- 11 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
commit 739be96a "ASoC: Fix build dependency for SND_ATMEL_SOC_SSC" introduces below build warnings: drivers/misc/Kconfig:212:error: recursive dependency detected! drivers/misc/Kconfig:212: symbol ATMEL_SSC is selected by SND_ATMEL_SOC_SSC sound/soc/atmel/Kconfig:9: symbol SND_ATMEL_SOC_SSC is selected by SND_AT91_SOC_SAM9G20_WM8731 sound/soc/atmel/Kconfig:18: symbol SND_AT91_SOC_SAM9G20_WM8731 depends on ATMEL_SSC SND_ATMEL_SOC_SSC needs ATMEL_SSC to pass compilation. This patch remove the "select ATMEL_SSC" from SND_ATMEL_SOC_SSC to avoid above warnings. And then ensures all the machine drivers that select SND_ATMEL_SOC_SSC need to depend on ATMEL_SSC. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 1月, 2012 1 次提交
-
-
由 Joachim Eastwood 提交于
This is a follow up on 53dea36c which fixes the other affected pcm engines. Description from 53dea36c: Don't rely on the codec's channels_min information to decide wheter or not allocate a substream's DMA buffer. Rather check if the substream itself was allocated previously. Without this patch I was seeing null-pointer dereferenc in atmel-pcm. Signed-off-by: NJoachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
Make SND_ATMEL_SOC_SSC select ATMEL_SSC to fix below build errors: LD .tmp_vmlinux1 sound/built-in.o: In function `atmel_ssc_remove': sound/soc/atmel/atmel_ssc_dai.c:713: undefined reference to `ssc_free' sound/built-in.o: In function `atmel_ssc_probe': sound/soc/atmel/atmel_ssc_dai.c:700: undefined reference to `ssc_request' sound/built-in.o: In function `atmel_ssc_set_audio': sound/soc/atmel/atmel_ssc_dai.c:845: undefined reference to `ssc_request' sound/soc/atmel/atmel_ssc_dai.c:851: undefined reference to `ssc_free' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 12月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Missed .owner of struct snd_soc_card will prevent the module from being removed from underneath its users. Reported-by: NLothar Waßmann <LW@KARO-electronics.de> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 11月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Factor out some boilerplate code. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 11月, 2011 2 次提交
-
-
由 Lars-Peter Clausen 提交于
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Paul Bolle 提交于
SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca968 ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 10月, 2011 1 次提交
-
-
由 Mark Brown 提交于
The core will sync DAPM as part of the card initialization, there is no need for machine drivers to do so during their setup. OMAP drivers are omitted as I know Peter already has patches for them. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Return proper error instead of 0 if clk_get fails. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 6月, 2011 1 次提交
-
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 6月, 2011 1 次提交
-
-
由 Liam Girdwood 提交于
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 6月, 2011 1 次提交
-
-
由 Mark Brown 提交于
The card callback will get called for each DAPM context in the card so it can be useful for it to know which device is currently undergoing a transition. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
- 03 6月, 2011 1 次提交
-
-
由 Joachim Eastwood 提交于
We should only call ssc_free() when ssc_request() succeeds or bad things will happen. Signed-off-by: NJoachim Eastwood <joachim.eastwood@jotron.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 26 5月, 2011 4 次提交
-
-
由 Nicolas Ferre 提交于
at91sam9g20 is providing master clock to wm8731: not using a crystal but an external MCLK. We can avoid conflict and save power using WM8731_SYSCLK_MCLK as we do not need oscillator to be powered. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Nicolas Ferre 提交于
We do not have to free a resource that is not allocated yet. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 30 3月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
- 25 1月, 2011 1 次提交
-
-
由 Lars-Peter Clausen 提交于
The id part of an I2C device name is created with the "%d-%04x" format string. So for example for an I2C device which is connected to the adapter with the id 0 and has its address set to 0x1a the id part of the devices name would be "0-001a". Currently some sound board drivers have the id part the codec_name field of their dai_link structures set as if it had been created by a "%d-0x%x" format string. For example "0-0x1a" instead of "0-001a". As a result there is no match between the codec device and the dai_link and no sound card is instantiated. This patch fixes it. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 25 11月, 2010 2 次提交
-
-
由 Axel Lin 提交于
Fix the error path to properly free allocated resources. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 11月, 2010 1 次提交
-
-
由 Vasiliy Kulikov 提交于
After clk_get() mclk is checked second time instead of pllb check. In patch v1 Jarkko Nikula noticed that PTR_ERR() is also has wrong argument. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 11月, 2010 1 次提交
