Removed unused #include <version.h>'s in btrfs
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There were many, most are fixed now.  struct-funcs.c generates some warnings
but these are bogus.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Make sure directory's size properly updated when creating
subvol/snapshot.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Only root can add/remove devices
Only root can defrag subtrees
Only files open for writing can be defragged
Only files open for writing can be the destination for a clone
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch adds the missing mnt_drop_write to match
mnt_want_write in btrfs_ioctl_defrag and btrfs_ioctl_clone
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

The block group structs are referenced in many different
places, and it's not safe to free while balancing.  So, those block
group structs were simply leaked instead.

This patch replaces the block group pointer in the inode with the starting byte
offset of the block group and adds reference counting to the block group
struct.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Add missing mnt_drop_write to match the mnt_want_write in
btrfs_ioctl_trans_start.
Signed-off-by: NSage Weil <sage@newdream.net>

Btrfs stores checksums for each data block.  Until now, they have
been stored in the subvolume trees, indexed by the inode that is
referencing the data block.  This means that when we read the inode,
we've probably read in at least some checksums as well.

But, this has a few problems:

* The checksums are indexed by logical offset in the file.  When
compression is on, this means we have to do the expensive checksumming
on the uncompressed data.  It would be faster if we could checksum
the compressed data instead.

* If we implement encryption, we'll be checksumming the plain text and
storing that on disk.  This is significantly less secure.

* For either compression or encryption, we have to get the plain text
back before we can verify the checksum as correct.  This makes the raid
layer balancing and extent moving much more expensive.

* It makes the front end caching code more complex, as we have touch
the subvolume and inodes as we cache extents.

* There is potentitally one copy of the checksum in each subvolume
referencing an extent.

The solution used here is to store the extent checksums in a dedicated
tree.  This allows us to index the checksums by phyiscal extent
start and length.  It means:

* The checksum is against the data stored on disk, after any compression
or encryption is done.

* The checksum is stored in a central location, and can be verified without
following back references, or reading inodes.

This makes compression significantly faster by reducing the amount of
data that needs to be checksummed.  It will also allow much faster
raid management code in general.

The checksums are indexed by a key with a fixed objectid (a magic value
in ctree.h) and offset set to the starting byte of the extent.  This
allows us to copy the checksum items into the fsync log tree directly (or
any other tree), without having to invent a second format for them.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch gives us the space we will need in order to have different csum
algorithims at some point in the future.  We save the csum algorithim type
in the superblock, and use those instead of define's.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

Cleans the code up a little and also avoids a sparse warning due to the
incorrect cast in the current version of the code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Provide a void __user *argp pointer so that we can avoid duplicating
the cast for various sub-command calls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Shut up various sparse warnings about symbols that should be either
static or have their declarations in scope.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

It is called by btrfs_sync_fs.
Signed-off-by: NSage Weil <sage@newdream.net>

The btrfs git kernel trees is used to build a standalone tree for
compiling against older kernels.  This commit makes the standalone tree
work with 2.6.27
Signed-off-by: NChris Mason <chris.mason@oracle.com>

For a directory tree:

/mnt/subvolA/subvolB

btrfsctl -s /mnt/subvolA/subvolB /mnt

Will create a directory loop with subvolA under subvolB.  This
commit uses the forward refs for each subvol and snapshot to error out
before creating the loop.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Subvols and snapshots can now be referenced from any point in the directory
tree.  We need to maintain back refs for them so we can find lost
subvols.

Forward refs are added so that we know all of the subvols and
snapshots referenced anywhere in the directory tree of a single subvol.  This
can be used to do recursive snapshotting (but they aren't yet) and it is
also used to detect and prevent directory loops when creating new snapshots.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Each subvolume has its own private inode number space, and so we need
to fill in different device numbers for each subvolume to avoid confusing
applications.

This commit puts a struct super_block into struct btrfs_root so it can
call set_anon_super() and get a different device number generated for
each root.

btrfs_rename is changed to prevent renames across subvols.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before, all snapshots and subvolumes lived in a single flat directory.  This
was awkward and confusing because the single flat directory was only writable
with the ioctls.

