Everytime we write out dirty pages we search for an offset in the tree,
convert the bits in the state, and then when we wait we search for the
offset again and clear the bits.  So for every dirty range in the io tree we
are doing 4 rb searches, which is suboptimal.  With this patch we are only
doing 2 searches for every cycle (modulo weird things happening).  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

nocow_only is now an obsolete argument.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

btrfs_iget() never return NULL.
So, NULL check is unnecessary.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>

Sometimes we need choose the method of the reservation according to the type
of the block reservation, such as the reservation for the delayed inode update.
Now we identify the type just by comparing the address of the reservation
variants, it is very ugly if it is a temporary one because we need compare it
with all the common reservation variants. So we add a new "type" field to keep
the type the reservation variants.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

Use the generic printk_get_level() to search a message for a kern_level.

Add __printf to verify format and arguments.  Fix a few messages that
had mismatches in format and arguments.  Add #ifdef CONFIG_PRINTK blocks
to shrink the object size a bit when not using printk.

[akpm@linux-foundation.org: whitespace tweak]
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We dereferenced "node" in the error message after freeing it.  Also
btrfs_panic() can return so we should return an error code instead of
continuing.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>

Fix out-of-space checking, addressing a warning and potential resource
leak when resizing the filesystem down while allocating blocks.
Signed-off-by: NDaniel J Blueman <daniel@quora.org>
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

I was seeing root_list corruption on unmount during fs resize in 3.4-rc4; add
correct locking to address this.
Signed-off-by: NDaniel J Blueman <daniel@quora.org>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

 btrfs currently handles most errors with BUG_ON. This patch is a work-in-
 progress but aims to handle most errors other than internal logic
 errors and ENOMEM more gracefully.

 This iteration prevents most crashes but can run into lockups with
 the page lock on occasion when the timing "works out."
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>

Commit cb1b69f4 (Btrfs: forced readonly when btrfs_drop_snapshot() fails)
made btrfs_drop_snapshot return void because there were no callers checking
the return value. That is the wrong order to handle error propogation since
the caller will have no idea that an error has occured and continue on
as if nothing went wrong.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

 lock_extent and unlock_extent are always called with GFP_NOFS, drop the
 argument and use GFP_NOFS consistently.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

This patch pushes kmalloc errors up to the caller and BUGs in the caller.

The BUG_ON for duplicate reloc tree root insertion is replaced with a
panic explaining the issue.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

The ordered data and relocation trees have BUG_ONs to protect against
bad tree operations.

This patch replaces them with a panic that will report the problem.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

I was using i_mutex for this, but we're getting bogus lockdep warnings by doing
that and theres no real way to get rid of those, so just stop using i_mutex to
protect delalloc metadata reservations and use a delalloc mutex instead.  This
shouldn't be contended often at all, only if you are writing and mmap writing to
the file at the same time.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Add a for_cow parameter to add_delayed_*_ref and pass the appropriate value
from every call site. The for_cow parameter will later on be used to
determine if a ref will change anything with respect to qgroups.

Delayed refs coming from relocation are always counted as for_cow, as they
don't change subvol quota.

Also pass in the fs_info for later use.

btrfs_find_all_roots() will use this as an optimization, as changes that are
for_cow will not change anything with respect to which root points to a
certain leaf. Thus, we don't need to add the current sequence number to
those delayed refs.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Running xfstests 269 with some tracing my scripts kept spitting out errors about
releasing bytes that we didn't actually have reserved.  This took me down a huge
rabbit hole and it turns out the way we deal with reserved_extents is wrong,
we need to only be setting it if the reservation succeeds, otherwise the free()
method will come in and unreserve space that isn't actually reserved yet, which
can lead to other warnings and such.  The math was all working out right in the
end, but it caused all sorts of other issues in addition to making my scripts
yell and scream and generally make it impossible for me to track down the
original issue I was looking for.  The other problem is with our error handling
in the reservation code.  There are two cases that we need to deal with

1) We raced with free.  In this case free won't free anything because csum_bytes
is modified before we dro the lock in our reservation path, so free rightly
doesn't release any space because the reservation code may be depending on that
reservation.  However if we fail, we need the reservation side to do the free at
that point since that space is no longer in use.  So as it stands the code was
doing this fine and it worked out, except in case #2

2) We don't race with free.  Nobody comes in and changes anything, and our
reservation fails.  In this case we didn't reserve anything anyway and we just
need to clean up csum_bytes but not free anything.  So we keep track of
csum_bytes before we drop the lock and if it hasn't changed we know we can just
decrement csum_bytes and carry on.

