Use eth_hw_addr_random() to set a random dev_addr and update
addr_assign_type instead of open-coding it.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a Kconfig option: CONFIG_TIGON3_HWMON which allows to build
in/out support for thermal sensors reported by Tigon3 NICs.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thomas Petazzoni says:

====================
net: mvpp2: add initial support for PPv2.2

The goal of this patch series is to add basic support for PPv2.2 in
the existing mvpp2 driver. mvpp2 currently supported the PPv2.1
version of the IP, used in the 32 bits Marvell Armada 375 SoC. PPv2.2
is an evolution of this IP block, used in the 64 bits Marvell Armada
7K/8K SoCs.

In order to ease the review, the introduction of PPv2.2 support has
been made into multiple small commits, with the final commit adding
the compatible string that makes the PPv2.2 support actually
usable. The series remain fully bisectable.

People interested in testing the code will find the full series (plus
a few Device Tree patches) at:

  https://github.com/MISL-EBU-System-SW/mainline-public/tree/4.11/mvpp2.2-support-v3

I'd like to thank Stefan Chulski and Marcin Wojtas, who helped me a
lot in the development of this patch series, by reviewing the patches,
and giving lots of useful hints to debug the driver on PPv2.2. Thanks
as well to Russell King for reviewing previous iterations of this
series, and providing suggestions and fixes.

Changes between v2 and v3:

 - Rebased on v4.11-rc1.

 - Add patch "net: mvpp2: fix DMA address calculation in
   mvpp2_txq_inc_put()", to properly take into account the "packet
   offset" field of the TX descriptors. Without this, we were getting
   DMA_API_DEBUG warnings that we are unmapping DMA mappings with a
   non-mapped DMA address.

 - In patch "net: mvpp2: add and use accessors for TX/RX descriptors",
   add a function named mvpp2_txdesc_offset_get(), which is needed for
   the DMA address calculation fix.

 - In patch "net: mvpp2: add and use accessors for TX/RX descriptors",
   fix the calculation of tx_desc physical address and packet offset
   in mvpp2_tx_frag_process(). The offset was assigned into the buffer
   physical address, and the physical address to the packet offset,
   which meant the fragment process was completely broken.

 - In patch "net: mvpp2: adjust the allocation/free of BM pools for
   PPv2.2" fix how MVPP22_BM_ADDR_HIGH_VIRT_RLS_MASK is used. This
   mask is already shifted. So the value should be shifted before
   being masked and not the opposite.

 - Add a new patch "net: mvpp2: set dma mask and coherent dma mask on
   PPv2.2", to set the DMA mask and DMA coherent mask. By setting the
   DMA mask to 40 bits we avoid using bounce buffers when network
   packets are above the 4 GB limit. The coherent mask remains set to
   32 bits, because the BM pools must all have the same high 32 bits
   in their addresses.

 - Use "dma" instead of "phys" where appropriate, as suggested by
   Russell King.

 - Use the "cookie" field of the RX descriptor to store the physical
   address instead of the virtual address, and then use phys_to_virt()
   to get the virtual address. This allows to work around the limit
   that the "cookie" field only has 40 bits, which is not sufficient
   to store a virtual address on 64 bits platforms. This was suggested
   by Russell King.

   As part of this change, also got rid of all the compile time
   conditionals on CONFIG_ARCH_DMA_ADDR_T_64BIT, to get better
   compile-time coverage.

 - In patch "net: mvpp2: handle misc PPv2.1/PPv2.2 differences":

    * Instead of calling mvpp21_port_power_up(port) only on PPv2.1,
      remove this function, and call its relevant parts directly from
      ->probe(). Only mvpp2_port_fc_adv_enable() is PPv2.1
      specific. Reported by Russell King.

    * Add a mvpp22_port_mii_set() function that properly initializes
      SGMII support on PPv2.2. Code provided by Russell King.

 - In patch "net: mvpp2: handle register mapping and access for PPv2.2":

    * Adjust the code to match the change of the DT binding in terms
      of mapping the second register area on PPv2.2.

    * Rework the register accessors to remove the get_cpu()/put_cpu(),
      and instead use separate accessors for global registers
      vs. per-CPU registers.

 - Add a few new patches removing dead/unused/useless code:

   net: mvpp2: remove support for buffer header
   net: mvpp2: remove unused register definition MVPP2_TXQ_THRESH_REG
   net: mvpp2: remove mvpp2_txq_pend_desc_num_get() function

 - Fix a number of checkpatch warnings.

Changes between v1 and v2:

 - Made a separate series from the set of patches doing preparation
   changes/fixes to the mvpp2 driver.

 - Rebased on top of v4.10-rc1.

 - Update Kconfig text of the mvpp2 driver to mention the support for
   Armada 7K and 8K (PPv2.2).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that the mvpp2 driver has been modified to accommodate the support
for PPv2.2, we can finally advertise this support by adding the
appropriate compatible string.

