And also some TIME_WAIT functions.

[acme@toy net-2.6.14]$ grep built-in /tmp/before.size /tmp/after.size
/tmp/before.size: 282955   13122    9312  305389   4a8ed net/ipv4/built-in.o
/tmp/after.size:  281566   13122    9312  304000   4a380 net/ipv4/built-in.o
[acme@toy net-2.6.14]$

I kept them still inlined, will uninline at some point to see what
would be the performance difference.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This paves the way to generalise the rest of the sock ID lookup
routines and saves some bytes in TCPv4 TIME_WAIT sockets on distro
kernels (where IPv6 is always built as a module):

[root@qemu ~]# grep tw_sock /proc/slabinfo
tw_sock_TCPv6  0  0  128  31  1
tw_sock_TCP    0  0   96  41  1
[root@qemu ~]#

Now if a protocol wants to use the TIME_WAIT generic infrastructure it
only has to set the sk_prot->twsk_obj_size field with the size of its
inet_timewait_sock derived sock and proto_register will create
sk_prot->twsk_slab, for now its only for INET sockets, but we can
introduce timewait_sock later if some non INET transport protocolo
wants to use this stuff.

Next changesets will take advantage of this new infrastructure to
generalise even more TCP code.

[acme@toy net-2.6.14]$ grep built-in /tmp/before.size /tmp/after.size
/tmp/before.size: 188646   11764    5068  205478   322a6 net/ipv4/built-in.o
/tmp/after.size:  188144   11764    5068  204976   320b0 net/ipv4/built-in.o
[acme@toy net-2.6.14]$

Tested with both IPv4 & IPv6 (::1 (localhost) & ::ffff:172.20.0.1
(qemu host)).
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[acme@toy net-2.6.14]$ grep built-in /tmp/before /tmp/after
/tmp/before: 282560       13122    9312  304994   4a762 net/ipv4/built-in.o
/tmp/after:  282560       13122    9312  304994   4a762 net/ipv4/built-in.o

Will be used in DCCP, not exporting it right now not to get in Adrian
Bunk's exported-but-not-used-on-modules radar 8)
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It really just makes the existing code be a helper function that
tcp_v4_hash and tcp_unhash uses, specifying the right inet_hashinfo,
tcp_hashinfo.

One thing I'll investigate at some point is to have the inet_hashinfo
pointer in sk_prot, so that we get all the hashtable information from
the sk pointer, this can lead to some extra indirections that may well
hurt performance/code size, we'll see. Ultimate idea would be that
sk_prot would provide _all_ the information about a protocol
implementation.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also expose all of the tcp_hashinfo members, i.e. killing those
tcp_ehash, etc macros, this will more clearly expose already generic
functions and some that need just a bit of work to become generic, as
we'll see in the upcoming changesets.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This required moving tcp_bucket_cachep to inet_hashinfo.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This should really be in a inet_connection_sock, but I'm leaving it
for a later optimization, when some more fields common to INET
transport protocols now in tcp_sk or inet_sk will be chunked out into
inet_connection_sock, for now its better to concentrate on getting the
changes in the core merged to leave the DCCP tree with only DCCP
specific code.

Next changesets will take advantage of this move to generalise things
like tcp_bind_hash, tcp_put_port, tcp_inherit_port, making the later
receive a inet_hashinfo parameter, and even __tcp_tw_hashdance, etc in
the future, when tcp_tw_bucket gets transformed into the struct
timewait_sock hierarchy.

tcp_destroy_sock also is eligible as soon as tcp_orphan_count gets
moved to sk_prot.

A cascade of incremental changes will ultimately make the tcp_lookup
functions be fully generic.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is to break down the complexity of the series of patches,
making it very clear that this one just does:

1. renames tcp_ prefixed hashtable functions and data structures that
   were already mostly generic to inet_ to share it with DCCP and
   other INET transport protocols.

2. Removes not used functions (__tb_head & tb_head)

3. Removes some leftover prototypes in the headers (tcp_bucket_unlock &
   tcp_v4_build_header)

Next changesets will move tcp_sk(sk)->bind_hash to inet_sock so that we can
make functions such as tcp_inherit_port, __tcp_inherit_port, tcp_v4_get_port,
__tcp_put_port,  generic and get others like tcp_destroy_sock closer to generic
(tcp_orphan_count will go to sk->sk_prot to allow this).

Eventually most of these functions will be used passing the transport protocol
inet_hashinfo structure.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To be shared with DCCP (and others), this is the start of a series of patches
that will expose the already generic TCP hash table routines.

