APIC-write VM exits are "trap-like": they save CS:RIP values for the
instruction after the write, and more importantly, the handler will
already see the new value in the virtual-APIC page.

This caused a bug if you used KVM_SET_IRQCHIP to set the SW-enabled bit
in the SPIV register.  The chain of events is as follows:

* When the irqchip is added to the destination VM, the apic_sw_disabled
static key is incremented (1)

* When the KVM_SET_IRQCHIP ioctl is invoked, it is decremented (0)

* When the guest disables the bit in the SPIV register, e.g. as part of
shutdown, apic_set_spiv does not notice the change and the static key is
_not_ incremented.

* When the guest is destroyed, the static key is decremented (-1),
resulting in this trace:

  WARNING: at kernel/jump_label.c:81 __static_key_slow_dec+0xa6/0xb0()
  jump label: negative count!

  [<ffffffff816bf898>] dump_stack+0x19/0x1b
  [<ffffffff8107c6f1>] warn_slowpath_common+0x61/0x80
  [<ffffffff8107c76c>] warn_slowpath_fmt+0x5c/0x80
  [<ffffffff811931e6>] __static_key_slow_dec+0xa6/0xb0
  [<ffffffff81193226>] static_key_slow_dec_deferred+0x16/0x20
  [<ffffffffa0637698>] kvm_free_lapic+0x88/0xa0 [kvm]
  [<ffffffffa061c63e>] kvm_arch_vcpu_uninit+0x2e/0xe0 [kvm]
  [<ffffffffa05ff301>] kvm_vcpu_uninit+0x21/0x40 [kvm]
  [<ffffffffa067cec7>] vmx_free_vcpu+0x47/0x70 [kvm_intel]
  [<ffffffffa061bc50>] kvm_arch_vcpu_free+0x50/0x60 [kvm]
  [<ffffffffa061ca22>] kvm_arch_destroy_vm+0x102/0x260 [kvm]
  [<ffffffff810b68fd>] ? synchronize_srcu+0x1d/0x20
  [<ffffffffa06030d1>] kvm_put_kvm+0xe1/0x1c0 [kvm]
  [<ffffffffa06036f8>] kvm_vcpu_release+0x18/0x20 [kvm]
  [<ffffffff81215c62>] __fput+0x102/0x310
  [<ffffffff81215f4e>] ____fput+0xe/0x10
  [<ffffffff810ab664>] task_work_run+0xb4/0xe0
  [<ffffffff81083944>] do_exit+0x304/0xc60
  [<ffffffff816c8dfc>] ? _raw_spin_unlock_irq+0x2c/0x50
  [<ffffffff810fd22d>] ?  trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff8108432c>] do_group_exit+0x4c/0xc0
  [<ffffffff810843b4>] SyS_exit_group+0x14/0x20
  [<ffffffff816d33a9>] system_call_fastpath+0x16/0x1b
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

commit 72dc67a6 ("KVM: remove the usage of the mmap_sem for the protection of the memory slots.")
changed the lock which will be taken. This should be reflected in the function
commentary.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose Intel AVX-512 feature bits to guest. Also add checks for
xcr0 AVX512 related bits according to spec:
http://download-software.intel.com/sites/default/files/managed/71/2e/319433-017.pdfSigned-off-by: NChao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No kernel ever reported KVM_CAP_DEVICE_MSIX, KVM_CAP_DEVICE_MSI,
KVM_CAP_DEVICE_ASSIGNMENT, KVM_CAP_DEVICE_DEASSIGNMENT.

This makes the documentation wrong, and no application ever
written to use these capabilities has a chance to work correctly.
The only way to detect support is to try, and test errno for ENOTTY.
That's unfortunate, but we can't fix the past.

Document the actual semantics, and drop the definitions from
the exported header to make it easier for application
developers to note and fix the bug.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The check in kvm_set_lapic_tscdeadline_msr() was trying to prevent a
situation where we lose a pending deadline timer in a MSR write.
Losing it is fine, because it effectively occurs before the timer fired,
so we should be able to cancel or postpone it.

Another problem comes from interaction with QEMU, or other userspace
that can set deadline MSR without a good reason, when timer is already
pending:  one guest's deadline request results in more than one
interrupt because one is injected immediately on MSR write from
userspace and one through hrtimer later.

The solution is to remove the injection when replacing a pending timer
and to improve the usual QEMU path, we inject without a hrtimer when the
deadline has already passed.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reported-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Make the code reusable.

If the timer was already pending, we shouldn't be waiting in a queue,
so wake_up can be skipped, simplifying the path.

