The previous code artificially limited writeback rate to 1000000
blocks/second (NSEC_PER_MSEC), which is a rate that can be met on fast
hardware.  The rate limiting code works fine (though with decreased
precision) up to 3 orders of magnitude faster, so use NSEC_PER_SEC.

Additionally, ensure that uint32_t is used as a type for rate throughout
the rate management so that type checking/clamp_t can work properly.

bch_next_delay should be rewritten for increased precision and better
handling of high rates and long sleep periods, but this is adequate for
now.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reported-by: NColy Li <colyli@suse.de>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This works in conjunction with the new PI controller.  Currently, in
real-world workloads, the rate controller attempts to write back 1
sector per second.  In practice, these minimum-rate writebacks are
between 4k and 60k in test scenarios, since bcache aggregates and
attempts to do contiguous writes and because filesystems on top of
bcachefs typically write 4k or more.

Previously, bcache used to guarantee to write at least once per second.
This means that the actual writeback rate would exceed the configured
amount by a factor of 8-120 or more.

This patch adjusts to be willing to sleep up to 2.5 seconds, and to
target writing 4k/second.  On the smallest writes, it will sleep 1
second like before, but many times it will sleep longer and load the
backing device less.  This keeps the loading on the cache and backing
device related to writeback more consistent when writing back at low
rates.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bcache uses a control system to attempt to keep the amount of dirty data
in cache at a user-configured level, while not responding excessively to
transients and variations in write rate.  Previously, the system was a
PD controller; but the output from it was integrated, turning the
Proportional term into an Integral term, and turning the Derivative term
into a crude Proportional term.  Performance of the controller has been
uneven in production, and it has tended to respond slowly, oscillate,
and overshoot.

This patch set replaces the current control system with an explicit PI
controller and tuning that should be correct for most hardware.  By
default, it attempts to write at a rate that would retire 1/40th of the
current excess blocks per second.  An integral term in turn works to
remove steady state errors.

IMO, this yields benefits in simplicity (removing weighted average
filtering, etc) and system performance.

Another small change is a tunable parameter is introduced to allow the
user to specify a minimum rate at which dirty blocks are retired.

There is a slight difference from earlier versions of the patch in
integral handling to prevent excessive negative integral windup.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If an IO operation fails, and we didn't successfully read data from the
cache, don't writeback invalid/partial data to the backing disk.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Parameter bio is no longer used, clean it.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Flag for bypass if the IO is for read-ahead or background, unless the
read-ahead request is for metadata (eg, from gfs2).
        Bypass if:
                bio->bi_opf & (REQ_RAHEAD|REQ_BACKGROUND) &&
			!(bio->bi_opf & REQ_META))

        Writeback if:
                op_is_sync(bio->bi_opf) ||
			bio->bi_opf & (REQ_META|REQ_PRIO)
Signed-off-by: NEric Wheeler <bcache@linux.ewheeler.net>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

set_capacity() has been called in bcache_device_init(),
remove the redundant one.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Reviewed-by: NEric Wheeler <bcache@linux.ewheeler.net>
Acked-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Current partition support of bcache is confusing and buggy. It tries to
trace non-continuous device minor numbers by an ida bit string, and
mistakenly mixed bcache device index with minor numbers. This design
generates several negative results,
- Index of bcache device name is not consecutive under /dev/. If there are
  3 bcache devices, they name will be,
  /dev/bcache0, /dev/bcache16, /dev/bcache32
  Only bcache code indexes bcache device name is such an interesting way.
- First minor number of each bcache device is traced by ida bit string.
  One bcache device will occupy 16 bits, this is not a good idea. Indeed
  only one bit is enough.
- Because minor number and bcache device index are mixed, a device index
  is allocated by ida_simple_get(), but an first minor number is sent into
  ida_simple_remove() to release the device. It confused original author
  too.

Root cause of the above errors is, bcache code should not handle device
minor numbers at all! A standard process to support multiple partitions in
Linux kernel is,
- Device driver provides major device number, and indexes multiple device
  instances.
- Device driver does not allocat nor trace device minor number, only
  provides a first minor number of a given device instance, and sets how
  many minor numbers (paritions) the device instance may have.
All rested stuffs are handled by block layer code, most of the details can
be found from block/{genhd, partition-generic}.c files.