-
-
由 Jarkko Nikula 提交于
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 11月, 2010 1 次提交
-
-
由 Ryan Mallon 提交于
Add Kconfig dependency on AT91_PROGRAMMABLE_CLOCKS for the Atmel SoC audio SAM9G20-EK and PlayPaq boards. Fixes link errors on missing clk_set_parent and clk_set_rate when building without AT91_PROGRAMMABLE_CLOCKS. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> Acked-by: NGeoffrey Wossum <gwossum@acm.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 11月, 2010 1 次提交
-
-
由 Liam Girdwood 提交于
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 8月, 2010 4 次提交
-
-
由 Mark Brown 提交于
Since the SSC is already being registered as a device under arch and the DMA and SSC hardware are pretty much the same provide a simplified device registration function for the Atmel SSC which will add the ASoC-specific devices within the ASoC code, parenting the SSC device off the actual SSC device. Also use it in the sam9g20-ek driver. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
A couple of typos in the multi-component conversion. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Instead of unconditionally enabling the crystal oscillator on the WM8731 only enable it when explicitly selected via set_sysclk(), allowing machine drivers to specify that they drive a clock into MCLK alone. This avoids any conflicts between the oscillator and the external MCLK source and saves power for systems which do not need the oscillator. This should also deliver a small power saving on systems using the crystal since the oscillator will only be enabled when the ADC or DAC is active. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Instead of unconditionally enabling the crystal oscillator on the WM8731 only enable it when explicitly selected via set_sysclk(), allowing machine drivers to specify that they drive a clock into MCLK alone. This avoids any conflicts between the oscillator and the external MCLK source and saves power for systems which do not need the oscillator. This should also deliver a small power saving on systems using the crystal since the oscillator will only be enabled when the ADC or DAC is active. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 8月, 2010 1 次提交
-
-
由 Liam Girdwood 提交于
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: NTimur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: NTimur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 07 6月, 2010 1 次提交
-
-
由 Wan ZongShun 提交于
Remove break after return, it is not needed. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 6月, 2010 1 次提交
-
-
由 Wan ZongShun 提交于
The variable 'periods' of structure 'atmel_runtime_data' seems no use in whole atmel alsa driver,so I make a patch to remove the unnecessary variable. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 4月, 2010 1 次提交
-
-
由 Daniel Mack 提交于
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7de] Signed-off-by: NDaniel Mack <daniel@caiaq.de> Reported-by: NSven Neumann <s.neumann@raumfeld.com> Reported-by: NMichael Hirsch <m.hirsch@raumfeld.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 3月, 2010 1 次提交
-
-
由 Daniel Mack 提交于
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. Reported-by: NSven Neumann <s.neumann@raumfeld.com> Reported-by: NMichael Hirsch <m.hirsch@raumfeld.com> Signed-off-by: NDaniel Mack <daniel@caiaq.de> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 2月, 2010 2 次提交
-
-
由 jassi brar 提交于
Currently only the atmel driver make use of snd_soc_dai.runtime field. If the dais are to be shared among two or more dai_links, the field must be got rid of. So, in atmel driver reach the substream via dai_link->pcm so as to not depend of snd_soc_dai.runtime field. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 jassi brar 提交于
Passing pointer to relevant dai_link provides easier reach to the ASoC tree in suspend/resume of snd_soc_platform. It also provides direct access to the dai at the other end of the dai_link. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 10月, 2009 1 次提交
-
-
由 Nicolas Ferre 提交于
The modified revision of at91sam9g20 Evaluation Kit rev. C and onwards share with previous ones its audio connexion to Wolfson wm8731. Modify the SoC file to extend the machine ID checking. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 9月, 2009 1 次提交
-
-
由 Mark Brown 提交于
More and more devices feature PLLs and FLLs with the ability to select between multiple input clocks. In order to better support these devices a new argument, source, has been added to the set_pll() configuration API. Using set_clkdiv() is often difficult due to the need to stop the PLL/FLL before any reconfiguration can be done. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 7月, 2009 1 次提交
-
-
由 Mark Brown 提交于
The WM8731 driver has been updated to allow registration via normal device model methods rather than from within the ASoC driver probe so update the AT91SAM9G20-EK to make use of this. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-