Because of the case where we can race with free()'s since we have to drop our
spin_lock to do the reservation, I'm going to serialize all reservations with
the i_mutex.  We already get this for free in the heavy use paths, truncate and
file write all hold the i_mutex, just needed to add it to page_mkwrite and
various ioctl/balance things.  With this patch my space leak scripts no longer
scream bloody murder.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

If the root node of a fs/file tree is in the block group that is
being relocated, but the others are not in the other block groups.
when we create a snapshot for this tree between the relocation tree
creation ends and ->create_reloc_tree is set to 0, Btrfs will create
some backref nodes that are the lowest nodes of the backrefs cache.
But we forget to add them into ->leaves list of the backref cache
and deal with them, and at last, they will triggered BUG_ON().

  kernel BUG at fs/btrfs/relocation.c:239!

This patch fixes it by adding them into ->leaves list of backref cache.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Offset field in data extent backref can underflow if clone range ioctl
is used. We can reliably detect the underflow because max file size is
limited to 2^63 and max data extent size is limited by block group size.
Signed-off-by: NZheng Yan  <zheng.z.yan@intel.com>

Currently btrfs_block_rsv_check does 2 things, it will either refill a block
reserve like in the truncate or refill case, or it will check to see if there is
enough space in the global reserve and possibly refill it.  However because of
overcommit we could be well overcommitting ourselves just to try and refill the
global reserve, when really we should just be committing the transaction.  So
breack this out into btrfs_block_rsv_refill and btrfs_block_rsv_check.  Refill
will try to reserve more metadata if it can and btrfs_block_rsv_check will not,
it will only tell you if the factor of the total space is still reserved.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Johannes pointed out we were allocating only kernel pages for doing writes,
which is kind of a big deal if you are on 32bit and have more than a gig of ram.
So fix our allocations to use the mapping's gfp but still clear __GFP_FS so we
don't re-enter.  Thanks,
Reported-by: NJohannes Weiner <jweiner@redhat.com>
Signed-off-by: NJosef Bacik <josef@redhat.com>

The only thing that we need to have a trans handle for is in
reserve_metadata_bytes and thats to know how much flushing we can do.  So
instead of passing it around, just check current->journal_info for a
trans_handle so we know if we can commit a transaction to try and free up space
or not.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

If you run xfstest 224 it you will get lots of messages about not being able to
delete inodes and that they will be cleaned up next mount.  This is because
btrfs_block_rsv_check was not calling reserve_metadata_bytes with the ability to
flush, so if there was not enough space, it simply failed.  But in truncate and
evict case we could easily flush space to try and get enough space to do our
work, so make btrfs_block_rsv_check take a flush argument to pass down to
reserve_metadata_bytes.  Now xfstests 224 runs fine without all those
complaints.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

The priority and refill_used flags are not used anymore, and neither is the
usage counter, so just remove them from btrfs_block_rsv.
Signed-off-by: NJosef Bacik <josef@redhat.com>

This is confusing code and isn't used by anything anymore, so delete it.
Signed-off-by: NJosef Bacik <josef@redhat.com>

grab_cache_page will use mapping_gfp_mask(), which for all inodes is set to
GFP_HIGHUSER_MOVABLE.  So instead use find_or_create_page in all cases where we
need GFP_NOFS so we don't deadlock.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

The recent commit to get rid of our trans_mutex introduced
some races with block group relocation.  The problem is that relocation
needs to do some record keeping about each root, and it was relying
on the transaction mutex to coordinate things in subtle ways.

