- 23 2月, 2015 10 次提交
-
-
由 David Howells 提交于
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and socket files). d_is_reg() and d_is_special() are added to detect these subtypes and d_is_file() is left as the union of the two. This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to use d_is_reg(dentry) instead. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is a virtual dentry that covers another one in a lower layer that should be used instead. This may be recorded on medium if directory integration is stored there. The flag can be set with d_set_fallthru() and tested with d_is_fallthru(). Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function. A d_is_miss() accessor is also added for ordinary cache misses and d_is_negative() is modified to indicate either an ordinary miss or an enforced miss (whiteout). Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Introduce some function for getting the inode (and also the dentry) in an environment where layered/unioned filesystems are in operation. The problem is that we have places where we need *both* the union dentry and the lower source or workspace inode or dentry available, but we can only have a handle on one of them. Therefore we need to derive the handle to the other from that. The idea is to introduce an extra field in struct dentry that allows the union dentry to refer to and pin the lower dentry. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 2月, 2015 9 次提交
-
-
由 Al Viro 提交于
Merge branch 'overlayfs-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-next
-
由 David Howells 提交于
Code that does this: if (!(d_unhashed(tmp) && tmp->d_inode)) { ... simple_unlink(parent->d_inode, tmp); } is broken because: !(d_unhashed(tmp) && tmp->d_inode) is equivalent to: !d_unhashed(tmp) || !tmp->d_inode so it is possible to get into simple_unlink() with tmp->d_inode == NULL. simple_unlink(), however, assumes tmp->d_inode cannot be NULL. I think that what was meant is this: !d_unhashed(tmp) && tmp->d_inode and that the logical-not operator or the final close-bracket was misplaced. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Bryan O'Sullivan <bos@pathscale.com> cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Omar Sandoval 提交于
get_acl gets a reference which we must release in the error cases. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NOmar Sandoval <osandov@osandov.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Rasmus Villemoes 提交于
%pD for struct file*, %pd for struct dentry*. Fixes: a455589f ("assorted conversions to %p[dD]") Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Bastien Nocera 提交于
Signed-off-by: NBastien Nocera <hadess@hadess.net> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Kinglong Mee 提交于
Have defined pr_fmt as below in fs/aio.c, so remove duplicate function name in pr_debug message. #define pr_fmt(fmt) "%s: " fmt, __func__ Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Code that does this: if (!(d_unhashed(dentry) && dentry->d_inode)) { ... simple_unlink(parent->d_inode, dentry); } is broken because: !(d_unhashed(dentry) && dentry->d_inode) is equivalent to: !d_unhashed(dentry) || !dentry->d_inode so it is possible to get into simple_unlink() with dentry->d_inode == NULL. simple_unlink(), however, assumes dentry->d_inode cannot be NULL. I think that what was meant is this: !d_unhashed(dentry) && dentry->d_inode and that the logical-not operator or the final close-bracket was misplaced. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Joel Becker <joel.becker@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Only ->open() should be there (always failing, of course). We never replace ->f_op of an already opened struct file, so there's no way for any of those methods to be called. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 2月, 2015 21 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... so make it return void and drop the check for it being non-NULL Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Note that ll_prep_inode() in the latter does *not* modify ->d_inode; it expects non-negative dentry, and in such cases ll_prep_inode() doesn't modify *inode - it only uses the value. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking updates from David Miller: 1) Missing netlink attribute validation in nft_lookup, from Patrick McHardy. 2) Restrict ipv6 partial checksum handling to UDP, since that's the only case it works for. From Vlad Yasevich. 3) Clear out silly device table sentinal macros used by SSB and BCMA drivers. From Joe Perches. 4) Make sure the remote checksum code never creates a situation where the remote checksum is applied yet the tunneling metadata describing the remote checksum transformation is still present. Otherwise an external entity might see this and apply the checksum again. From Tom Herbert. 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire. 6) Don't explicitly initialize timer struct fields, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi Nomura. 