The data read from the SKIPMAP registers is not immediately available
after writing and the driver panics when a packet is enqueued from the
interrupt handler. This patch adds an ndelay(195) before these registers
are read (delay value mentioned in section 15.1.1.3 of the ISP1760 data
sheet).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When an USB hardware does not provide a valid LANGID, fall back to value
zero which is still a reasonable default for most devices.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is a merge of patches :
 - fix function doc and debug
 - cleanup loop count
 - optimize code to remove local variable and extra check
 - init 'req' before use
 - add missing iounmap call

[dbrownell@users.sourceforge.net: capitalize IN/OUT directions in doc]
Signed-off-by: NVernon Sauder <vsauder@inhand.com>
[folded by Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use the new device-level suspend/resume hooks for Gadget Zero;
always enable them with the OTG test mode; and support remote
wakeup on both configurations even in non-OTG mode.

This ensures that both configurations can pass the USBCV remote
wakeup tests when the OTG test mode is enabled.  This changes
behavior by adding autoresume support to the loopback config
even in non-OTG mode; the test failure was that it didn't work
in OTG mode.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Address one open question in the composite gadget framework:
Yes, we should have device-level suspend/resume callbacks
in addition to the function-level ones.  We have at least one
scenario (with gadget zero in OTG test mode) that's awkward
to handle without it.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the problem that system cannot suspend.
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

transfer_buffer_length and actual_length have become unsigned, therefore some
additional conversion of local variables, function arguments and print
specifications is desired.

A test for a negative urb->transfer_buffer_length became obsolete; instead
we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always
less than urb->transfer_buffer_length.

rh_string() does no longer return -EPIPE in the case of an unsupported ID.
Instead its only caller, rh_call_control() does the check.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is really a follow up to the modifications Alan Cox made for commit
95da310e to pass a tty_struct to various
interface functions, which broke the serial configuration (termios) functions
when the device is being used as a console. These changes restore the
configuration to proper functioning both as a tty and as a console.  As Alan
notes in that commit, these changes will need to be tweaked when we have
a proper console abstraction.
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

One new device ID for CP2101 driver.

Signed-off-by: Alex Stephens alex@miranova.com

The ipaq driver currently enforces one port on all devices. This
is correct for 2 and 3 endpoint devices, but with 4 endpoint devices
meaningful communication occurs on the second pair.

This patch allows 2 ports for 4 endpoint devices.
Signed-off-by: NMark Ellis <mark@mpellis.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX
architectures, so move it to <plat/usb-control.h>
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The ohci-s3c2410.c glue supports both CONFIG_ARCH_S3C2410 and
CONFIG_ARCH_S3C64XX so add it to the build of ohci-s3c2410.c
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Just noticed this during a grep, figured I might as well send it in.

From: D.J. Capelis <dev@capelis.dj>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix this sparse warning:
 drivers/usb/host/oxu210hp-hcd.c:2687:42: warning: Using plain integer as NULL pointer
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The USB bus clock is usb-bus-host, so print the correct name in the
dev_err() statement if we cannot find it.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>

Remove the include of <mach/hardware.h>, as no definitions
from it are used by the OHCI driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lots of users are getting confused about the cp2101 driver.  It really
does support more than just the cp2101 device, so rename it to cp210x to
try to prevent confusion.

Cc: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch lowers the logging priority of certain messages to prevent
users from flooding the log files.
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the extended range of baud rates supported
by CP2102 and CP2103 devices described in SiLabs AN205.  An additional
function cp2101_quantise_baudrate rounds the baud rate as per AN205
Table 1.  A modification to the baud rate calculation removes a rounding
error, allowing the full range of baud rates to be used.
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use kzfree() instead of memset() + kfree().
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1223) removes a bunch of unnecessary "inline"
annotations from the usbfs driver.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1221) changes the way usbcore reinitializes a device
following a reset or a reset-resume.  Currently we call
usb_set_interface() for every interface in the active configuration;
this is to put the interface into the same altsetting as before the
reset and to make sure that the host's endpoint state matches the
device's endpoint state.

However, sending a Set-Interface request is a waste of time if an
interface was already in altsetting 0 before the reset, since it is
certainly in altsetting 0 afterward.  In addition, many devices can't
handle Set-Interface requests -- they crash when they receive them.

