- 29 5月, 2005 40 次提交
-
-
由 Takashi Iwai 提交于
ES1968 driver Added the vendor id 0x1558 to the power management whitelist of es1968 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Bunk 提交于
GUS Library This patch contains the following possible cleanups: - make needlesly global code static - #if 0 the following unused global functions: - gus/gus_volume.c: snd_gf1_gvol_to_lvol_raw - gus/gus_volume.c: snd_gf1_calc_ramp_rate - gus/gus_volume.c: snd_gf1_compute_vibrato - gus/gus_volume.c: snd_gf1_compute_pitchbend - gus/gus_volume.c: snd_gf1_compute_freq - gus/gus_io.c: snd_gf1_i_adlib_write - gus/gus_io.c: snd_gf1_i_write_addr - gus/gus_io.c: snd_gf1_pokew - gus/gus_io.c: snd_gf1_peekw - gus/gus_io.c: snd_gf1_dram_setmem - gus/gus_io.c: snd_gf1_print_global_registers - gus/gus_io.c: snd_gf1_print_setup_registers - gus/gus_io.c: snd_gf1_peek_print_block - gus/gus_io.c: snd_gf1_print_setup_registers - gus/gus_io.c: snd_gf1_peek_print_block - #if 0 the following unused global variable: - gus/gus_tables.h: snd_gf1_scale_table - remove the following unneeded EXPORT_SYMBOL's: - gus/gus_main.c: snd_gf1_i_write16 - gus/gus_main.c: snd_gf1_start - gus/gus_main.c: snd_gf1_stop Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 James Courtier-Dutton 提交于
CA0106 driver Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 James Courtier-Dutton 提交于
[ALSA] When the alsamixer says 'SPDIF Out [Off]', SPDIF output should be off and Analog output should be on. CA0106 driver This fixes a bug whereby when the snd-ca0106 module first loads, alsamixer says 'SPDIF Out [Off]' but no analog sound comes from the speakers. This covers any bug reports that said things like 'mixer fails to remember analog output on, when the system is rebooted.' Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 James Courtier-Dutton 提交于
CA0106 driver Notes: Requires updated alsa-lib. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Ville Syrjala 提交于
Maestro3 driver Add a hardware volume quirk list to the maestro3 driver. Details were taken from the Windows driver. Hardware volume control is enabled only for the systems in the list. Signed-off-by: NVille Syrjala <syrjala@sci.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
VIA82xx-modem driver Fix the resume of via82xx-modem, removing invalid __devinit. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Bunk 提交于
PCM Midlevel,ALSA Core,Timer Midlevel,ALSA sequencer,Virtual Midi This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global functions - remove the following unneeded EXPORT_SYMBOL's Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Benjamin Herrenschmidt 提交于
PPC PMAC driver The g5 support code broke some earlier models unfortunately as those bail out early from the detect function, before the point where I added the code to locate the PCI device for use with DMA allocations. This patch fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
PCM Midlevel Export snd_pcm_format_size(). This function is used by some out-of-kernel drivers. Make snd_pcm_format_cpu_endian() macro for optimization. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
AC97 Codec Fixed Mic/CLFE jack sharing on AD1985 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
USB generic driver When a device does not provide the bRefresh field in its audio endpoint descriptors, use the bInterval field instead. Furthermore, increase the number of sync URBs for better queueing. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver Many Roland USB MIDI devices have two interfaces that are currently not used by the driver; claim them anyway. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Jaroslav Kysela 提交于
Timer Midlevel - fixed traditional cut-n-paste error Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Timer Midlevel,ALSA Core Change values of some timer ioctls to avoid confliction with FIO* ioctls. The protocol version is increased to indicate this change. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Timer Midlevel Added the missing implemenation of TIMER PAUSE ioctl. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
AD1816A driver Added PnP ID 'ADS7180' (AD1816?). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Control Midlevel Suppress 'unknown ioctl' debug message (replaced with snd_printdd). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Added the missing vendor name entry for Analog Devices. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Allow 'Channel Mode' control to have more than 2 modes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Fixed a typo in the type of position_fix module option. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Suppressing the error message regarding no AFG. This is often harmless (e.g. probing a modem codec). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Bunk 提交于
CA0106 driver,HDA Codec driver This patch makes needlessly global code static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
AC97 Codec Removed the obsolete mixer control for AD1985. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
USB generic driver When a USB packet boundary falls exactly on a buffer boundary, hwptr remains at the end of the buffer which causes an overflow in the next iteration and triggers double buffering although the next packet would actually be contiguous. This patch ensures that hwptr is always smaller than buffer_size. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver Check that the synchronization feedback frequency values returned by the device are more or less near the nominal frequency. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
HDA Codec driver,HDA generic driver Renamed pci_vendor/pci_device fields to pci_subvendor/pci_subdevice. They are really PCI subsystem IDs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,HDA Intel driver Added the support of VIA VT8251/VT8237A HD-Audio controllers. They are (almost) compatible with Intel ICH6/7. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Frederick Li 提交于
Documentation,HDA Intel driver This patch changes the Intel HD Audio device driver to include the support of HD Audio device embedded in ATI south bridge IXP450. Because the design of ATI chipset follows intel HD Audio specification 1.0, the programming method is the same as that of intel HD Audio device exception one minor change which requires to enable snoop for DMA transport. There are 3 changes that have been made to hda_intel.c file. 1. Added device ID for ATI HD Audio device; 2. Increase maximum CODEC supported to 4; 3. Enable snoop during the driver initialization. Signed-off-by: NFrederick Li <fli@ati.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Added 'test' model for testing/debugging the devices with ALC880 codec. This model is built only when CONFIG_SND_DEBUG is set. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,HDA Codec driver Added the ASUS Z71V (or similar) laptop support. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,HDA Intel driver Added position_fix module option to HDA-intel driver for fixing up the DMA position (possibly hardware-) bugs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ville Syrjala 提交于
Maestro3 driver Some HP OmniBook laptops (500 and 6000 at least) require some GPIO magic before the HW volume buttons work. This patch makes them work mostly. Something is still missing to make them work perfectly. However I have been unable to figure out what exactly. Signed-off-by: NVille Syrjala <syrjala@sci.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ville Syrjala 提交于
Maestro3 driver Add support for hardware volume buttons. Signed-off-by: NVille Syrjala <syrjala@sci.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ville Syrjala 提交于
Maestro3 driver Due to a typo interrupts were never actually acked or disabled. Signed-off-by: NVille Syrjala <syrjala@sci.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Russell King 提交于
ARM,/arm/Makefile,ARM AACI PL041 driver Add support for the ARM AACI Primecell, which provides an AC'97 based interface. This driver only provides playback support. This has been extensively tested with an LM4549 AC'97 codec. Signed-off-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Russell King 提交于
ARM DMA routines The patch below adds a convenient re-usable shim around the extended ARM DMA API, and is used by several ARM ALSA drivers. Signed-off-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mikael Magnusson 提交于
EMU10K1/EMU10K2 driver The following patch adds SB0060 to emu_chip_details. Signed-off-by: NMikael Magnusson <mikaelmagnusson@glocalnet.net> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
USB generic driver Bind the device files to the (first) audio control interface instead of the entire USB device. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
AC97 Codec The code for AD1980/AD1985/AD1986 codecs forgot to enable the code to switch the jack sharing bits on AD1888-compatible codecs. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-