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet. 9) Don't potentially perform skb_get() on shared skbs, also from Eric Dumazet. 10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin KaFai Lau. 11) Fix merge resolution error between the iov_iter changes in vhost and some bug fixes that occurred at the same time. From Jason Wang. 12) If rtnl_configure_link() fails we have to perform a call to ->dellink() before unregistering the device. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits) net: dsa: Set valid phy interface type rtnetlink: call ->dellink on failure when ->newlink exists com20020-pci: add support for eae single card vhost_net: fix wrong iter offset when setting number of buffers net: spelling fixes net/core: Fix warning while make xmldocs caused by dev.c net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081 ipv6: fix ipv6_cow_metrics for non DST_HOST case openvswitch: Fix key serialization. r8152: restore hw settings hso: fix rx parsing logic when skb allocation fails tcp: make sure skb is not shared before using skb_get() bridge: netfilter: Move sysctl-specific error code inside #ifdef ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc ipvlan: add a missing __percpu pcpu_stats tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one() bgmac: fix device initialization on Northstar SoCs (condition typo) qlcnic: Delete existing multicast MAC list before adding new net/mlx5_core: Fix configuration of log_uar_page_sz sunvnet: don't change gso data on clones ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md bugfixes from Neil Brown: "Three bug md fixes for 3.20 yet-another-livelock in raid5, and a problem with write errors to 4K-block devices" * tag 'md/3.20-fixes' of git://neil.brown.name/md: md/raid5: Fix livelock when array is both resyncing and degraded. md/raid10: round up to bdev_logical_block_size in narrow_write_error. md/raid1: round up to bdev_logical_block_size in narrow_write_error
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras由 Linus Torvalds 提交于
Pull mcelog regression fix from Tony Luck: "Fix regression - functions on the mce notifier chain should not be able to decide that an event should not be logged" * tag 'please-pull-fixmcelog' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Fix regression. All error records should report via /dev/mcelog
-
git://git.lwn.net/linux-2.6由 Linus Torvalds 提交于
Pull DocBook build fix from Jonathan Corbet: "Fix the DocBook build failure caused by the move of the i2o subsystem to the staging tree" * tag 'docs-fix' of git://git.lwn.net/linux-2.6: Fix docs build failure caused by i2o removal
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd bugfixes from Bruce Fields: "These are fixes for two bugs introduced during the merge window" * 'for-3.20' of git://linux-nfs.org/~bfields/linux: nfsd4: fix v3-less build nfsd: fix comparison in fh_fsid_match()
-
由 NeilBrown 提交于
Commit a7854487: md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write. Causes an RCW cycle to be forced even when the array is degraded. A degraded array cannot support RCW as that requires reading all data blocks, and one may be missing. Forcing an RCW when it is not possible causes a live-lock and the code spins, repeatedly deciding to do something that cannot succeed. So change the condition to only force RCW on non-degraded arrays. Reported-by: NManibalan P <pmanibalan@amiindia.co.in> Bisected-by: NJes Sorensen <Jes.Sorensen@redhat.com> Tested-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NNeilBrown <neilb@suse.de> Fixes: a7854487 Cc: stable@vger.kernel.org (v3.7+)
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull lazytime mount option support from Al Viro: "Lazytime stuff from tytso" * 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ext4: add optimization for the lazytime mount option vfs: add find_inode_nowait() function vfs: add support for a lazytime mount option
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull iov_iter updates from Al Viro: "More iov_iter work - missing counterpart of iov_iter_init() for bvec-backed ones and vfs_read_iter()/vfs_write_iter() - wrappers for sync calls of ->read_iter()/->write_iter()" * 'iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: add vfs_iter_{read,write} helpers new helper: iov_iter_bvec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull getname/putname updates from Al Viro: "Rework of getname/getname_kernel/etc., mostly from Paul Moore. Gets rid of quite a pile of kludges between namei and audit..." * 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: audit: replace getname()/putname() hacks with reference counters audit: fix filename matching in __audit_inode() and __audit_inode_child() audit: enable filename recording via getname_kernel() simpler calling conventions for filename_mountpoint() fs: create proper filename objects using getname_kernel() fs: rework getname_kernel to handle up to PATH_MAX sized filenames cut down the number of do_path_lookup() callers