So instead, the patch adds code to check each interface.  If the
interface wasn't in altsetting 0 before the reset, we go head with the
Set-Interface request as before.  But if it was then we skip sending
the Set-Interface request, and we clear out the host-side endpoint
state by calling usb_disable_interface() followed by
usb_enable_interface().

The patch also adds a couple of new comments to explain what's going
on.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These devices are better controlled with the LGPL userspace library
found at:
	http://www.phidgets.com/downloads.php?os_id=3
and full documentation at:
	http://www.phidgets.com/documentation/web/cdoc/index.html

Cc: Chester Fitchett <fitchett@phidgets.com>
Acked-by: NSean Young <sean@mess.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

actual_length should also be a u32 and not a signed value.  This patch
changes this field to be 'u32' to prevent any potential negative
conversion and comparison errors.

This triggered a few compiler warning messages when these fields were
being used with the min macro, so they have also been fixed up in this
patch.

Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Roel Kluin pointed out that transfer_buffer_lengths in struct urb was
declared as an 'int'.  This patch changes this field to be 'u32' to
prevent any potential negative conversion and comparison errors.

This triggered a few compiler warning messages when these fields were
being used with the min macro, so they have also been fixed up in this
patch.

Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The code in uhci-q.c doesn't have to use pseudo-negative values.  I did
it that way because it was easy and because it would give the expected
output during debugging.  But it doesn't have to work that way.  Here's
another approach.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1
when the USB cable is unplugged to reduce power consumption.
Added a depencency from twl4030 usb driver to TWL_REGULATOR.
Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds an extension to the binary API so it reaches parity with
existing text API (so-called "1u"). The extension delivers additional data,
such as ISO descriptors and the interrupt interval.
Signed-Off-By: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the following bug:
	.plug ch341 usb serial port into a hub port;
	.ch341 driver bound to the device and /dev/ttyUSB0 comes
	.open /dev/ttyUSB0 by minicom and we can use the serial successfully
	.suspend the ch341 usb serial device(such as: echo suspend > power/level)
	.resume the ch341 usb serial device (such as: echo on > power/level)
	.new port /dev/ttyUSB1 comes ,and the original /dev/ttyUSB0 still exists,
but is no longer usable by minicom

The patch adds suspend and resume callback to ch341 usb driver to prevent it
from unbinding during suspend. The /dev/ttyUSB0 is not released until being
closed, so /dev/ttyUSB1 comes after resume, and the original /dev/ttyUSB0 is
no longer usable by minicom. It is really a mess for a minicom user.

This patch also adds the reset_resume callback to make it usable after resuming
from STR or hibernation, for generally STR or hibernation will make the vbus
of root-hub lost.

Finally enable the driver's supports_autosuspend, for the device is in working
order with it.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Partial support for DaVinci DM355, on the EVM board; peripheral
mode should work, once mainline merges DM355 support.  Missing:

  (a) renumbering the GPIO for DRVVBUS on the DM6446 EVM,
      when DAVINCI_N_GPIO increases;

  (b) disabling DM355_DEEPSLEEP.DRVVBUS_OVERRIDE so VBUS is
      driven according to the ID signal, if cpu_is_..._dm355()

The new PHY control bits are ignored on DM6446.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Except on DaVinci, VBUS is now switched off as part of idling the
USB link (after a_wait_bcon) whenever a device is disconnected
from host.  This is correct for OTG hosts, where either SRP or
an ID interrupt could turn VBUS on again.

However, for non-OTG hosts there's no way to turn VBUS on again,
so the host becomes unusable.  And the procfs entry which once
allowed a manual workaround for this is now gone.

This patch adds an is_otg_enabled() check before scheduling the
switch-off timer in disconnect path, supporting a "classic host"
mode where SRP is unavailable.

[ dbrownell@users.sourceforge.net: tweak patch description ]
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Correct musb_read_fifosize() and musb_configure_ep0() functions
for the #ifndef BLACKFIN branch when the silicon uses static FIFO
configuration.  (Most current silicon configures this controller
to use dynamic FIFO configuration; some parts from ST don't, like
the STM STA2062.)
Signed-off-by: NGiuseppe	GORGOGLIONE <giuseppe.gorgoglione@st.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes endpoint starvation issue when more than one bulk QH is
multiplexed on the reserved bulk RX endpoint, which is normal
for cases like serial and ethernet adapters.