At the same time, we update the Kconfig description of the MVPP2 driver.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On PPv2.2, the streaming mappings can be anywhere in the first 40 bits
of the physical address space. However, for the coherent mappings, we
still need them to be in the first 32 bits of the address space,
because all BM pools share a single register to store the high 32 bits
of the BM pool address, which means all BM pools must be allocated in
the same 4GB memory area.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PPv2.2 variant of the network controller needs an additional
clock, the "MG clock" in order for the IP block to operate
properly. This commit adds support for this additional clock to the
driver, reworking as needed the error handling path.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In PPv2.1, we have a maximum of 8 RXQs per port, with a default of 4
RXQs per port, and we were assigning RXQs 0->3 to the first port, 4->7
to the second port, 8->11 to the third port, etc.

In PPv2.2, we have a maximum of 32 RXQs per port, and we must allocate
RXQs from the range of 32 RXQs available for each port. So port 0 must
use RXQs in the range 0->31, port 1 in the range 32->63, etc.

This commit adapts the mvpp2 to this difference between PPv2.1 and
PPv2.2:

 - The constant definition MVPP2_MAX_RXQ is replaced by a new field
   'max_port_rxqs' in 'struct mvpp2', which stores the maximum number of
   RXQs per port. This field is initialized during ->probe() depending
   on the IP version.

 - MVPP2_RXQ_TOTAL_NUM is removed, and instead we calculate the total
   number of RXQs by multiplying the number of ports by the maximum of
   RXQs per port. This was anyway used in only one place.

 - In mvpp2_port_probe(), the calculation of port->first_rxq is adjusted
   to cope with the different allocation strategy between PPv2.1 and
   PPv2.2. Due to this change, the 'next_first_rxq' argument of this
   function is no longer needed and is removed.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit adjusts how the MVPP2_ISR_RXQ_GROUP_REG register is
configured, since it changed between PPv2.1 and PPv2.2.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PPv2.2 unit is connected to an AXI bus on Armada 7K/8K, so this
commit adds the necessary initialization of the AXI bridge.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit handles a few miscellaneous differences between PPv2.1 and
PPv2.2 in different areas, where code done for PPv2.1 doesn't apply for
PPv2.2 or needs to be adjusted (getting the MAC address, disabling PHY
polling, etc.).

Thanks to Russell King for providing the initial implementation of
mvpp22_port_mii_set().
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit adjusts the mvpp2 driver register mapping and access logic
to support PPv2.2, to handle a number of differences.

Due to how the registers are laid out in memory, the Device Tree binding
for the "reg" property is different:

 - On PPv2.1, we had a first area for the packet processor
   registers (common to all ports), and then one area per port.

 - On PPv2.2, we have a first area for the packet processor
   registers (common to all ports), and a second area for numerous other
   registers, including a large number of per-port registers

In addition, on PPv2.2, the area for the common registers is split into
so-called "address spaces" of 64 KB each. They allow to access per-CPU
registers, where each CPU has its own copy of some registers. A few
other registers, which have a single copy, also need to be accessed from
those per-CPU windows if they are related to a per-CPU register. For
example:

  - Writing to MVPP2_TXQ_NUM_REG selects a TX queue. This register is a
    per-CPU register, it must be accessed from the current CPU register
    window.

  - Then a write to MVPP2_TXQ_PENDING_REG, MVPP2_TXQ_DESC_ADDR_REG (and
    a few others) will affect the TX queue that was selected by the
    write to MVPP2_TXQ_NUM_REG. It must be accessed from the same CPU
    window as the write to the TXQ_NUM_REG.

Therefore, the ->base member of 'struct mvpp2' is replaced with a
->cpu_base[] array, each entry pointing to a mapping of the per-CPU
area. Since PPv2.1 doesn't have this concept of per-CPU windows, all
entries in ->cpu_base[] point to the same io-remapped area.

The existing mvpp2_read() and mvpp2_write() accessors use cpu_base[0],
they are used for registers for which the CPU window doesn't matter.

mvpp2_percpu_read() and mvpp2_percpu_write() are new accessors added to
access the registers for which the CPU window does matter, which is why
they take a "cpu" as argument.

The driver is then changed to use mvpp2_percpu_read() and
mvpp2_percpu_write() where it matters.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In PPv2.2, the MVPP2_RXQ_DESC_ADDR_REG and MVPP2_TXQ_DESC_ADDR_REG
registers have a slightly different layout, because they need to contain
a 64-bit address for the RX and TX descriptor arrays. This commit
adjusts those functions accordingly.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit modifies the mvpp2_defaults_set() function to not do the
loopback and FIFO threshold initialization, which are not needed for
PPv2.2.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MVPP2_RXQ_CONFIG_REG register has a slightly different layout
between PPv2.1 and PPv2.2, so this commit adapts the functions modifying
this register to accommodate for both the PPv2.1 and PPv2.2 cases.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit adjusts the allocation and freeing of BM pools to support
PPv2.2. This involves:

 - Checking that the number of buffer pointers is a multiple of 16, as
   required by the hardware.