This fix adds a mutex just for the relocation code and makes sure
it doesn't have a big impact on normal operations.  The race is
really fixed in btrfs_record_root_in_trans, which is where we
step back and wait for the relocation code to finish accounting
setup.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Our readahead is sort of sloppy, and really isn't always needed.  For example if
ls is doing a stating ls (which is the default) it's going to stat in non-disk
order, so if say you have a directory with a stupid amount of files, readahead
is going to do nothing but waste time in the case of doing the stat.  Taking the
unconditional readahead out made my test go from 57 minutes to 36 minutes.  This
means that everywhere we do loop through the tree we want to make sure we do set
path->reada properly, so I went through and found all of the places where we
loop through the path and set reada to 1.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

We use trans_mutex for lots of things, here's a basic list

1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists

Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction.  So replace the
trans_mutex with a trans_lock spinlock and use it to do the following

1) Protect fs_info->running_transaction.  All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list.  This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list.  This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff.  This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join.  Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work.  So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.

I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

I keep forgetting that btrfs_join_transaction() just ignores the num_items
argument, which leads me to sending pointless patches and looking stupid :).  So
just kill the num_items argument from btrfs_join_transaction and
btrfs_start_ioctl_transaction, since neither of them use it.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

This adds an initial implementation for scrub. It works quite
straightforward. The usermode issues an ioctl for each device in the
fs. For each device, it enumerates the allocated device chunks. For
each chunk, the contained extents are enumerated and the data checksums
fetched. The extents are read sequentially and the checksums verified.
If an error occurs (checksum or EIO), a good copy is searched for. If
one is found, the bad copy will be rewritten.
All enumerations happen from the commit roots. During a transaction
commit, the scrubs get paused and afterwards continue from the new
roots.

This commit is based on the series originally posted to linux-btrfs
with some improvements that resulted from comments from David Sterba,
Ilya Dryomov and Jan Schmidt.
Signed-off-by: NArne Jansen <sensille@gmx.net>

- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

parameter tree root it's not used since commit
5f39d397 ("Btrfs: Create extent_buffer
interface for large blocksizes")
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

pass GFP_NOFS directly to kmem_cache_alloc
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

all callers pass GFP_NOFS, but the GFP mask argument is not used in the
function; GFP_ATOMIC is passed to radix tree initialization and it's the
only correct one, since we're using the preload/insert mechanism of
radix tree.
Let's drop the gfp mask from btrfs function, this will not change
behaviour.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

use IS_ERR_OR_NULL when possible, done by this coccinelle script:

@ match @
identifier id;
@@
(
- BUG_ON(IS_ERR(id) || !id);
+ BUG_ON(IS_ERR_OR_NULL(id));
|
- IS_ERR(id) || !id
+ IS_ERR_OR_NULL(id)
|
- !id || IS_ERR(id)
+ IS_ERR_OR_NULL(id)
)
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

There's a potential problem in 32bit system when we exhaust 32bit inode
numbers and start to allocate big inode numbers, because btrfs uses
inode->i_ino in many places.

So here we always use BTRFS_I(inode)->location.objectid, which is an
u64 variable.

There are 2 exceptions that BTRFS_I(inode)->location.objectid !=
inode->i_ino: the btree inode (0 vs 1) and empty subvol dirs (256 vs 2),
and inode->i_ino will be used in those cases.

Another reason to make this change is I'm going to use a special inode
to save free ino cache, and the inode number must be > (u64)-256.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Currently btrfs stores the highest objectid of the fs tree, and it always
returns (highest+1) inode number when we create a file, so inode numbers
won't be reclaimed when we delete files, so we'll run out of inode numbers
as we keep create/delete files in 32bits machines.

This fixes it, and it works similarly to how we cache free space in block
cgroups.

We start a kernel thread to read the file tree. By scanning inode items,
we know which chunks of inode numbers are free, and we cache them in
an rb-tree.

Because we are searching the commit root, we have to carefully handle the
cross-transaction case.

The rb-tree is a hybrid extent+bitmap tree, so if we have too many small
chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram
of extents, and a bitmap will be used if we exceed this threshold. The
extents threshold is adjusted in runtime.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>