The few changes noticed when calling gcc -S before/after on a pentium4 were of
this type:

        movl    40(%esp), %edx
        cmpl    %esi, 472(%edx)
        je      .L168
-       pushl   $291
+       pushl   $272
        pushl   $.LC0
        pushl   $.LC1
        pushl   $.LC2

[acme@toy net-2.6.14]$ size net/ipv4/tcp_ipv4.before.o net/ipv4/tcp_ipv4.after.o
   text    data     bss     dec     hex filename
  17804     516     140   18460    481c net/ipv4/tcp_ipv4.before.o
  17804     516     140   18460    481c net/ipv4/tcp_ipv4.after.o

Holler if some weird architecture has issues with things like this 8)
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From tcp_v4_rebuild_header, that already was pretty generic, I only
needed to use sk->sk_protocol instead of the hardcoded IPPROTO_TCP and
establish the requirement that INET transport layer protocols that
want to use this function map TCP_SYN_SENT to its equivalent state.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From tcp_v4_setup_caps, that always is preceded by a call to
__sk_dst_set, so coalesce this sequence into sk_setup_caps, removing
one call to a TCP function in the IP layer.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This operation was already generic and DCCP will use it.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This trips up a lot of folks reading this code.
Put an unlikely() around the port-exhaustion test
for good measure.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here's a small patch to cleanup NETDEBUG() use in net/ipv4/ for Linux 
kernel 2.6.13-rc5. Also weird use of indentation is changed in some
places.
Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make TSO segment transmit size decisions at send time not earlier.

The basic scheme is that we try to build as large a TSO frame as
possible when pulling in the user data, but the size of the TSO frame
output to the card is determined at transmit time.

This is guided by tp->xmit_size_goal.  It is always set to a multiple
of MSS and tells sendmsg/sendpage how large an SKB to try and build.

Later, tcp_write_xmit() and tcp_push_one() chop up the packet if
necessary and conditions warrant.  These routines can also decide to
"defer" in order to wait for more ACKs to arrive and thus allow larger
TSO frames to be emitted.

A general observation is that TSO elongates the pipe, thus requiring a
larger congestion window and larger buffering especially at the sender
side.  Therefore, it is important that applications 1) get a large
enough socket send buffer (this is accomplished by our dynamic send
buffer expansion code) 2) do large enough writes.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow using setsockopt to set TCP congestion control to use on a per
socket basis.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow TCP to have multiple pluggable congestion control algorithms.
Algorithms are defined by a set of operations and can be built in
or modules.  The legacy "new RENO" algorithm is used as a starting
point and fallback.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the CONFIG_INET=n build failure noticed
by Andrew Morton.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This chunks out the accept_queue and tcp_listen_opt code and moves
them to net/core/request_sock.c and include/net/request_sock.h, to
make it useful for other transport protocols, DCCP being the first one
to use it.

Next patches will rename tcp_listen_opt to accept_sock and remove the
inline tcp functions that just call a reqsk_queue_ function.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ok, this one just renames some stuff to have a better namespace and to
dissassociate it from TCP:

struct open_request  -> struct request_sock
tcp_openreq_alloc    -> reqsk_alloc
tcp_openreq_free     -> reqsk_free
tcp_openreq_fastfree -> __reqsk_free

With this most of the infrastructure closely resembles a struct
sock methods subset.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kept this first changeset minimal, without changing existing names to
ease peer review.

Basicaly tcp_openreq_alloc now receives the or_calltable, that in turn
has two new members:

->slab, that replaces tcp_openreq_cachep
->obj_size, to inform the size of the openreq descendant for
  a specific protocol

The protocol specific fields in struct open_request were moved to a
class hierarchy, with the things that are common to all connection
oriented PF_INET protocols in struct inet_request_sock, the TCP ones
in tcp_request_sock, that is an inet_request_sock, that is an
open_request.

I.e. this uses the same approach used for the struct sock class
hierarchy, with sk_prot indicating if the protocol wants to use the
open_request infrastructure by filling in sk_prot->rsk_prot with an
or_calltable.

Results? Performance is improved and TCP v4 now uses only 64 bytes per
open request minisock, down from 96 without this patch :-)

Next changeset will rename some of the structs, fields and functions
mentioned above, struct or_calltable is way unclear, better name it
struct request_sock_ops, s/struct open_request/struct request_sock/g,
etc.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFolkert van Heusden <folkert@vanheusden.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!