.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Move the first command byte write into advance_transaction() so that all
EC register accesses that can affect the command processing state machine
can happen in this asynchronous state machine advancement function.

The advance_transaction() function then can be a complete implementation
of an asyncrhonous transaction for a single command so that:
 1. The first command byte can be written in the interrupt context;
 2. The command completion waiter can also be used to wait the first command
    byte's timeout;
 3. In BURST mode, the follow-up command bytes can be written in the
    interrupt context directly, so that it doesn't need to return to the
    task context. Returning to the task context reduces the throughput of
    the BURST mode and in the worst cases where the system workload is very
    high, this leads to the hardware driven automatic BURST mode exit.

In order not to increase memory consumption, convert 'done' into 'flags'
to contain multiple indications:
 1. ACPI_EC_COMMAND_COMPLETE: converting from original 'done' condition,
    indicating the completion of the command transaction.
 2. ACPI_EC_COMMAND_POLL: indicating the availability of writing the first
    command byte. A new command can utilize this flag to compete for the
    right of accessing the underlying hardware. There is a follow-up bug
    fix that has utilized this new flag.

The 2 flags are important because it also reflects a key concept of IO
programs' design used in the system softwares. Normally an IO program
running in the kernel should first be implemented in the asynchronous way.
And the 2 flags are the most common way to implement its synchronous
operations on top of the asynchronous operations:
1. POLL: This flag can be used to block until the asynchronous operations
         can happen.
2. COMPLETE: This flag can be used to block until the asynchronous
             operations have completed.
By constructing code cleanly in this way, many difficult problems can be
solved smoothly.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911Reported-and-tested-by: NGareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: NHans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: NBarton Xu <tank.xuhan@gmail.com>
Tested-by: NSteffen Weber <steffen.weber@gmail.com>
Tested-by: NArthur Chen <axchen@nvidia.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The advance_transaction() will be invoked from the IRQ context GPE handler
and the task context ec_poll(). The handling of this function is locked so
that the EC state machine are ensured to be advanced sequentially.

But there is a problem. Before invoking advance_transaction(), EC_SC(R) is
read. Then for advance_transaction(), there could be race condition around
the lock from both contexts. The first one reading the register could fail
this race and when it passes the stale register value to the state machine
advancement code, the hardware condition is totally different from when
the register is read. And the hardware accesses determined from the wrong
hardware status can break the EC state machine. And there could be cases
that the functionalities of the platform firmware are seriously affected.
For example:
 1. When 2 EC_DATA(W) writes compete the IBF=0, the 2nd EC_DATA(W) write may
    be invalid due to IBF=1 after the 1st EC_DATA(W) write. Then the
    hardware will either refuse to respond a next EC_SC(W) write of the next
    command or discard the current WR_EC command when it receives a EC_SC(W)
    write of the next command.
 2. When 1 EC_SC(W) write and 1 EC_DATA(W) write compete the IBF=0, the
    EC_DATA(W) write may be invalid due to IBF=1 after the EC_SC(W) write.
    The next EC_DATA(R) could never be responded by the hardware. This is
    the root cause of the reported issue.

Fix this issue by moving the EC_SC(R) access into the lock so that we can
ensure that the state machine is advanced consistently.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911Reported-and-tested-by: NGareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: NHans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: NBarton Xu <tank.xuhan@gmail.com>
Tested-by: NSteffen Weber <steffen.weber@gmail.com>
Tested-by: NArthur Chen <axchen@nvidia.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Revert commit ab0fd674 (ACPI / AC: Remove AC's proc directory.),
because some old tools (e.g. kpowersave from kde 3.5.10) are still
using /proc/acpi/ac_adapter.

Fixes: ab0fd674 (ACPI / AC: Remove AC's proc directory.)
Reported-and-tested-by: NSorin Manolache <sorinm@gmail.com>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

simple_strto*() are obsolete; use kstrto*() instead. Add proper error
checking.
Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On Acer Aspire V5-573G battery notifications are sometimes
triggered too early. For example, when AC is unplugged and
notification is triggered, battery state is still reported as
"Full", and changes to "Discharging" only after short delay,
without any notification.