 - Adjusting the size of the DMA coherent area allocated for buffer
   pointers. Indeed, PPv2.2 needs space for 2 pointers of 64-bits per
   buffer, as opposed to 2 pointers of 32-bits per buffer in
   PPv2.1. The size in bytes is now stored in a new field of the
   mvpp2_bm_pool structure.

 - On PPv2.2, getting the DMA address and cookie (used for the physical
   address) of each buffer requires reading the
   MVPP22_BM_ADDR_HIGH_ALLOC to get the high order bits of those
   addresses. A new utility function mvpp2_bm_bufs_get_addrs() is
   introduced to handle this.

 - On PPv2.2, releasing a buffer requires writing the high order 32 bits
   of the DMA address and cookie to MVPP22_BM_PHY_VIRT_HIGH_RLS_REG.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit adds the definition of the PPv2.2 HW descriptors, adjusts
the mvpp2_tx_desc and mvpp2_rx_desc structures accordingly, and adapts
the accessors to work on both PPv2.1 and PPv2.2.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the format of the HW descriptors is different between PPv2.1 and
PPv2.2, this commit introduces an intermediate union, with for now
only the PPv2.1 descriptors. The bulk of the driver code only
manipulates opaque mvpp2_tx_desc and mvpp2_rx_desc pointers, and the
descriptors can only be accessed and modified through the accessor
functions. A follow-up commit will add the descriptor definitions for
PPv2.2.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation to the introduction for the support of PPv2.2 in the
mvpp2 driver, this commit adds a hw_version field to the struct
mvpp2, and uses the .data field of the DT match table to fill it in.

Having the MVPP21 and MVPP22 definitions available will allow to start
adding the necessary conditional code to support PPv2.2.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PPv2.2 IP has a different TX and RX descriptor layout compared to
PPv2.1. In order to prepare for the introduction of PPv2.2 support in
mvpp2, this commit adds accessors for the different fields of the TX
and RX descriptors, and changes the code to use them.

For now, the mvpp2_port argument passed to the accessors is not used,
but it will be used in follow-up to update the descriptor according to
the version of the IP being used.

Apart from the mechanical changes to use the newly introduced
accessors, a few other changes, needed to use the accessors, are made:

 - The mvpp2_txq_inc_put() function now takes a mvpp2_port as first
   argument, as it is needed to use the accessors.

 - Similarly, the mvpp2_bm_cookie_build() gains a mvpp2_port first
   argument, for the same reason.

 - In mvpp2_rx_error(), instead of accessing the RX descriptor in each
   case of the switch, we introduce a local variable to store the
   packet size.

 - In mvpp2_tx_frag_process() and mvpp2_tx() instead of accessing the
   packet size from the TX descriptor, we use the actual value
   available in the function, which is used to set the TX descriptor
   packet size a few lines before.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The RX descriptors of the PPv2 hardware allow to store several
information, amongst which:

 - the DMA address of the buffer in which the data has been received
 - a "cookie" field, left to the use of the driver, and not used by the
   hardware

In the current implementation, the "cookie" field is used to store the
virtual address of the buffer, so that in the receive completion path,
we can easily get the virtual address of the buffer that corresponds to
a completed RX descriptors.

On PPv2.1, used on 32-bit platforms, those two fields are 32-bit wide,
which is enough to store a DMA address in the first field, and a virtual
address in the second field.

On PPv2.2, used on 64-bit platforms, these two fields have been extended
to 40 bits. While 40 bits is enough to store a DMA address (as long as
the DMA mask is 40 bits or lower), it is not enough to store a virtual
address. Therefore, the "cookie" field can no longer be used to store
the virtual address of the buffer.

However, as Russell King pointed out, the RX buffers are always
allocated in the kernel linear mapping, and therefore using
phys_to_virt() on the physical address of the RX buffer is possible and
correct.

Therefore, this commit changes the driver to use the "cookie" field to
store the physical address instead of the virtual
address. phys_to_virt() is used in the receive completion path to
retrieve the virtual address from the physical address.

It is obviously important to realize that the DMA address and physical
address are two different things, which is why we store both in the RX
descriptors. While those addresses may be identical in some situations,
it remains two distinct concepts, and both addresses should be handled
separately.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mvpp2_txq_pend_desc_num_get() function only selects a TX queue, and
reads the number of pending descriptors. It is used in only one place,
in mvpp2_txq_clean(), where the TX queue has already been selected by a
write to MVPP2_TXQ_NUM_REG.

