Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 09 9月, 2010 8 次提交
    • J
      e1000: fix Tx hangs by disabling 64-bit DMA · e508be17
      由 Jesse Brandeburg 提交于 
      Several users report issues with 32-bit adapters when plugged
into PCI slots in machines with >= 4GB ram.  In particular AMD
systems with HyperTransport to PCI bridges seem to trigger the
issue, but it isn't limited to only them.

This issue is not easily reproducible here, yet still continues
to occur in the field.  For e1000 on PCI devices, just disable DMA
addresses over the 4GB boundary when in PCI (not PCI-X) mode, to
prevent the issue from continuing to pop up.  The performance
impact for this is negligible.

The code was refactored to move the init of the hw struct to its
own function. This allows the init to be called very early in
probe, which then allows using hw-> members for this fix.

A slight refactor to the DMA mask code was done for minor
correctness based on the instructions in DMA-API-HOWTO.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e508be17
    • E
      net: introduce rcu_dereference_rtnl · a6e0fc85
      由 Eric Dumazet 提交于 
      We use rcu_dereference_check(p, rcu_read_lock_held() ||
lockdep_rtnl_is_held()) several times in network stack.

More usages to come too, so its time to create a helper.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a6e0fc85
    • A
      drivers: isdn: capi: use simple_strtol to convert numbers · a7a4f1c1
      由 Andy Shevchenko 提交于 
      Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a7a4f1c1
    • N
      net: remove address space warnings in net/socket.c · fb8621bb
      由 Namhyung Kim 提交于 
      Casts __kernel to __user pointer require __force markup, so add it. Also
sock_get/setsockopt() takes @optval and/or @optlen arguments as user pointers
but were taking kernel pointers, use new variables 'uoptval' and/or 'uoptlen'
to fix it. These remove following warnings from sparse:

 net/socket.c:1922:46: warning: cast adds address space to expression (<asn:1>)
 net/socket.c:3061:61: warning: incorrect type in argument 4 (different address spaces)
 net/socket.c:3061:61:    expected char [noderef] <asn:1>*optval
 net/socket.c:3061:61:    got char *optval
 net/socket.c:3061:69: warning: incorrect type in argument 5 (different address spaces)
 net/socket.c:3061:69:    expected int [noderef] <asn:1>*optlen
 net/socket.c:3061:69:    got int *optlen
 net/socket.c:3063:67: warning: incorrect type in argument 4 (different address spaces)
 net/socket.c:3063:67:    expected char [noderef] <asn:1>*optval
 net/socket.c:3063:67:    got char *optval
 net/socket.c:3064:45: warning: incorrect type in argument 5 (different address spaces)
 net/socket.c:3064:45:    expected int [noderef] <asn:1>*optlen
 net/socket.c:3064:45:    got int *optlen
 net/socket.c:3078:61: warning: incorrect type in argument 4 (different address spaces)
 net/socket.c:3078:61:    expected char [noderef] <asn:1>*optval
 net/socket.c:3078:61:    got char *optval
 net/socket.c:3080:67: warning: incorrect type in argument 4 (different address spaces)
 net/socket.c:3080:67:    expected char [noderef] <asn:1>*optval
 net/socket.c:3080:67:    got char *optval
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fb8621bb
    • J
      include/net/raw.h: Convert raw_seq_private macro to inline · e3634169
      由 Joe Perches 提交于 
      Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e3634169
    • O
      introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver · cc28a20e
      由 Ondrej Zary 提交于 
      This patch introduces cx82310_eth driver - driver for USB ethernet port of
ADSL routers based on Conexant CX82310 chips. Such routers usually have
ethernet port(s) too which are bridged together with the USB ethernet port,
allowing the USB-connected machine to communicate to the network (and also
internet through the ADSL, of course).

This is my first driver, so please check thoroughly. As there's no protocol
documentation, it was done with usbsnoop dumps from Windows driver, some
parts (the commands) inspired by cxacru driver and also other usbnet drivers.
The driver passed my testing - some real work and also pings sized from 0 to
65507 B.

The only problem I found is the ifconfig error counter. When I return 0 (or 1
but empty skb) from rx_fixup(), usbnet increases the error counter although
it's not an error condition (because packets can cross URB boundaries). Maybe
the usbnet should be fixed to allow rx_fixup() to return empty skbs (or some
other value, e.g. 2)?

The USB ID of my device is 0x0572:0xcb01 which conflicts with some ADSL modems
using cxacru driver (they probably use the same chipset but simpler
firmware). The modems seem to use bDeviceClass 0 and iProduct "ADSL USB
MODEM", my router uses bDeviceClass 255 and iProduct "USB NET CARD". The
driver matches only devices with class 255 and checks for the iProduct string
during init. I already posted a patch for the cxacru driver to ignore these
devices.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cc28a20e
    • C
      net: rps: add the shortcut for one rps_cpus · 6febfca9
      由 Changli Gao 提交于 
      When there is only one rps_cpus, skb_get_rxhash() can be eliminated.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6febfca9
    • D
      sctp: implement SIOCINQ ioctl() (take 3) · 65040c33
      由 Diego Elio 'Flameeyes' Pettenò 提交于 
      This simple patch copies the current approach for SIOCINQ ioctl() from DCCP
into SCTP so that the userland code working with SCTP can use a similar
interface across different protocols to know how much space to allocate for
a buffer.
Signed-off-by: NDiego Elio Pettenò <flameeyes@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      65040c33
  3. 08 9月, 2010 11 次提交
  5. 07 9月, 2010 21 次提交