Steven Rostedt <rostedt@goodmis.org> points out that `rsv' here is usually
NULL, so we should avoid calling kfree().

Also, fix up some nearby whitespace damage.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.

This complements the get_sb() patch.  That reduced the significance of
sb->s_root, allowing NFS to place a fake root there.  However, NFS does
require a dentry to use as a target for the statfs operation.  This permits
the root in the vfsmount to be used instead.

linux/mount.h has been added where necessary to make allyesconfig build
successfully.

Interest has also been expressed for use with the FUSE and XFS filesystems.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.

The filesystem is then required to manually set the superblock and root dentry
pointers.  For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).

The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.

This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing.  In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.

The patch also makes the following changes:

 (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
     pointer argument and return an integer, so most filesystems have to change
     very little.

 (*) If one of the convenience function is not used, then get_sb() should
     normally call simple_set_mnt() to instantiate the vfsmount. This will
     always return 0, and so can be tail-called from get_sb().

 (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
     dcache upon superblock destruction rather than shrink_dcache_anon().

     This is required because the superblock may now have multiple trees that
     aren't actually bound to s_root, but that still need to be cleaned up. The
     currently called functions assume that the whole tree is rooted at s_root,
     and that anonymous dentries are not the roots of trees which results in
     dentries being left unculled.

     However, with the way NFS superblock sharing are currently set to be
     implemented, these assumptions are violated: the root of the filesystem is
     simply a dummy dentry and inode (the real inode for '/' may well be
     inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
     with child trees.

     [*] Anonymous until discovered from another tree.

 (*) The documentation has been adjusted, including the additional bit of
     changing ext2_* into foo_* in the documentation.

[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is no valid reason why we can't support "nobh" option for filesystems
with blocksize != PAGESIZE.

This patch lets them use "nobh" option for writeback mode for blocksize <
pagesize.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Under I/O load it may take up to a dozen seconds to read all group
descriptors.  This is what ext3_statfs() does.  At the same time, we already
maintain global numbers of free inodes/blocks.  Why don't we use them instead
of group reading and summing?

Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD.  This patch
contains only formatting changes, and no function change.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.

If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.

The following inode and similar caches are marked SLAB_MEM_SPREAD:

    file                               cache
    ====                               =====
    fs/adfs/super.c                    adfs_inode_cache
    fs/affs/super.c                    affs_inode_cache
    fs/befs/linuxvfs.c                 befs_inode_cache
    fs/bfs/inode.c                     bfs_inode_cache
    fs/block_dev.c                     bdev_cache
    fs/cifs/cifsfs.c                   cifs_inode_cache
    fs/coda/inode.c                    coda_inode_cache
    fs/dquot.c                         dquot
    fs/efs/super.c                     efs_inode_cache
    fs/ext2/super.c                    ext2_inode_cache
    fs/ext2/xattr.c (fs/mbcache.c)     ext2_xattr
    fs/ext3/super.c                    ext3_inode_cache
    fs/ext3/xattr.c (fs/mbcache.c)     ext3_xattr
    fs/fat/cache.c                     fat_cache
    fs/fat/inode.c                     fat_inode_cache
    fs/freevxfs/vxfs_super.c           vxfs_inode
    fs/hpfs/super.c                    hpfs_inode_cache
    fs/isofs/inode.c                   isofs_inode_cache
    fs/jffs/inode-v23.c                jffs_fm
    fs/jffs2/super.c                   jffs2_i
    fs/jfs/super.c                     jfs_ip
    fs/minix/inode.c                   minix_inode_cache
    fs/ncpfs/inode.c                   ncp_inode_cache
    fs/nfs/direct.c                    nfs_direct_cache
    fs/nfs/inode.c                     nfs_inode_cache
    fs/ntfs/super.c                    ntfs_big_inode_cache_name
    fs/ntfs/super.c                    ntfs_inode_cache
    fs/ocfs2/dlm/dlmfs.c               dlmfs_inode_cache
    fs/ocfs2/super.c                   ocfs2_inode_cache
    fs/proc/inode.c                    proc_inode_cache
    fs/qnx4/inode.c                    qnx4_inode_cache
    fs/reiserfs/super.c                reiser_inode_cache
    fs/romfs/inode.c                   romfs_inode_cache
    fs/smbfs/inode.c                   smb_inode_cache
    fs/sysv/inode.c                    sysv_inode_cache
    fs/udf/super.c                     udf_inode_cache
    fs/ufs/super.c                     ufs_inode_cache
    net/socket.c                       sock_inode_cache
    net/sunrpc/rpc_pipe.c              rpc_inode_cache

The choice of which slab caches to so mark was quite simple.  I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch.  Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.

Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ext3's truncate_sem is always released in the same function it's taken
and it otherwise is a mutex as well..
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts the superblock-lock semaphore to a mutex, affecting
lock_super()/unlock_super(). Tested on ext3 and XFS.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: NIngo Molnar <mingo@elte.hu>

(finished the conversion)
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The patch below adds a new mount option to allow the external journal
device to be specified.