This commit changes the ioctls to create subvols and snapshots at any
point in the directory tree.  This requires making separate ioctls for
snapshot and subvol creation instead of a combining them into one.

The subvol ioctl does:

btrfsctl -S subvol_name parent_dir

After the ioctl is done subvol_name lives inside parent_dir.

The snapshot ioctl does:

btrfsctl -s path_for_snapshot root_to_snapshot

path_for_snapshot can be an absolute or relative path.  btrfsctl breaks it up
into directory and basename components.

root_to_snapshot can be any file or directory in the FS.  The snapshot
is taken of the entire root where that file lives.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Seed device is a special btrfs with SEEDING super flag
set and can only be mounted in read-only mode. Seed
devices allow people to create new btrfs on top of it.

The new FS contains the same contents as the seed device,
but it can be mounted in read-write mode.

This patch does the following:

1) split code in btrfs_alloc_chunk into two parts. The first part does makes
the newly allocated chunk usable, but does not do any operation that modifies
the chunk tree. The second part does the the chunk tree modifications. This
division is for the bootstrap step of adding storage to the seed device.

2) Update device management code to handle seed device.
The basic idea is: For an FS grown from seed devices, its
seed devices are put into a list. Seed devices are
opened on demand at mounting time. If any seed device is
missing or has been changed, btrfs kernel module will
refuse to mount the FS.

3) make btrfs_find_block_group not return NULL when all
block groups are read-only.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch adds mount ro and remount support. The main
changes in patch are: adding btrfs_remount and related
helper function; splitting the transaction related code
out of close_ctree into btrfs_commit_super; updating
allocator to properly handle read only block group.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch adds an additional CLONE_RANGE ioctl to clone an arbitrary 
(block-aligned) file range to another file.  The original CLONE ioctl 
becomes a special case of cloning the entire file range.  The logic is a 
bit more complex now since ranges may be cloned to different offsets, and 
because we may only be cloning the beginning or end of a particular extent 
or checksum item.

An additional sanity check ensures the source and destination files aren't 
the same (which would previously deadlock), although eventually this could 
be extended to allow the duplication of file data at a different offset 
within the same file.

Any extents within the destination range in the target file are dropped.

We currently do not cope with the case where a compressed inline extent 
needs to be split.  This will probably require decompressing the extent 
into a temporary address_space, and inserting just the cloned portion as a 
new compressed inline extent.  For now, just return -EINVAL in this case.  
Note that this never comes up in the more common case of cloning an entire 
file.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch updates btrfs-progs for fallocate support.

fallocate is a little different in Btrfs because we need to tell the
COW system that a given preallocated extent doesn't need to be
cow'd as long as there are no snapshots of it.  This leverages the
-o nodatacow checks.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch simplifies the nodatacow checker. If all references
were created after the latest snapshot, then we can avoid COW
safely. This patch also updates run_delalloc_nocow to do more
fine-grained checking.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch adds transaction IDs to root tree pointers.
Transaction IDs in tree pointers are compared with the
generation numbers in block headers when reading root
blocks of trees. This can detect some types of IO errors.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Subvol creation already requires privs, and security_inode_mkdir isn't
exported.  For now we don't need it.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Creating a subvolume is in many ways like a normal VFS ->mkdir, and we
really need to play with the VFS topology locking rules.  So instead of
just creating the snapshot on disk and then later getting rid of
confliting aliases do it correctly from the start.  This will become
especially important once we allow for subvolumes anywhere in the tree,
and not just below a hidden root.

Note that snapshots will need the same treatment, but do to the delay
in creating them we can't do it currently.  Chris promised to fix that
issue, so I'll wait on that.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The offset field in struct btrfs_extent_ref records the position
inside file that file extent is referenced by. In the new back
reference system, tree leaves holding references to file extent
are recorded explicitly. We can scan these tree leaves very quickly, so the
offset field is not required.