Therefore, this function is useless, and the caller can simply read the
value of the MVPP2_TXQ_PENDING_REG register instead.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This register is no longer used since commit edc660fa ("net: mvpp2:
replace TX coalescing interrupts with hrtimer").
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The "buffer header" functionality is a functionality used by the
hardware to split an incoming packets over multiple BM buffers if they
are not large enough. However, the mvpp2 driver guarantees that a pool
of BM buffers has buffers with a size large enough to store MTU-sized
packets. Therefore, this functionality is completely unused, and the
code can be removed, and we should never get a descriptor with bit
MVPP2_RXD_BUF_HDR set.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As indicated by Russell King, the mvpp2 driver currently uses a lot
"phys" or "phys_addr" to store what really is a DMA address. This commit
clarifies this by using "dma" or "dma_addr" where appropriate.

This is especially important as we are going to introduce more changes
where the distinction between physical address and DMA address will be
key.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Marvell PPv2 Device Tree binding was so far only used to describe
the PPv2.1 network controller, used in the Marvell Armada 375.

A new version of this IP block, PPv2.2 is used in the Marvell Armada
7K/8K processor. This commit extends the existing binding so that it can
also be used to describe PPv2.2 hardware.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
mlx4: order-0 allocations and page recycling

As mentioned half a year ago, we better switch mlx4 driver to order-0
allocations and page recycling.

This reduces vulnerability surface thanks to better skb->truesize
tracking and provides better performance in most cases.
(33 Gbit for one TCP flow on my lab hosts)

I will provide for linux-4.13 a patch on top of this series,
trying to improve data locality as described in
https://www.spinics.net/lists/netdev/msg422258.html

v2 provides an ethtool -S new counter (rx_alloc_pages) and
code factorization, plus Tariq fix.

v3 includes various fixes based on Tariq tests and feedback
from Saeed and Tariq.

v4 rebased on net-next for inclusion in linux-4.12, as requested
by Tariq.

Worth noting this patch series deletes ~250 lines of code ;)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should keep one way to build skbs, regardless of GRO being on or off.

Note that I made sure to defer as much as possible the point we need to
pull data from the frame, so that future prefetch() we might add
are more effective.

These skb attributes derive from the CQE or ring :
 ip_summed, csum
 hash
 vlan offload
 hwtstamps
 queue_mapping

As a bonus, this patch removes mlx4 dependency on eth_get_headlen()
which is very often broken enough to give us headaches.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Testing a boolean in fast path is not worth duplicating
the code allocating packets, when GRO is on or off.

If this proves to be a problem, we might later use a jump label.

Next patch will remove this duplicated code and ease code review.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to compute the frame virtual address at different points.
Do it once.

Following patch will use the new va address for validate_loopback()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of fetching dma address from rx_desc->data[0].addr,
prefer using frags[0].dma + frags[0].page_offset to avoid
a potential cache line miss.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This new counter tracks number of pages that we allocated for one port.

lpaa24:~# ethtool -S eth0 | egrep 'rx_alloc_pages|rx_packets'
     rx_packets: 306755183
     rx_alloc_pages: 932897
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same technique than some Intel drivers, for arches where PAGE_SIZE = 4096

In most cases, pages are reused because they were consumed
before we could loop around the RX ring.

This brings back performance, and is even better,
a single TCP flow reaches 30Gbit on my hosts.

v2: added full memset() in mlx4_en_free_frag(), as Tariq found it was needed
if we switch to large MTU, as priv->log_rx_info can dynamically be changed.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use of order-3 pages is problematic in some cases.

This patch might add three kinds of regression :

1) a CPU performance regression, but we will add later page
recycling and performance should be back.

2) TCP receiver could grow its receive window slightly slower,
   because skb->len/skb->truesize ratio will decrease.
   This is mostly ok, we prefer being conservative to not risk OOM,
   and eventually tune TCP better in the future.
   This is consistent with other drivers using 2048 per ethernet frame.

3) Because we allocate one page per RX slot, we consume more
   memory for the ring buffers. XDP already had this constraint anyway.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We will soon use order-0 pages, and frag truesize will more precisely
match real sizes.

In the new model, we prefer to use <= 2048 bytes fragments, so that
we can use page-recycle technique on PAGE_SIZE=4096 arches.

We will still pack as much frames as possible on arches with big
pages, like PowerPC.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We only need to store the page and dma address.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need to duplicate it per RX queue / frags.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using per frag storage for frag_prefix_size is really silly.

mlx4_en_complete_rx_desc() has all needed info already.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is really a port attribute, no need to duplicate it per
RX queue and per frag.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need to duplicate it for all queues and frags.

num_frags & log_rx_info become u8 to save space.
u8 accesses are a bit faster than u16 anyway.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: cosmetics

Couple of cosmetic mlxsw patches
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>