This patch sets the NAK timeout interval for such QHs, and when
a timeout triggers the next QH will be scheduled.  (This resembles
the bulk scheduling done in hardware by EHCI, OHCI, and UHCI.)

This scheme doesn't work for devices which are connected to a
high to full speed tree (transaction translator) as there is
no NAK timeout interrupt from the musb controller from such
devices.

Tested with PIO, Inventra DMA, CPPI DMA.

[ dbrownell@users.sourceforge.net:  fold in start_urb() update;
  clarify only for bulk RX; don't accidentally clear WZC bits ]
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current MUSB host code doesn't make use of all the available
FIFOs in for periodic transfers since it wrongly assumes the RX
and TX sides of any given hw_ep always share one FIFO.

Change:  use 'in_qh' and 'out_qh' fields of the 'struct musb_hw_ep'
to check the endpoint's business; get rid of the now-unused 'periodic'
array in the 'struct musb'.  Also optimize a loop induction variable
in the endpoint lookup code.

(Based on a previous patch from Ajay Kumar Gupta <ajay.gupta@ti.com>)

[ dbrownell@users.sourceforge.net: clarify description and origin
  of this fix; whitespace ]
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Avoid the following INFO from lock debugging:

[  369.126112] =================================
[  369.132063] [ INFO: inconsistent lock state ]
[  369.136457] 2.6.28-maemo1 #1
[  369.139387] ---------------------------------
[  369.143782] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
[  369.149855] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[  369.154890]  (&cdev->lock){+-..}, at: [<bf1979f0>] composite_disconnect+0x1c/0]
[  369.163404] {hardirq-on-W} state was registered at:
[  369.168348]   [<c00788a8>] __lock_acquire+0x5d0/0x7d8
[  369.173506]   [<c0078b14>] lock_acquire+0x64/0x78
[  369.178266]   [<c0263a34>] _spin_lock+0x4c/0x80
[  369.182905]   [<bf19597c>] usb_function_deactivate+0x20/0x70 [g_nokia]
[  369.189527]   [<bf1a0a88>] 0xbf1a0a88
[  369.193281]   [<bf19f450>] 0xbf19f450
[  369.197004]   [<bf19fa3c>] 0xbf19fa3c
[  369.200758]   [<bf1a03a0>] 0xbf1a03a0
[  369.204481]   [<bf19f254>] 0xbf19f254
[  369.208204]   [<bf1a0158>] 0xbf1a0158
[  369.211927]   [<bf1a130c>] 0xbf1a130c
[  369.215650]   [<c01c21f0>] usb_gadget_register_driver+0x12c/0x28c
[  369.221846]   [<bf1a06bc>] 0xbf1a06bc
[  369.225569]   [<bf1a06e8>] 0xbf1a06e8
[  369.229322]   [<c002c2dc>] __exception_text_end+0x64/0x19c
[  369.234877]   [<c0081628>] sys_init_module+0x9c/0x194
[  369.240004]   [<c002c8e0>] ret_fast_syscall+0x0/0x2c
[  369.245039]   [<ffffffff>] 0xffffffff
[  369.248793] irq event stamp: 218356
[  369.252302] hardirqs last  enabled at (218355): [<c003a77c>] omap3_enter_idle+8
[  369.260420] hardirqs last disabled at (218356): [<c0264774>] __irq_svc+0x34/0x0
[  369.267927] softirqs last  enabled at (218348): [<c00585a4>] __do_softirq+0x134
[  369.275892] softirqs last disabled at (218335): [<c005899c>] irq_exit+0x60/0xb0
[  369.283308]
[  369.283308] other info that might help us debug this:
[  369.289930] no locks held by swapper/0.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

To permit a userspace application to associate with WUSB devices
using numeric association, control transfers to unauthenticated WUSB
devices must be allowed.

This requires that wusbcore correctly sets the device state to
UNAUTHENTICATED, DEFAULT and ADDRESS and that control transfers can be
performed to UNAUTHENTICATED devices.
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The lack of a MODULE_LICENSE macro in ums-* subdrivers prevented them
from loading. Needs to be applied after Alan Stern's usb-storage
subdriver separation patchset. Also added missing MODULE_DESCRIPTION and
MODULE_AUTHOR entries.
Signed-off-by: NMaciej Grela <maciej.grela@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1217) converts usb-storage's onetouch subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1216) converts usb-storage's karma subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1215) converts usb-storage's alauda subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>