This patch also makes the back reference system check the objectid
when extents are in deleting.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch makes btrfs count space allocated to file in bytes instead
of 512 byte sectors.

Everything else in btrfs uses a byte count instead of sector sizes or
blocks sizes, so this fits better.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

* Add an EXTENT_BOUNDARY state bit to keep the writepage code
from merging data extents that are in the process of being
relocated.  This allows us to do accounting for them properly.

* The balancing code relocates data extents indepdent of the underlying
inode.  The extent_map code was modified to properly account for
things moving around (invalidating extent_map caches in the inode).

* Don't take the drop_mutex in the create_subvol ioctl.  It isn't
required.

* Fix walking of the ordered extent list to avoid races with sys_unlink

* Change the lock ordering rules.  Transaction start goes outside
the drop_mutex.  This allows btrfs_commit_transaction to directly
drop the relocation trees.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes the back reference system to explicit record the
location of parent node for all types of extents. The location of
parent node is placed into the offset field of backref key. Every
time a tree block is balanced, the back references for the affected
lower level extents are updated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Fix a bunch of trivial sparse complaints.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch updates the file clone ioctl for the tree locking and new
data ordered code.

---
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Commit 597:466b27332893 (btrfs_start_transaction: wait for commits in
progress) breaks the transaction start/stop ioctls by making
btrfs_start_transaction conditionally wait for the next transaction to
start.  If an application artificially is holding a transaction open,
things deadlock.

This workaround maintains a count of open ioctl-initiated transactions in
fs_info, and avoids wait_current_trans() if any are currently open (in
start_transaction() and btrfs_throttle()).  The start transaction ioctl
uses a new btrfs_start_ioctl_transaction() that _does_ call
wait_current_trans(), effectively pushing the join/wait decision to the
outer ioctl-initiated transaction.

This more or less neuters btrfs_throttle() when ioctl-initiated
transactions are in use, but that seems like a pretty fundamental
consequence of wrapping lots of write()'s in a transaction.  Btrfs has no
way to tell if the application considers a given operation as part of it's
transaction.

Obviously, if the transaction start/stop ioctls aren't being used, there
is no effect on current behavior.
Signed-off-by: NSage Weil <sage@newdream.net>
---
 ctree.h       |    1 +
 ioctl.c       |   12 +++++++++++-
 transaction.c |   18 +++++++++++++-----
 transaction.h |    2 ++
 4 files changed, 27 insertions(+), 6 deletions(-)
Signed-off-by: NChris Mason <chris.mason@oracle.com>

While dropping snapshots, walk_down_tree does most of the work of checking
reference counts and limiting tree traversal to just the blocks that
we are freeing.

It dropped and held the allocation mutex in strange and confusing ways,
this commit changes it to only hold the mutex while actually freeing a block.

The rest of the checks around reference counts should be safe without the lock
because we only allow one process in btrfs_drop_snapshot at a time.  Other
processes dropping reference counts should not drop it to 1 because
their tree roots already have an extra ref on the block.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The 'char name[BTRFS_PATH_NAME_MAX]' member of struct btrfs_ioctl_vol_args
is passed directly to strlen() after being copied from user. I haven't
verified this, but in theory a userspace program could pass in an
unterminated string and cause a kernel crash as strlen walks off the end of
the array.

This patch terminates the ->name string in all btrfs ioctl functions which
currently use a 'struct btrfs_ioctl_vol_args'. Since the string is now
properly terminated, it's length will never be longer than
BTRFS_PATH_NAME_MAX so that error check has been removed.

By the way, it might be better overall to just have the ioctl pass an
unterminated string + length structure but I didn't bother with that since
it'd change the kernel/user interface.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before setting an extent to delalloc, the code needs to wait for
pending ordered extents.

Also, the relocation code needs to wait for ordered IO before scanning
the block group again.  This is because the extents are not removed
until the IO for the new extents is finished
Signed-off-by: NChris Mason <chris.mason@oracle.com>