There is no 'reinject' case => the comment is removed.
Current race behaves correctly.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When commit 6adba527 (KVM: Let host know whether the guest can
handle async PF in non-userspace context.) is introduced, actually
bit 2 still is reserved and should be zero. Instead, bit 1 is 1 to
indicate if asynchronous page faults can be injected when vcpu is
in cpl == 0, and also please see this,

in the file kvm_para.h, #define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1).
Signed-off-by: NTiejun Chen <tiejun.chen@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If DR4/5 is accessed when it is unavailable (since CR4.DE is set), then #UD
should be generated even if CPL>0. This is according to Intel SDM Table 6-2:
"Priority Among Simultaneous Exceptions and Interrupts".

Note, that this may happen on the first DR access, even if the host does not
sets debug breakpoints. Obviously, it occurs when the host debugs the guest.

This patch moves the DR4/5 checks from __kvm_set_dr/_kvm_get_dr to handle_dr.
The emulator already checks DR4/5 availability in check_dr_read. Nested
virutalization related calls to kvm_set_dr/kvm_get_dr would not like to inject
exceptions to the guest.

As for SVM, the patch follows the previous logic as much as possible. Anyhow,
it appears the DR interception code might be buggy - even if the DR access
may cause an exception, the instruction is skipped.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When read access is performed using a readable code segment, the "conforming"
and "non-conforming" checks should not be done.  As a result, read using
non-conforming readable code segment fails.

This is according to Intel SDM 5.6.1 ("Accessing Data in Code Segments").

The fix is not to perform the "non-conforming" checks if the access is not a
fetch; the relevant checks are already done when loading the segment.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

DR7.LE should be cleared during task-switch. This feature is poorly documented.
For reference, see:
http://pdos.csail.mit.edu/6.828/2005/readings/i386/s12_02.htm

SDM [17.2.4]:
  This feature is not supported in the P6 family processors, later IA-32
  processors, and Intel 64 processors.

AMD [2:13.1.1.4]:
  This bit is ignored by implementations of the AMD64 architecture.

Intel's formulation could mean that it isn't even zeroed, but current
hardware indeed does not behave like that.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In long-mode, when the address size is 4 bytes, the linear address is not
truncated as the emulator mistakenly does.  Instead, the offset within the
segment (the ea field) should be truncated according to the address size.

As Intel SDM says: "In 64-bit mode, the effective address components are added
and the effective address is truncated ... before adding the full 64-bit
segment base."
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel SDM 17.2.4 (Debug Control Register (DR7)) says: "The processor clears the
GD flag upon entering to the debug exception handler." This sentence may be
misunderstood as if it happens only on #DB due to debug-register protection,
but it happens regardless to the cause of the #DB.

Fix the behavior to match both real hardware and Bochs.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM does not deliver x2APIC broadcast messages with physical mode.  Intel SDM
(10.12.9 ICR Operation in x2APIC Mode) states: "A destination ID value of
FFFF_FFFFH is used for broadcast of interrupts in both logical destination and
physical destination modes."

In addition, the local-apic enables cluster mode broadcast. As Intel SDM
10.6.2.2 says: "Broadcast to all local APICs is achieved by setting all
destination bits to one." This patch enables cluster mode broadcast.

The fix tries to combine broadcast in different modes through a unified code.

One rare case occurs when the source of IPI has its APIC disabled.  In such
case, the source can still issue IPIs, but since the source is not obliged to
have the same LAPIC mode as the enabled ones, we cannot rely on it.
Since it is a rare case, it is unoptimized and done on the slow-path.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NWanpeng Li <wanpeng.li@linux.intel.com>
[As per Radim's review, use unsigned int for X2APIC_BROADCAST, return bool from
 kvm_apic_broadcast. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

CR4.TSD is guest-owned; don't trap writes to it in VMX guests.  This
avoids a VM exit on context switches into or out of a PR_TSC_SIGSEGV
task.

I think that this fixes an unintentional side-effect of:
    4c38609a KVM: VMX: Make guest cr4 mask more conservative
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the operand size is not 64-bit, then the sysexit instruction should assign
ECX to RSP and EDX to RIP.  The current code assigns the full 64-bits.

Fix it by masking.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In 64-bit, stack operations default to 64-bits, but can be overriden (to
16-bit) using opsize override prefix. In contrast, near-branches are always
64-bit.  This patch distinguish between the different behaviors.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Breaking grp45 to the relevant functions to speed up the emulation and simplify
the code. In addition, it is necassary the next patch will distinguish between
far and near branches according to the flags.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace the current canonical address check with the new function which is
identical.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The two callers have a lot of constant arguments that can be
optimized out.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Several important fixes went in between 3.18-rc1 and 3.18-rc3, so
KVM/x86 work for 3.19 will be based on 3.18-rc3.