This patch solves the problem by adding 1 second sleep.
Similar quirk is already implemented in AC driver for other laptop.
Signed-off-by: NAlexander Mezin <mezin.alexander@gmail.com>
Acked-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Use callback for setting up quirk instead of checking return code
of dmi_check_system(). This change will allow using bat_dmi_table
for other quirks.
Signed-off-by: NAlexander Mezin <mezin.alexander@gmail.com>
Acked-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On Intel Baytrail, some I2C host controllers are held in reset when the OS
gets control. This causes the driver to fail to detect the hardware
properly.

Fix this so that we make sure that the I2C host controller is not in reset
when the driver gets probe'd.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Adds trace events that give finer resolution into suspend/resume. These
events are graphed in the timelines generated by the analyze_suspend.py
script. They represent large areas of time consumed that are typical to
suspend and resume.

The event is triggered by calling the function "trace_suspend_resume"
with three arguments: a string (the name of the event to be displayed
in the timeline), an integer (case specific number, such as the power
state or cpu number), and a boolean (where true is used to denote the start
of the timeline event, and false to denote the end).

The suspend_resume trace event reproduces the data that the machine_suspend
trace event did, so the latter has been removed.
Signed-off-by: NTodd Brandt <todd.e.brandt@intel.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Now that we're hoping to have resolved all of the problems with
video.use_native_backlight=1, make that the default at last.

Link: http://marc.info/?l=linux-acpi&m=139716088401106&w=2Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Use acpi_os_map_generic_address to pre-map the reset register if it is
memory mapped, thereby preventing the BUG_ON() in line 1319 of
mm/vmalloc.c from triggering during panic-triggered reboots.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77131Signed-off-by: NRandy Wright <rwright@hp.com>
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
[rjw: Changelog, simplified code]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The _PRP method is not going to be a part of the ACPI standard. This patch
removes its support code introduced by the following commits:
 1. ACPICA: Predefined names: Add support for the _PRP method.
 2. ACPICA: Update for _PRP predefined name.
 3. ACPICA: Add support for _LPD and _PRP methods.
 4. ACPICA: Back port of _PRP update.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The following warning message is triggered:
 WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:136 __early_ioremap+0x11f/0x1f2()
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1-00017-g86dfc6f3-dirty #298
 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x036.091920111209 09/19/2011
  0000000000000009 ffffffff81b75c40 ffffffff817c627b 0000000000000000
  ffffffff81b75c78 ffffffff81067b5d 000000000000007b 8000000000000563
  00000000b96b20dc 0000000000000001 ffffffffff300e0c ffffffff81b75c88
 Call Trace:
  [<ffffffff817c627b>] dump_stack+0x45/0x56
  [<ffffffff81067b5d>] warn_slowpath_common+0x7d/0xa0
  [<ffffffff81067c3a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff81d4b9d5>] __early_ioremap+0x11f/0x1f2
  [<ffffffff81d4bc5b>] early_ioremap+0x13/0x15
  [<ffffffff81d2b8f3>] __acpi_map_table+0x13/0x18
  [<ffffffff817b8d1a>] acpi_os_map_memory+0x26/0x14e
  [<ffffffff813ff018>] acpi_tb_acquire_table+0x42/0x70
  [<ffffffff813ff086>] acpi_tb_validate_table+0x27/0x37
  [<ffffffff813ff0e5>] acpi_tb_verify_table+0x22/0xd8
  [<ffffffff813ff6a8>] acpi_tb_install_non_fixed_table+0x60/0x1c9
  [<ffffffff81d61024>] acpi_tb_parse_root_table+0x218/0x26a
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d610cd>] acpi_initialize_tables+0x57/0x59
  [<ffffffff81d5f25d>] acpi_table_init+0x1b/0x99
  [<ffffffff81d2bca0>] acpi_boot_table_init+0x1e/0x85
  [<ffffffff81d23043>] setup_arch+0x99d/0xcc6
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d1bbbe>] start_kernel+0x8b/0x415
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d1b5ee>] x86_64_start_reservations+0x2a/0x2c
  [<ffffffff81d1b72e>] x86_64_start_kernel+0x13e/0x14d
 ---[ end trace 11ae599a1898f4e7 ]---
when installing the following table during early stage:
 ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL  S2600CP  00004000 INTL 20100331)
The regression is caused by the size limitation of the x86 early IO mapping.