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull debugfs patches from Al Viro: "debugfs patches, mostly to make it possible for something like tracefs to be transparently automounted on given directory in debugfs. New primitive in there is debugfs_create_automount(name, parent, func, arg), which creates a directory and makes its ->d_automount() return func(arg). Another missing primitive was debugfs_create_file_size() - open-coded in quite a few places. Dave's patch adds it and converts the open-code instances to calling it" * 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: debugfs: Provide a file creation function that also takes an initial size new primitive: debugfs_create_automount() debugfs: split end_creating() into success and failure cases debugfs: take mode-dependent parts of debugfs_get_inode() into callers fold debugfs_mknod() into callers fold debugfs_create() into caller fold debugfs_mkdir() into caller debugfs_mknod(): get rid useless arguments fold debugfs_link() into caller debugfs: kill __create_file() debugfs: split the beginning and the end of __create_file() off debugfs_{mkdir,create,link}(): get rid of redundant argument
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull misc VFS updates from Al Viro: "This cycle a lot of stuff sits on topical branches, so I'll be sending more or less one pull request per branch. This is the first pile; more to follow in a few. In this one are several misc commits from early in the cycle (before I went for separate branches), plus the rework of mntput/dput ordering on umount, switching to use of fs_pin instead of convoluted games in namespace_unlock()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch the IO-triggering parts of umount to fs_pin new fs_pin killing logics allow attaching fs_pin to a group not associated with some superblock get rid of the second argument of acct_kill() take count and rcu_head out of fs_pin dcache: let the dentry count go down to zero without taking d_lock pull bumping refcount into ->kill() kill pin_put() mode_t whack-a-mole: chelsio file->f_path.dentry is pinned down for as long as the file is open... get rid of lustre_dump_dentry() gut proc_register() a bit kill d_validate() ncpfs: get rid of d_validate() nonsense selinuxfs: don't open-code d_genocide()
-
由 Linus Torvalds 提交于
Merge yet more updates from Andrew Morton: - a pile of minor fs fixes and cleanups - kexec updates - random misc fixes in various places: vmcore, rbtree, eventfd, ipc, seccomp. - a series of python-based kgdb helper scripts * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) seccomp: cap SECCOMP_RET_ERRNO data to MAX_ERRNO samples/seccomp: improve label helper ipc,sem: use current->state helpers scripts/gdb: disable pagination while printing from breakpoint handler scripts/gdb: define maintainer scripts/gdb: convert CpuList to generator function scripts/gdb: convert ModuleList to generator function scripts/gdb: use a generator instead of iterator for task list scripts/gdb: ignore byte-compiled python files scripts/gdb: port to python3 / gdb7.7 scripts/gdb: add basic documentation scripts/gdb: add lx-lsmod command scripts/gdb: add class to iterate over CPU masks scripts/gdb: add lx_current convenience function scripts/gdb: add internal helper and convenience function for per-cpu lookup scripts/gdb: add get_gdbserver_type helper scripts/gdb: add internal helper and convenience function to retrieve thread_info scripts/gdb: add is_target_arch helper scripts/gdb: add helper and convenience function to look up tasks scripts/gdb: add task iteration class ...
-
由 Kees Cook 提交于
The value resulting from the SECCOMP_RET_DATA mask could exceed MAX_ERRNO when setting errno during a SECCOMP_RET_ERRNO filter action. This makes sure we have a reliable value being set, so that an invalid errno will not be ignored by userspace. Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NDmitry V. Levin <ldv@altlinux.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
Fixes a potential corruption with uninitialized stack memory in the seccomp BPF sample program. [akpm@linux-foundation.org: coding-style fixlet] Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NRobert Swiecki <swiecki@google.com> Tested-by: NRobert Swiecki <swiecki@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
Call __set_current_state() instead of assigning the new state directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping track of who changed the state. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kiszka 提交于
While reporting the (refreshed) list of modules on automatic updates we may hit the page boundary of the output console and cause a stop if pagination is enabled. However, gdb does not accept user input while running over the breakpoint handler. So we get stuck, and the user is forced to interrupt gdb. Resolve this by disabling pagination during automatic symbol updates. We restore the user's configuration once done. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kiszka 提交于
I'm proposing myself for keeping an eye on these scripts and integrating contributions. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-