Pull MTD fixes from Brian Norris:
 "Three main MTD fixes for 3.18:

   - A regression from 3.16 which was noticed in 3.17.  With the
     restructuring of the m25p80.c driver and the SPI NOR library
     framework, we omitted proper listing of the SPI device IDs.  This
     means m25p80.c wouldn't auto-load (modprobe) properly when built as
     a module.  For now, we duplicate the device IDs into both modules.

   - The OMAP / ELM modules were depending on an implicit link ordering.
     Use deferred probing so that the new link order (in 3.18-rc) can
     still allow for successful probing.

   - Fix suspend/resume support for LH28F640BF NOR flash"

* tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd:
  mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips
  mtd: omap: fix mtd devices not showing up
  mtd: m25p80,spi-nor: Fix module aliases for m25p80
  mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id
  mtd: m25p80: get rid of spi_get_device_id

Pull SCSI fixes from James Bottomley:
 "This is a set of six patches consisting of:
   - two MAINTAINER updates
   - two scsi-mq fixs for the old parallel interface (not every request
     is tagged and we need to set the right flags to populate the SPI
     tag message)
   - a fix for a memory leak in scatterlist traversal caused by a
     preallocation update in 3.17
   - an ipv6 fix for cxgbi"

[ The scatterlist fix also came in separately through the block layer tree ]

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: ufs - remove self
  MAINTAINERS: change hpsa and cciss maintainer
  libcxgbi : support ipv6 address host_param
  scsi: set REQ_QUEUE for the blk-mq case
  Revert "block: all blk-mq requests are tagged"
  lib/scatterlist: fix memory leak with scsi-mq

Pull drm fixes from Dave Airlie:
 "Nothing too astounding or major: radeon, i915, vmwgfx, armada and
  exynos.

  Biggest ones:
   - vmwgfx has one big locking regression fix
   - i915 has come displayport fixes
   - radeon has some stability and a memory alloc failure
   - armada and exynos have some vblank fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits)
  drm/exynos: correct connector->dpms field before resuming
  drm/exynos: enable vblank after DPMS on
  drm/exynos: init kms poll at the end of initialization
  drm/exynos: propagate plane initialization errors
  drm/exynos: vidi: fix build warning
  drm/exynos: remove explicit encoder/connector de-initialization
  drm/exynos: init vblank with real number of crtcs
  drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size.
  drm/vmwgfx: Fix hash key computation
  drm/vmwgfx: fix lock breakage
  drm/i915/dp: only use training pattern 3 on platforms that support it
  drm/radeon: remove some buggy dead code
  drm/i915: Ignore VBT backlight check on Macbook 2, 1
  drm/radeon: remove invalid pci id
  drm/radeon: dpm fixes for asrock systems
  radeon: clean up coding style differences in radeon_get_bios()
  drm/radeon: Use drm_malloc_ab instead of kmalloc_array
  drm/radeon/dpm: disable ulv support on SI
  drm/i915: Fix GMBUSFREQ on vlv/chv
  drm/i915: Ignore long hpds on eDP ports
  ...

Pull ARM fixes from Russell King:
 - add the new bpf syscall to ARM.
 - drop a redundant return statement in __iommu_alloc_remap()
 - fix a performance issue noticed by Thomas Petazzoni with
   kmap_atomic().
 - fix an issue with the L2 cache OF parsing code which caused it to
   incorrectly print warnings on each boot, and make the warning text
   more consistent with the rest of the code

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn()
  ARM: 8183/1: l2c: Improve l2c310_of_parse() error message
  ARM: 8181/1: Drop extra return statement
  ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int'
  ARM: enable bpf syscall

Pull kvm fixes from Paolo Bonzini:
 "A small set of x86 fixes.  The most serious is an SRCU lockdep fix.

  A bit late - needed some time to test the SRCU fix, which only came in
  on Friday"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: defer load of APIC access page address during reset
  KVM: nVMX: Disable preemption while reading from shadow VMCS
  KVM: x86: Fix far-jump to non-canonical check
  KVM: emulator: fix execution close to the segment limit
  KVM: emulator: fix error code for __linearize

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

This pull-request includes some bug fixes and code cleanups.
Especially, this fixes the bind failure issue occurred when it tries
to re-bind Exynos drm driver after unbound, and the modetest failure
issue incurred by not having a pair to vblank on and off requests.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: correct connector->dpms field before resuming
  drm/exynos: enable vblank after DPMS on
  drm/exynos: init kms poll at the end of initialization
  drm/exynos: propagate plane initialization errors
  drm/exynos: vidi: fix build warning
  drm/exynos: remove explicit encoder/connector de-initialization
  drm/exynos: init vblank with real number of crtcs