This patch re-writes multiple partitions support for bcache. It makes
whole things to be more clear, and uses ida bit string in a more efficeint
way.
- Ida bit string only traces bcache device index, not minor number. For a
  bcache device with 128 partitions, only one bit in ida bit string is
  enough.
- Device minor number and device index are separated in concept. Device
  index is used for /dev node naming, and ida bit string trace. Minor
  number is calculated from device index and only used to initialize
  first_minor of a bcache device.
- It does not follow any standard for 16 partitions on a bcache device.
  This patch sets 128 partitions on single bcache device at max, this is
  the limitation from GPT (GUID Partition Table) and supported by fdisk.

Considering a typical device minor number is 20 bits width, each bcache
device may have 128 partitions (7 bits), there can be 8192 bcache devices
existing on system. For most common deployment for a single server in
now days, it should be enough.

[minor spelling fixes in commit message by Michael Lyle]
Signed-off-by: NColy Li <colyli@suse.de>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Code comments in alloc.c:bch_alloc_sectors() mentions a function
name find_data_bucket(), the correct function name should be
pick_data_bucket() indeed. bch_alloc_sectors() is a quite important
function in bcache allocation code, fixing the typo may help
other people to have less confusion.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In bcache code, sysfs entries are created before all resources get
allocated, e.g. allocation thread of a cache set.

There is posibility for NULL pointer deference if a resource is accessed
but which is not initialized yet. Indeed Jorg Bornschein catches one on
cache set allocation thread and gets a kernel oops.

The reason for this bug is, when bch_bucket_alloc() is called during
cache set registration and attaching, ca->alloc_thread is not properly
allocated and initialized yet, call wake_up_process() on ca->alloc_thread
triggers NULL pointer deference failure. A simple and fast fix is, before
waking up ca->alloc_thread, checking whether it is allocated, and only
wake up ca->alloc_thread when it is not NULL.
Signed-off-by: NColy Li <colyli@suse.de>
Reported-by: NJorg Bornschein <jb@capsec.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fixes below error with clang:
../drivers/md/bcache/sysfs.c:759:3: error: function definition is not allowed here
                {       return *((uint16_t *) r) - *((uint16_t *) l); }
                ^
../drivers/md/bcache/sysfs.c:789:32: error: use of undeclared identifier 'cmp'
                sort(p, n, sizeof(uint16_t), cmp, NULL);
                                             ^
2 errors generated.

v2:
rename function to __bch_cache_cmp
Signed-off-by: NPeter Foley <pefoley2@pefoley.com>
Reviewed-by: NColy Li <colyli@suse.de>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch is the followup of the prvious patch:
[writeback: schedule periodic writeback with sysctl].

There's another issue to fix.
For example,
- When the tunable was set to one hour and is reset to one second, the
  new setting will not take effect for up to one hour.

Kicking the flusher threads immediately fixes it.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This parameter provide an option to disable io scheduler when nullb*
in multi-queue mode.
Signed-off-by: Nweiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

update the range of submits_queues, and correct usage hints.
Signed-off-by: Nweiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Christoph correctly points out that this issue is no different
for other block devices, and poking at cross layer internals
is not the right way to solve it.

This reverts commit bb6aa6f0.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Implement a generic path for sending sync I/O on LightNVM. This allows
to reuse the standard synchronous path trough blk_execute_rq(), instead
of implementing a wait_for_completion on the target side (e.g., pblk).
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make LightNVM passhtrough commands fail fast. User space will then take
care of re-submitting.

Fixes: 84d4add7 ('lightnvm: add ioctls for vector I/Os')
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The amount of GC I/O on the write buffer is managed by the rate-limiter,
which is calculated as a function of the number of available free
blocks. When reaching the stable point, we risk having scheduled more
I/Os for GC than are allowed on the write buffer. This would result on
the GC semaphore balancing the outstanding read GC I/Os to be reported
as "hung", though the behavior is normal.

Solve this by allowing to schedule when we detect that the read GC path
is not moving forward.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Cleanup up unused and static functions across the whole codebase.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Lockdep complains about being in atomic context while freeing line
metadata - and rightly so as we take a spinlock and end up calling
vfree that might sleep(in pblk_mfree).

There is no need for holding the line manager free_lock while
freeing line metadata as the pipeline as stopped, so remove the lock.

Fixes: 588726d3 ("lightnvm: pblk: fail gracefully on irrec. error")
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

During garbage collect, lbas being written can end up
being invalidated. Make sure that this is reflected in
the valid lba count.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Finish garbage collect of the lines that are in the gc pipeline
before exiting. Ensure that all lines already in in the pipeline
goes through, from read to write.

Do this by keeping track of how many lines are in the pipeline
and waiting for that number to reach zero before exiting the gc
reader task.