The syntax is as follows:
# mount -t ext3 -o journal_dev=0x0820 ...
where 0x0820 means major=8 and minor=32.
Signed-off-by: NJohann Lombardi <johann.lombardi@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The CONFIG_EXT{2,3}_CHECK options where were never available, and all they
did was to implement a subset of e2fsck in the kernel.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix warnings from sparse due to un-declared functions that should either
have a header file or have been declared static

 fs/ext2/bitmap.c:14:15: warning: symbol 'ext2_count_free' was not declared. Should it be static?
 fs/ext2/namei.c:92:15: warning: symbol 'ext2_get_parent' was not declared. Should it be static?
 fs/ext3/bitmap.c:15:15: warning: symbol 'ext3_count_free' was not declared. Should it be static?
 fs/ext3/namei.c:1013:15: warning: symbol 'ext3_get_parent' was not declared. Should it be static?
 fs/ext3/xattr.c:214:1: warning: symbol 'ext3_xattr_block_get' was not declared. Should it be static?
 fs/ext3/xattr.c:358:1: warning: symbol 'ext3_xattr_block_list' was not declared. Should it be static?
 fs/ext3/xattr.c:630:1: warning: symbol 'ext3_xattr_block_find' was not declared. Should it be static?
 fs/ext3/xattr.c:863:1: warning: symbol 'ext3_xattr_ibody_find' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix compile warning in ext3 quota code.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

EXT3_MOUNT_DATA_FLAGS is not a boolean. This fixes it.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If /etc/mtab is a regular file all of the mount options (of a file system)
are written to /etc/mtab by the mount command.  The quota tools look there
for the quota strings for their operation.  If, however, /etc/mtab is a
symlink to /proc/mounts (a "good thing" in some environments) the tools
don't write anything - they assume the kernel will take care of things.

While the quota options are sent down to the kernel via the mount system
call and the file system codes handle them properly unfortunately there is
no code to echo the quota strings into /proc/mounts and the quota tools
fail in the symlink case.

The attached patchs modify the EXT[2|3] and JFS codes to add the necessary
hooks.  The show_options function of each file system in these patches
currently deal with only those things that seemed related to quotas;
especially in the EXT3 case more can be done (later?).

Jan Kara also noted the difficulty in moving these changes above the FS
codes responding similarly to myself to Andrew's comment about possible
VFS migration. Issue summary:

 - FS codes have to process the entire string of options anyway.

 - Only FS codes that use quotas must have a show_options function (for
   quotas to work properly) however quotas are only used in a small number
   of FS.

 - Since most of the quota using FS support other options these FS codes
   should have the a show_options function to show those options - and the
   quota echoing becomes virtually negligible.

Based on feedback I have modified my patches from the original:

   JFS a missing patch has been restored to the posting
   EXT[2|3] and JFS always use the show_options function
       - Each FS has at least one FS specific option displayed
       - QUOTA output is under a CONFIG_QUOTA ifdef
       - a follow-on patch will add a multitude of options for each FS
   EXT[2|3] and JFS "quota" is treated as "usrquota"
   EXT3 journalled data check for journalled quota removed
   EXT[2|3] mount when quota specified but not compiled in

 - no changes from my original patch.  I tested the patch and the codes
   warn but

 - still mount.  With all due respection I believe the comments
   otherwise were a

 - misread of the patch.  Please reread/test and comment.  XFS patch
   removed - the XFS team already made the necessary changes EXT3 mixing
   old and new quotas are handled differently (not purely exclusive)

 - if old and new quotas for the same type are used together the old
   type is silently depricated for compatability (e.g.  usrquota and
   usrjquota)

 - mixing of old and new quotas is an error (e.g.  usrjquota and
   grpquota)
Signed-off-by: NMark Bellon <mbellon@mvista.com>
Acked-by: NDave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a problem with ext3 mount option parsing.  When remount of a filesystem
fails, old options are now restored.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The return value of  "match_int" is  checked  27 out of 28 times

In lib/parser.c
142  	/**
143  	 * match_int: - scan a decimal representation of an integer from a substring_t
144  	 * @s: substring_t to be scanned
145  	 * @result: resulting integer on success
146  	 *
147  	 * Description: Attempts to parse the &substring_t @s as a decimal integer. On
148  	 * success, sets @result to the integer represented by the string and returns 0.
149  	 * Returns either -ENOMEM or -EINVAL on failure.
150  	 */
151  	int match_int(substring_t *s, int *result)
152  	{
153  		return match_number(s, result, 0);
154  	}
Signed-off-by: NZaur Kambarov <zkambarov@coverity.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use improved credits estimates for quota operations.  Also reserve a space
for a quota operation in a transaction only if filesystem was mounted with
some quota options.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move some code duplicated in both callers into vfs_quota_on_mount
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid console spam with ext3 aborted journal.

ext3 usually reports error conditions that it detects in its environment.
But when its journal gets aborted due to such errors, it can sometimes
continue to report that condition forever, spamming the console to such
an extent that the initial first cause of the journal abort can be lost.

When the journal aborts, we put the filesystem into readonly mode.  Most
subsequent filesystem operations will get rejected immediately by checks
for MS_RDONLY either in the filesystem or in the VFS.  But some paths do
not have such checks --- for example, if we continue to write to a file
handle that was opened before the fs went readonly.  (We only check for
the ROFS condition when the file is first opened.)  In these cases, we
can continue to generate log errors similar to

EXT3-fs error (device $DEV) in start_transaction: Journal has aborted

for each subsequent write.

There is really no point in generating these errors after the initial
error has been fully reported.  Specifically, if we're starting a
completely new filesystem operation, and the filesystem is *already*
readonly (ie. the ext3 layer has already detected and handled the
underlying jbd abort), and we see an EROFS error, then there is simply
no point in reporting it again.
Signed-off-by: NStephen Tweedie <sct@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!