The root cause is:
 1. ACPICA doesn't split IO memory mapping and table mapping;
 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
    mechanism during early boot stage, which is more suitable for only IO
    mappings.

This patch fixes this issue by utilizing acpi_gbl_verify_table_checksum to
disable the table mapping during early stage and enabling it again for the
late stage. In this way, the normal code path is not affected. Then after
the code related to the root cause is cleaned up, the early checksum
verification can be easily re-enabled.

A new boot parameter - acpi_force_table_verification is introduced for
the platforms that require the checksum verification to stop loading bad
tables.

This fix also covers the checksum verification for the table overrides. Now
large tables can also be overridden using the initrd override mechanism.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: NYuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

It is reported that Linux x86 kernel cannot map large tables. The following
large SSDT table on such platform fails to pass checksum verification and
cannot be installed:
 ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL  S2600CP  00004000 INTL 20100331)

It sounds strange that in the 64-bit virtual memory address space, we
cannot map a single ACPI table to do checksum verification. The root cause
is:
 1. ACPICA doesn't split IO memory mapping and table mapping;
 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
    mechanism during early boot stage, which is more suitable for only IO
    mappings.

ACPICA originally only mapped table header for signature validation, and
this header mapping is required by OSL override mechanism. There was no
checksum verification because we could not map the whole table using this
OSL. While the following ACPICA commit enforces checksum verification by
mapping the whole table during Linux boot stage and it finally triggers
this issue on some platforms:
 Commit: 86dfc6f3
 Subject: ACPICA: Tables: Fix table checksums verification before installation.

Before doing further cleanups for the OSL table mapping and override
implementation, this patch introduces an option for such OSPMs to
temporarily discard the checksum verification feature. It then can be
re-enabled easily when the ACPICA and the underlying OSL is ready.

This patch also deletes a comment around the limitation of mappings because
it is not correct. The limitation is not how many times we can map in the
early stage, but the OSL mapping facility may not be suitable for mapping
the ACPI tables and thus may complain us the size limitation.

The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the
work around added, it now only applies to the table descriptor that hasn't
been installed and cannot be used in other cases. Lv Zheng.
Tested-by: NYuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Because of the growing demand for enumerating ACPI devices to
platform bus, change the code to enumerate ACPI device objects to
platform bus by default.  Namely, create platform devices for the
ACPI device objects that
 1. Have pnp.type.platform_id set (device objects with _HID currently).
 2. Do not have a scan handler attached.
 3. Are not SPI/I2C slave devices (that should be enumerated to the
    appropriate buses bus by their parent).
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog, rebase and code cleanup]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Prevent platform devices from being created for ACPI LPSS devices
if CONFIG_X86_INTEL_LPSS is unset by compiling out the LPSS scan
handler's callbacks only in that case and still compiling its device
ID list in and registering the scan handler in either case.

This change is based on a prototype from Zhang Rui.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Prevent platform devices from being created for ACPI memory device
objects if CONFIG_ACPI_HOTPLUG_MEMORY is unset by compiling out the
memory hotplug scan handler's callbacks only in that case and still
compiling its device ID list in and registering the scan handler in
either case.

Also unset the memory hotplug scan handler's .attach() callback
if acpi_no_memhotplug is set, but still register the scan handler to
avoid creating platform devices for ACPI memory devices in that case
too.

This change is based on a prototype from Zhang Rui.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Prevent platform devices from being created for ACPI containers
if CONFIG_ACPI_CONTAINER is unset by compiling out the container
scan handler's callbacks only in that case and still compiling
its device ID list in and registering the scan handler in either
case.

This change is based on a prototype from Zhang Rui.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Currently, some scan handlers can be compiled out entirely, which
leaves the device objects they normally attach to without a scan
handler.  This isn't a problem as long as we don't have any default
enumeration mechanism that applies to all devices without a scan
handler.  However, if such a default enumeration is added, it still
should not be applied to devices that are normally attached to by
scan handlers, because that may result in creating "physical" device
objects of a wrong type for them.