Since we're adding a new gc line counter, change the name of
inflight_gc to read_inflight_gc to make the distinction clear.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Print the CRC of the logical-to-physical mapping during exit and
after recovering the L2P table to facilitate detection of meta
data corruption/recovery issues.

The CRC printed after recovery should match the CRC printed during
the previous exit - if it doesn't this indicates that either the meta
data written to the disk is corrupt or recovery failed.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Shut down the GC workqueues and tasks in the right order.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When recovering lines we need to consider that bad blocks in a line
affect the emeta area size.

Previously it was assumed that the emeta area would grow by the
number of sectors per page * number of bad blocks in the line.

This assumption is not correct - the number of "extra" pages that are
consumed could be both smaller (depending on emeta size) and bigger
(depending on the placement of the bad blocks).

Fix this by calculating the emeta start by iterating backwards
through the line, skipping ppas that map to bad blocks.

Also fix the data types used for ppa indices/counts in
pblk_recov_l2p_from_emeta - we should use u64.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Start GC if needed, directly after init, as we might
need to garbage collect in order to make room for user writes.

Create a helper function that allows to kick GC without exposing the
internals of the GC/rate-limiter interaction.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When rebuilding the L2P table, any full lines (lines without any
valid sectors) will be identified. If these lines are not freed,
we risk not being able to allocate the first data line.

This patch refactors the part of GC that frees empty lines
into a separate function and adds a call to this after the
L2P table has been rebuilt.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When recovering partially written lines, the valid sector
count must be decreased by the number of padded sectors
in the line.

Update line recovery to take all ADDR_EMPTY(padded) sectors
into account.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

GC can be kicked after it has been shut down when closing the last
line during exit, resulting in accesses to freed structures.

Make sure that GC is not triggered while it is not operational.
Also make sure that GC won't be re-activated during exit when
running on another processor by using timer_del_sync.
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If pblk_core_init fails lets destroy all global caches.
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We already pass the structure pointer so no need to pass the member.
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Not all exported symbols are being used outside core and there were
some stale entries in lightnvm.h
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

vblk isn't being used anyway and if we ever have a usecase we can
introduce this again.  This makes the logic easier and removes
unnecessary checks.
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pblk_line_gc_list seems to had a bug since the introduction of pblk in
getting GC list for a line. In b20ba1bc while redesigning the GC
algorithm, the naming for the GC thresholds was altered, but the
values for high_thrs and mid_thrs were not. The result is that when
moving to the GC lists, the mid threshold is never evaluated.

Fixes: a4bd217b("lightnvm: physical block device (pblk) target")
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make sure that the variable controlling block threshold for allocating
extra metadata sectors in case of a line with bad blocks does not get a
negative value. Otherwise, the line will be marked as corrupted and
wasted.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Metadata I/Os are scheduled to minimize their impact on user data I/Os.
When there are enough LUNs instantiated (i.e., enough bandwidth), it is
easy to interleave metadata and data one after the other so that
metadata I/Os are the ones being blocked and not vice-versa.

We do this by calculating the distance between the I/Os in terms of the
LUNs that are not in used, and selecting a free LUN that satisfies a
the simple heuristic that metadata is scheduled behind. The per-LUN
semaphores guarantee consistency. This works fine on >1 LUN
configuration. However, when a single LUN is instantiated, this design
leads to a deadlock, where metadata waits to be scheduled on a free LUN.

This patch implements the 1 LUN case by simply scheduling the metadada
I/O after the data I/O. In the process, we refactor the way a line is
replaced to ensure that metadata writes are submitted after data writes
in order to guarantee block sequentiality. Note that, since there is
only one LUN, both I/Os will block each other by design. However, such
configuration only pursues tight read latencies, not write bandwidth.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

pblk schedules user I/O, metadata I/O and erases on the write path in
order to minimize collisions at the media level. Until now, there has
been a dependency between user and metadata I/Os that could lead to a
deadlock as both take the per-LUN semaphore to schedule submission.

This path removes this dependency and guarantees forward progress at a
per I/O granurality.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A partial read I/O in pblk is an I/O where some sectors reside in the
write buffer in main memory and some are persisted on the device. Such
an I/O must at least contain 2 lbas, therefore checking for the case
where a single lba is mapped is not necessary.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When a line is recycled during garbage collection, reads can still be
issued to the line. If the line is freed in the middle of this process,
data corruption might occur.

This patch guarantees that lines are not freed in the middle of reads
that target them (lines). Specifically, we use the existing line
reference to decide when a line is eligible for being freed after the
recycle process.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>