- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 11 2月, 2010 3 次提交
-
-
由 Magnus Damm 提交于
Add mode 6 support to the sh_keysc driver. Also update the KYOUTDR mask value to include all 16 register bits. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Magnus Damm 提交于
Use bitmaps instead of using 32-bit integers to keep track of the key states. With this change in place the driver supports key pads with more than 32 keys. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Magnus Damm 提交于
Update the sh_keysc driver to factor out the register access functions sh_keysc_read(), sh_keysc_write() together with sh_keysc_level_mode(). This makes the code a bit easier to follow. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 1月, 2010 1 次提交
-
-
由 Magnus Damm 提交于
Add Mode 4 and Mode 5 support to the SH_KEYSC driver. These modes allow slightly larger key pad matrixes. While at it, make use of resource_size(). Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 16 12月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 11月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
This patch moves the KEYSC header file from the SuperH specific asm directory to a place where it can be shared by multiple architectures. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 15 9月, 2009 1 次提交
-
-
由 Kuninori Morimoto 提交于
After KYCR2 is set, udelay might become necessary if there are only a small number of keys attached. This patch introduces an optional delay through the platform data to address this problem. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 7月, 2009 1 次提交
-
-
由 Dmitry Torokhov 提交于
Adjust the driver so EVIOCGKEYCODE/EVIOCSKEYCODE work. Acked-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 02 4月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Modify the sh_keysc driver to use enable/disable_irq_wake() during suspend and resume. These functions are used to enable the sh_keysc interrupt in the interrupt controller so the keypad can be used to wakeup the system from suspend. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 11 3月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
This patch changes sh_keysc to use to_platform_device() for suspend. Thanks to Trilok Soni for this suggestion. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Reviewed-by: NTrilok Soni <soni.trilok@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 10 3月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
This patch adds wakeup support to the sh_keysc driver. With this feature the ".../power/wakeup" file can be used to enable and disable if the device takes the system out of suspend. Default is enabled. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 12月, 2008 1 次提交
-
-
由 Magnus Damm 提交于
Add clock framework support to the sh_mobile keysc driver and adjust the board specific code accordingly. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 28 7月, 2008 1 次提交
-
-
由 Tetsuya Mukawa 提交于
Remove request_mem_region() and release_mem_region() from sh_keysc driver. Those functions can find resource conflict, but it is already checked in platform_device_add(). Signed-off-by: NTetsuya Mukawa <mukawa@igel.co.jp> Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 19 4月, 2008 2 次提交
-
-
由 Magnus Damm 提交于
Avoid double free situation from happening by removing input_free_device() after input_unregister_device(). Suggested by Dmitry Torokhov. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add a platform driver for the SuperH KEYSC block. The driver expects to get mode, timing information and keypad layout from the board code as platform data. The board code is resonsible for pin configuration. Both sh7343 and sh7722 should be supported, but only the sh7722 processor has been tested so far. SH_KEYSC_MODE_3 is yet to be tested. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-