The clock spreading disable/enable code was called to late/early during
the suspend/resume code on some laptops and would trigger a
might_sleep() warning due to the down() call in the low level i2c code.

This fixes it by calling those functions earlier/later when interrupts
are still enabled.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch moves the IRQ-related SA_xxx flags (namely, SA_PROBE,
SA_SAMPLE_RANDOM and SA_SHIRQ) from all the arch-specific headers to
linux/signal.h.  This looks like a left-over after the irq-handling code
was consolidated.  The code was moved to kernel/irq/*, but the flags are
still left per-arch.

Right now, adding a new IRQ flag to the arch-specific header, like this
patch does:
http://cvs.sourceforge.net/viewcvs.py/*checkout*/alsa/alsa-driver/utils/patches/pcsp-kernel-2.6.10-03.diff?rev=1.1
no longer works, it breaks the compilation for all other arches, unless you
add that flag to all the other arch-specific headers too.  So I think such
a clean-up makes sense.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch eliminates all kernel BUGs, trims about 35k off the typical
kernel, and makes the system slightly faster.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Moved common FPU exception handling code out of head.S so it can be used by
several of the sub-architectures that might of a full PowerPC FPU.

Also, uses new CONFIG_PPC_FPU define to fix alignment exception handling
for floating point load/store instructions to only occur if we have a
hardware FPU.
Signed-off-by: NJason McMullan <jason.mcmullan@timesys.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* ->io_base_virt in struct pci_controller is iomem pointer.  Marked as such.
  Most of the places that used it are already annotated to expect iomem.
* places that did gratitious (and wrong) casts a-la
	isa_io_base = (unsigned long)ioremap(...);
	hose->io_base_virt = (void *)isa_io_base;
  turned into
	hose->io_base_virt = ioremap(...);
	isa_io_base = (unsigned long)hose->io_base_virt;
* pci_bus_io_base() annotated as returning iomem pointer.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sigcontext.regs is a userland pointer
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace misleading definition of FIRST_USER_PGD_NR 0 by definition of
FIRST_USER_ADDRESS 0 in all the MMU architectures beyond arm and arm26.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes pm_message_t vs.  u32 confusion in ppc and aty (I *hope* that's
basically radeon code...).  I was not able to test most of these, but I'm
not really changing anything, so it should be okay.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s.  It has severe limitations
though:

 - Only 44100Khz 16 bits
 - Only work on G5 models using a TAS3004 analog code, that is early
   single CPU desktops and all dual CPU desktops at this date, but none
   of the more recent ones like iMac G5.
 - It does analog only, no digital/SPDIF support at all, no native
   AC3 support

Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...

This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).  

Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer.  So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.

Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack.  If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

make defconfig give the following error on ppc (gcc-4):

arch/ppc/syslib/prom_init.c:120: error: static declaration of ‘prom_display_paths’ follows non-static declaration
include/asm/prom.h:17: error: previous declaration of ‘prom_display_paths’ was here
arch/ppc/syslib/prom_init.c:122: error: static declaration of ‘prom_num_displays’ follows non-static declaration
include/asm/prom.h:18: error: previous declaration of ‘prom_num_displays’ was here
Signed-Off-By: NBenoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To add support for 36-bit physical addressing on e500 the following changes
have been made.  The changes are generalized to support any physical address
size larger than 32-bits:

* Allow FSL Book-E parts to use a 64-bit PTE, it is 44-bits of pfn, 20-bits
  of flags.

* Introduced new CPU feature (CPU_FTR_BIG_PHYS) to allow runtime handling of
  updating hardware register (SPRN_MAS7) which holds the upper 32-bits of
  physical address that will be written into the TLB.  This is useful since
  not all e500 cores support 36-bit physical addressing.

* Currently have a pass through implementation of fixup_bigphys_addr

* Moved _PAGE_DIRTY in the 64-bit PTE case to free room for three additional
  storage attributes that may exist in future FSL Book-E cores and updated
  fault handler to copy these bits into the hardware TLBs.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow the pfn to be offset by more than just PAGE_SHIFT in the pte.  Today,
PAGE_SHIFT tends to allow us to have 12-bits of flags in the pte.  In the
future if we have a larger pte we can allocate more bits for flags by
offsetting the pfn even further.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_PTE_64BIT & CONFIG_PHYS_64BIT are not currently consistently used in
the code base.  Fixed up the usage such that CONFIG_PTE_64BIT is used when we
have a 64-bit PTE regardless of physical address width.  CONFIG_PHYS_64BIT is
used if the physical address width is larger than 32-bits, regardless of PTE
size.

These changes required a few sub-arch specific ifdef's to be fixed and the
introduction of a physical address format string.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While the existing pte_update code handled atomically modifying a 64-bit PTE,
it did not return all 64-bits of the PTE before it was modified.  This causes
problems in some places that expect the full PTE to be returned, like
ptep_get_and_clear().

Created a new pte_update function that is conditional on CONFIG_PTE_64BIT.  It
atomically reads the low PTE word which all PTE flags are required to be in
and returns a premodified full 64-bit PTE.

Since we now have an explicit 64-bit PTE version of pte_update we can also
remove the hack that existed to get the low PTE word regardless of size.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My previous patch that added sleep support for uninorth-agp and some AGP
"off" stuff in radeonfb and aty128fb is breaking some configs.  More
specifically, it has problems with rage128 setups since the DRI code for
these in X doesn't properly re-enable AGP on wakeup or console switch
(unlike the radeon DRM).

This patch fixes the problem for pmac once for all by using a different
approach.  The AGP driver "registers" special suspend/resume callbacks with
some arch code that the fbdev's can later on call to suspend and resume
AGP, making sure it's resumed back in the same state it was when suspended.
 This is platform specific for now.  It would be too complicated to try to
do a generic implementation of this at this point due to all sort of weird
things going on with AGP on other architectures.  We'll re-work that whole
problem cleanly once we finally merge fbdev's and DRI.

In the meantime, please apply this patch which brings back some r128 based
laptops into working condition as far as system sleep is concerned.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch updates the PowerMac cpufreq driver.  It depends on the addition
of the suspend() method (my previous patch) and on the new flag I defined
to silence some warnings that are normal for us.

It fixes various issues related to cpufreq on pmac, including some crashes
on some models when sleeping the machine while in low speed, proper voltage
control on some newer machines, and adds voltage control on 750FX based G3
laptops.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!