In the recent update, Fujitsu S7020 laptop with ALC260 codec lost the
speaker output, no matter how the amps and the pins are set.  After a
long debugging session, we found out that the default codec init code
is harmful for this machine, and we have to reset it to
ALC_INIT_NONE.
Reported-and-tested-by: NJonathan Woithe <jwoithe@just42.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These two machines have no mute LED string in BIOS.

BugLink: https://bugs.launchpad.net/bugs/1128934Tested-by: NTammy Yang <tammy.yang@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The problem addressed by this fixup is not specific to Vaio Z, affecting
some Vaio all-in-one desktop PCs too. Update the code comments accordingly.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by
the same issue that caused Vaio Z laptops to become silent: the speaker pin
must be connected to the first DAC even though the codec itself advertises
flexible routing through any of the DACs.

Use the no-primary-hp fixup for choosing the speaker pin as the primary so
that the right DAC is assigned on this device.

Cc: stable@vger.kernel.org
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch enables internal mic input on the machine.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1107477Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Using the new chained_before flag, we can correct the headphone jack
detection capability easily over the existing ALC880 6stack model
(which disables the jack detection intentionally for compatibility
reason).

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A Packard-Bell desktop machine gives no proper pin configuration from
BIOS.  It's almost equivalent with the 6stack+fp standard config, just
take the existing fixup.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The fixup function is called multiple times before parsing the pins,
so snd_BUG_ON() hits when loaded.  Move it to the proper place in the
if block.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since both snd_hda_codec_flush_amp_cache() and
snd_hda_codec_flush_cmd_cache() are called usually at the same time,
we can simply combine them to a single function,
snd_hda_codec_flush_cache().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Acer AO725 needs the same fixup as AO756.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some BIOS version of FSC Lifebook S7110 laptop seems to give a wrong
default pin config for NID 0x15, which confuses the parser.  Give a
fixup to correct the value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Two hooks in hda_gen_spec, cap_sync_hook and capture_switch_hook, play
very similar roles.  The only differences are that the former is
called more often (e.g. at init or switching capsrc) while the latter
can take an on/off argument.

As a more generic implementation, consolidate these two hooks, and
pass snd_ctl_elem_value pointer as the second argument.  If the
secondary argument is non-NULL, it can take the on/off value, so the
caller handles it like the former capture_switch_hook.  If it's NULL,
it's called in the init or capsrc switch case.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This machine also has the "HP_Mute_LED_0_A" string in DMI information.

Cc: <stable@vger.kernel.org>
BugLink: https://bugs.launchpad.net/bugs/1096789Tested-by: NTammy Yang <tammy.yang@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new flag to indicate whether HP amp is turned on as default for
speaker or line-outs, and enable this for ALC260 codec, as many
machines with this codec require the HP amp even for speakers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As David Henningsson recently suggested, some HP laptops use an unused
mic pin for controlling a mute LED, and this information is provided
via DMI string "HP_Mute_LED_X_Y" string.  This patch adds the generic
support for such cases, as we've already done in patch_sigmatel.c.
This is applied generically to all devices with ID 0x103c.

But as we don't know whether the device 103c:1586 really contains
HP_Mute_LED_X_Y DMI string, still keep the static setup for this
device using the mic2 pin 0x19.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some fixups such as setting the flags influencing on the parser
behavior should be applied before actually parsing the tree.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Try to recover from the regression: set the HP amp for the speaker and
add the hp jack mode enum as default.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new fixup type, HDA_FIXUP_PINCTLS, for overriding the pinctl
values of the given pins.  It takes the same array of struct pintbl
like HDA_FIXUP_PINS, but each entry contains the pinctl value instead
of the pin default config value.

This patch also replaces the corresponding codes in patch_realtek.c.
Without this change, the direct call of verbs may be overridden again
by the later call of pinctl restoration by the driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... instead of reading the value from the codec at each time.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now the whole codebase has been changed from the earlier kernels, it
makes little sense to keep these aliases.  Simply replace with the
official names.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just to remove duplicated codes.
Also fixed EXPORT_SYMBOL() in hda_generic.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a flag to indicate whether the vmaster mute hook enum is exposed
or not.  Conexant codecs may want not to expose the control depending
on the model.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It makes easier to understand although these are identical with
snd_hda_codec_resume_*() functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The inverted dmic fix overwrites the right channel amp value, but it
would work only when the amp values have been already actually
written.  Put snd_hda_codec_resume_amp() before the amp write for
flushing caches.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The next migration step is to use the common code in generic driver
for Realtek driver.  This is no drastic change and there should be no
real functional changes, as the generic parser code comes from Realtek
driver originally.

As Realtek driver requires the generic parser code, it needs a
reverse-selection of CONFIG_SND_HDA_GENERIC kconfig.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The argument "force" is always false in the recent code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch extends the capability of the auto-mic feature.
Instead of limiting the automatic input-source selection only to the
mics (internal, external and dock mics), allow it for generic inputs,
e.g. switching between the rear line-in and the front mic.

The logic is to check the attribute and location of input pins, and
enable the automatic selection feature only if all such pins are in
different locations (e.g. internal, front, rear, etc) and line-in or
mic pins.  That is, if multiple input pins are assigned to a single
location, the feature isn't enabled because we don't know the
priority.

(You may wonder why this restriction doesn't exist for the headphone
 automute.  The reason is that the output case is different from the
 input: the input source is an exclusive selection while the output
 can be multiplexed.)

Note that, for avoiding regressions, the line-in auto switching
feature isn't activated as default.  It has to be set explicitly via
spec->line_in_auto_switch flag in a fixup code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous commit passed an utterly wrong value for checking the
split inv dmic pin.  This patch fixes it and also tries to remove
inv_dmic_split_idx field.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the fixup code is used commonly, it's worth to move it to the
common place, struct hda_codec, instead of keeping in hda_gen_spec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

To make the parser more generic, a few codes to handle the inverted
stereo dmic in a way Conexant parser does is added in this patch.

The caller should set spec->inv_dmic_split flag appropriately.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far we create only "Capture Volume" and "Capture Switch" controls
for binding all possible amps, but we'd prefer creating individual
capture volume and switch controls per input in some cases
(e.g. conexant parser does it).

Add a new flag, spec->multi_cap_vol, to follow that policy.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This prevents stupid typos.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge a few functions that have been split due to historical reasons
to single functions.  Splitting too much (and placing too far away)
actually worsens the readability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are a few more cases where we can assign "Master" mixer element
safely, e.g. when a single DAC is used in the whole output paths.

Also, when vmaster hook is present, avoid "Master" but assign "PCM"
instead.  Otherwise vmaster hook won't work properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... so that the fixup just needs to set the hook function in
FIXUP_ACT_PROBE.  This will make easier to port for other codecs,
too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also arranged alc_spec definitions to optimize bit fields.
Use a bit field for spec->need_dac_fix, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This flag is superfluous now and it's always as same as
spec->auto_mic.  Let's drop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new field to indicate the possible pin NID for alternative vref
setup for the shared hp/mic.  Although 0x18 is valid for all Realtek
codecs, it'll be different on other vendor's codecs.

Also, drop the sanity check in update_shared_mic_hp() since the
reference pin is set explicitly in the caller side.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This was the last forgotten path.  Now it's parsed via the same path
parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>