Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 24 3月, 2014 2 次提交
  3. 07 3月, 2014 2 次提交
    • P
      powerpc: Delete old PrPMC 280/2800 support · 3c8464a9
      由 Paul Gortmaker 提交于 
      This processor/memory module was mostly used on ATCA blades and
before that, on cPCI blades.  It wasn't really user friendly, with
custom non u-boot bootloaders (powerboot/motload) and no real way
to recover corrupted boot flash (which was a common problem).

As such, it had its day back before the big ppc --> powerpc move
to device trees, and that was largely through commercial BSPs that
started to dry up around 2007.

Systems using one were largely in a "deploy and sustain" mode,
so interest in upgrading to new kernels in the field was nil.
Also, requiring 50A, 48V power supplies and a 2'x2'x2' ATCA
chassis largely rules out any hobbyist/enthusiast interest.

The point of all this, is that we might as well delete the in
kernel files relating to this platform.  No point in continuing
to build it via walking the defconfigs or via linux-next testing.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      3c8464a9
    • 송
      powerpc: : Kill CONFIG_MTD_PARTITIONS · 84744377
      由 송은봉 提交于 
      This patch removes CONFIG_MTD_PARTITIONS in config files for powerpc.
 Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b2.
Signed-off-by: NEunbong Song <eunb.song@samsung.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      84744377
  5. 15 1月, 2014 1 次提交
  7. 10 1月, 2014 1 次提交
    • S
      powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100 · be201981
      由 Stephen Chivers 提交于 
      Add support for the Motorola/Emerson MVME5100 Single Board Computer.

The MVME5100 is a 6U form factor VME64 computer with:

	- A single MPC7410 or MPC750 CPU
	- A HAWK Processor Host Bridge (CPU to PCI) and
	  MultiProcessor Interrupt Controller (MPIC)
	- Up to 500Mb of onboard memory
	- A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip
	- Two 16550 compatible UARTS
	- Two Intel E100 Fast Ethernets
	- Two PCI Mezzanine Card (PMC) Slots
	- PPCBug Firmware

The HAWK PHB/MPIC is compatible with the MPC10x devices.

There is no onboard disk support. This is usually provided by installing a PMC
in first PMC slot.

This patch revives the board support, it was present in early 2.6
series kernels. The board support in those days was by Matt Porter of
MontaVista Software.

CSC Australia has around 31 of these boards in service. The kernel in use
for the boards is based on 2.6.31. The boards are operated without disks
from a file server.

This patch is based on linux-3.13-rc2 and has been boot tested.

Only boards with 512 Mb of memory are known to work.
Signed-off-by: NStephen Chivers <schivers@csc.com>
Tested-by: NAlessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: NScott Wood <scottwood@freescale.com>
      be201981
  9. 08 1月, 2014 2 次提交
  11. 10 12月, 2013 2 次提交
  13. 21 11月, 2013 1 次提交
  15. 30 10月, 2013 3 次提交
  17. 29 10月, 2013 3 次提交
  19. 24 8月, 2013 2 次提交
  21. 14 8月, 2013 2 次提交
  23. 08 8月, 2013 1 次提交
  25. 26 7月, 2013 1 次提交
  27. 02 7月, 2013 1 次提交
  29. 25 6月, 2013 3 次提交
  31. 20 6月, 2013 1 次提交
  33. 16 5月, 2013 1 次提交
  35. 18 4月, 2013 1 次提交
  37. 11 4月, 2013 1 次提交
  39. 10 4月, 2013 1 次提交
  41. 01 4月, 2013 1 次提交
  43. 19 3月, 2013 1 次提交
  45. 15 3月, 2013 1 次提交
  47. 13 3月, 2013 2 次提交
  49. 16 2月, 2013 1 次提交
  51. 15 2月, 2013 2 次提交