Since we are going to create platform device objects for all ACPI
device objects with pnp.type.platform_id set by default, clear
pnp.type.platform_id where there is a matching scan handler without
an .attach() callback and otherwise simply treat that scan handler
as though the .attach() callback was present but always returned 0.

This will allow us to compile out scan handler callbacks and leave
the device ID lists used by them so as to prevent creating platform
device objects for the matching ACPI devices.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Only certain types of ACPI device objects can be enumerated as
platform devices, so in order to distinguish them from the others
introduce a new ACPI device PNP type flag, platform_id, and set it
for devices with a valid _HID to start with.

This change is based on a Zhang Rui's prototype.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

The "serial" PNP driver supports some "unknown" PNP modems
(PNPCXXX/PNPDXXX) by matching magic strings in the PNP device name
or the PNP device card name.

ACPI enumerated PNP devices neither are PNP cards, nor have those
magic strings in device names, so this mechamism never actually works
for ACPI enumerated PNPCXXX/PNPDXXX devices.

Consequently, it is safe to remove those two IDs from the PNP ACPI scan
handler's device ID list.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

The PNP ACPI scan handler device ID list includes all the IDs from
all of the struct pnp_device_id instances in the tree, but some of
them do not follow the ACPI PNP ID rule (3 letters + 4 hex digits).

For those IDs, the coressponding devices will never be enumerated
via ACPI, so it is safe to remove them from the PNP ACPI ID list.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

ACPI can be used to enumerate PNP devices, but the code does not
handle this in the right way currently.  Namely, if an ACPI device
object
 1. Has a _CRS method,
 2. Has an identification of
    "three capital characters followed by four hex digits",
 3. Is not in the excluded IDs list,
it will be enumerated to PNP bus (that is, a PNP device object will
be create for it).  This means that, actually, the PNP bus type is
used as the default bus type for enumerating _HID devices in ACPI.

However, more and more _HID devices need to be enumerated to the
platform bus instead (that is, platform device objects need to be
created for them).  As a result, the device ID list in acpi_platform.c
is used to enforce creating platform device objects rather than PNP
device objects for matching devices.  That list has been continuously
growing recently, unfortunately, and it is pretty much guaranteed to
grow even more in the future.

To address that problem it is better to enumerate _HID devices
as platform devices by default.  To this end, change the way of
enumerating PNP devices by adding a PNP ACPI scan handler that
will use a device ID list to create PNP devices for the ACPI
device objects whose device IDs are present in that list.

The initial device ID list in the PNP ACPI scan handler contains
all of the pnp_device_id strings from all the existing PNP drivers,
so this change should be transparent to the PNP core and all of the
PNP drivers.  Still, in the future it should be possible to reduce
its size by converting PNP drivers that need not be PNP for any
technical reasons into platform drivers.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
[rjw: Rewrote the changelog, modified the PNP ACPI scan handler code]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Introduce a .match() callback for ACPI scan handlers to allow them to
use more elaborate matching algorithms if necessary.  That is needed
for the upcoming PNP scan handler in particular.

This change is based on a Zhang Rui's prototype.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

ACPI Battery device receives notifications from firmware frequently,
and most of these notifications are some general events, like battery
remaining capacity change, etc, which should not wake the system up
if the system is in suspend/hibernate state.

This causes a problem that the system wakes up from suspend to freeze
shortly, because there is an ACPI battery notification every 10 seconds.

Fix the problem in this patch by registering ACPI battery device'
own wakeup source, and waking up the system only when the battery remaining
capacity is critical low, or lower than the alarm capacity set via _BTP.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=76221Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI battery device receives notifications when
1. the remaining battery capacity becomes critical low
2. the trip point set by the _BTP (Design capacity of Warning by default)
   is reached or crossed.

So it is able to support POWER_SUPPLY_PROP_CAPACITY_LEVEL to report
        POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
        POWER_SUPPLY_CAPACITY_LEVEL_LOW,
        POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
        POWER_SUPPLY_CAPACITY_LEVEL_FULL,
capacity levels to power supply core and user space.

Introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL in this patch.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>