Pull VFS fixes from Al Viro:
 "A bunch of assorted fixes, most of them followups to overlayfs merge"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ovl: initialize ->is_cursor
  Return short read or 0 at end of a raw device, not EIO
  isofs: don't bother with ->d_op for normal case
  isofs_cmp(): we'll never see a dentry for . or ..
  overlayfs: fix lockdep misannotation
  ovl: fix check for cursor
  overlayfs: barriers for opening upper-layer directory
  rcu: Provide counterpart to rcu_dereference() for non-RCU situations
  staging: android: logger: Fix log corruption regression

The sk_prot is irda's own set of protocol handlers, so irda should
statically know what that function is anyway, without using an indirect
pointer.  And as it happens, we know *exactly* what that pointer is
statically: it's NULL, because irda doesn't define a disconnect
operation.

So calling that function is doubly wrong, and will just cause an oops.
Reported-by: NMartin Lang <mlg.hessigheim@gmail.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During system suspend after connector switch off its dpms field
is set to connector previous dpms state. To properly resume dpms field
should be set to its actual state (off) before resuming to previous dpms state.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Before DPMS off driver disables vblank.
It should be balanced by vblank enable after DPMS on.
The patch fixes issue with page_flip ioctl not being able
to acquire vblank counter introduced by patch:
drm: Always reject drm_vblank_get() after drm_vblank_off()
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HPD events can be generated by components even if drm_dev is not fully
initialized, to skip such events kms poll initialization should
be performed at the end of load callback followed directly by forced
connection detection.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In case of error during plane initialization load callback
incorrectly return success, this patch fixes it.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

encoder object isn't used anymore so remove it.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

All KMS objects are destroyed by drm_mode_config_cleanup in proper order
so component drivers should not care about it.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Initialization of vblank with MAX_CRTC caused attempts
to disabling vblanks for non-existing crtcs in case
drm used fewer crtcs. The patch fixes it.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Most call paths to vmx_vcpu_reset do not hold the SRCU lock.  Defer loading
the APIC access page to the next vmentry.

This avoids the following lockdep splat:

[ INFO: suspicious RCU usage. ]
3.18.0-rc2-test2+ #70 Not tainted
-------------------------------
include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-x86/2371:
 #0:  (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]

stack backtrace:
CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
 ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
 ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
Call Trace:
 [<ffffffff816f514f>] dump_stack+0x4e/0x71
 [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
 [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
 [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
 [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
 [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
 [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
 [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
 [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
 [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
 [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
 [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
 [<ffffffff8122ee45>] ? __fget+0x5/0x250
 [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
 [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
 [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
Reported-by: NTakashi Iwai <tiwai@suse.de>
Reported-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Fixes: 38b99173Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to access the shadow VMCS, we need to load it. At this point,
vmx->loaded_vmcs->vmcs and the actually loaded one start to differ. If
we now get preempted by Linux, vmx_vcpu_put and, on return, the
vmx_vcpu_load will work against the wrong vmcs. That can cause
copy_shadow_to_vmcs12 to corrupt the vmcs12 state.

Fix the issue by disabling preemption during the copy operation.
copy_vmcs12_to_shadow is safe from this issue as it is executed by
vmx_vcpu_run when preemption is already disabled before vmentry.

This bug is exposed by running Jailhouse within KVM on CPUs with
shadow VMCS support.  Jailhouse never expects an interrupt pending
vmexit, but the bug can cause it if, after copy_shadow_to_vmcs12
is preempted, the active VMCS happens to have the virtual interrupt
pending flag set in the CPU-based execution controls.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit d1442d85 ("KVM: x86: Handle errors when RIP is set during far
jumps") introduced a bug that caused the fix to be incomplete.  Due to
incorrect evaluation, far jump to segment with L bit cleared (i.e., 32-bit
segment) and RIP with any of the high bits set (i.e, RIP[63:32] != 0) set may
not trigger #GP.  As we know, this imposes a security problem.

In addition, the condition for two warnings was incorrect.

Fixes: d1442d85Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
[Add #ifdef CONFIG_X86_64 to avoid complaints of undefined behavior. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A critical 3.18 regression fix from Rob, (thanks!)
A fix to avoid advertizing modes we can't support from Sinclair
  (welcome Sinclair!)
and a fix for an incorrect  hash key computation from me that is
  completely harmless, but can wait 'til the next merge window if necessary.
  (I can't really bother stable with this one).

* 'vmwgfx-fixes-3.18' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size.
  drm/vmwgfx: Fix hash key computation
  drm/vmwgfx: fix lock breakage