Every time the console cursor blinks, we do a kmalloc/kfree pair.  This
patch turns that into a single allocation.

This allocation was the most frequent kmalloc I saw on my test box.

[adaplas]
Per Alan's suggestion, move global variables to fbcon's private structure.
This would also avoid resource leaks when fbcon is unloaded.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Uses the generic ddc read functionality in fbmon.c instead of the previous
functionality.
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update driver to use generic DDC reading

[khali@linux-fr.org: fix oops in i2c handling]
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Jurriaan <thunder7@xs4all.nl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update driver to use generic DDC reading
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update driver to use generic DDC reading
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update driver to use generic DDC reading
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Adds functionality to read the EDID information over the DDC bus in a generic
way.  This code is based on the DDC implementation in the radeon driver.

[adaplas]
- separate from fbmon.c and place in new file fb_ddc.c
- remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature
  will not compile if i2c support is compiled as a module
- feature is selectable only by drivers needing it. It must have a
  'select FB_DDC if xxx' in Kconfig
- change printk's to dev_*, the i2c people prefers it
Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The Kconfig help text doesnt mention that in order to load the vfb module, you
have to pass in the parameter vfb_enable=1

Document required module options in Kconfig for loading the vfb module.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

use (MIN/MAX)_LEVEL and FB_(UN)BLANK instead of the values they are defined to
Signed-off-by: NGuido Guenther <agx@sigxcpu.org>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correct sample boot line and add a remark on mode setting.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- add cursor enable/disable, very useful if you wish a full screen boot
  logo.

Cursor can be disabled from kernel command line:

   video=au1100fb:nocursor,panel:Toppoly_TD035STED4

or from sysfs interface:

   echo 1 > /sys/module/au1100fb/parameters/nocursor

- fix up some wrong indentation issues.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Git rid of the runtime warning about pcmcia not supporting exclusive IRQs,
so "the driver needs updating".
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow ide/pci/generic to claim chipsets as a a module or when built-in.  It
requires using "all_generic_ide" as a boot option.
Signed-off-by: NPatrick Jefferson <henj@hp.com>
Acked-by: NAlan Cox <alan@redhat.com>
Closes-Bug: 7017
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Michal Miroslaw reported a problem (bugzilla #7023) where a user initiated
reset while the IDE layer was already resetting the channel caused a crash,
and provided a rough fix.

This is a slightly cleaner version of the fix which tracks the reset state
and blocks further reset requests while a reset is in progress.

Note this is not a security issue - random end users can't access the
ioctl in question anyway.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove some code which is unneeded if CONFIG_PM=n.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Few cards informations submitted by OpenZaurus users.

Seagate 8GB microdrive:
 product info: "SEAGATE", "ST1"
 manfid 0x0111, 0x0000

One CF card:
 product info: "SAMSUNG", "04/05/06", "", ""
 manfid : 0x0000, 0x0000

Ridata 8GB Pro 150X Compact Flash Card:
 product info: "SMI VENDOR", "SMI PRODUCT", ""
 manfid: 0x000a, 0x0000

 product info: "M-Systems", "CF500", ""
 manfid: 0x000a, 0x0000

 product info: "TRANSCEND", "TS4GCF120", ""
 manfid: 0x000a, 0x0000

Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia"
Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a step to the IDE PM state machine that reprograms disk PIO timings
as the first step on resume. This prevents ide deadlock on
resume-from-ram on my nforce3-based laptop.

An earlier implementation was written entirely within the amd74xx ide
driver, but Alan helpfully pointed out that this is the correct thing to
do globally. Still, I'm only calling hwif->tuneproc() for disks, based
on two things:

 - The existing state machine is already passed over for non-disk drives
 - Previous testing on my laptop shows that the hangs are related only
   to the disk - suspend/resume from a livecd showed that there's no
   need for this on the cdrom.
Signed-off-by: NJason Lunz <lunz@falooley.org>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Brad Campbell <brad@wasp.net.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove dma_base2 field from ide_hwif_t as it's used only in 2 drivers and
without great need.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: John Keller <jpk@sgi.com>
Signed-off-by: NJeremy Higdon <jeremy@sgi.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- setup-pci.c: remove the unused ide_pci_unregister_driver()
- ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check driver layer return values in IDE core.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are three flags being set by default by the PIIX driver for speeds >
PIO 1, and one not being cleared properly on fallback to PIO0.  The most
important one is the prefetch/post write control which only works for ATA
and can do bad things with ATAPI.

The patch does its best to set the flags correctly for drivers/ide.  Its
not 100% perfect but its closer than the original.  100% perfect requires
proper IORDY handling but this isn't critical (and its not right in libata
either ..  yet)

Sergei Shtylyov <sshtylyov@ru.mvista.com> said:

> +					{ 0, 0 },
> +					{ 0, 0 },
> +					{ 1, 0 },
> +					{ 2, 1 },
> +					{ 2, 3 }, };
>
>  	pio = ide_get_best_pio_mode(drive, pio, 5, NULL);

    BTW, there's quite obvious error here which leads to access outside of
timings[] if somebody passes PIO mode 5 (or autotuning code finds out that
drive supports PIO mode 5). Could have been fixed while at it... Those drives
should be rare, though...

> +		}
>  		master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
>  	}
>  	pci_write_config_word(dev, master_port, master_data);

    Actually, there's one more serious issue with piix_tune_drive() -- it
doesn't actually set the drive's own transfer mode.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix ide_in_drive_list: drive_table->id_firmware should be searched *in*
id->fw_rev, not vice versa.
Signed-off-by: NKirill Smelkov <kirr@mns.spb.ru>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows me to use dma with my cd/dvd attached to my on board
pdc20265 ide controller

Alan sayeth:

  Looks sane.  Would be nice to know if there is any documentation
  supporting this hack being safe but the logic makes sense.  The LBA48 case
  faces the same problem - the state machine gets confused about the transfer
  length and needs kicking
Signed-off-by: NTobias Oed <tobiasoed@hotmail.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Jens Axboe <axboe@suse.de>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ide_dma_speed() fails to actually honor the IDE drivers' mode support
masks) because of the bogus checks -- thus, selecting the DMA transfer mode
that the driver explicitly refuses to support is possible.  Additionally,
there is no check for validity of the UltraDMA mode data in the drive ID,
and the function is misdocumented.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make IDE_HWIFS configurable if EMBEDDED

This lets us lop as much as 16k off an x86 build.  It's a little ugly, but
it's dead simple.  Note the fix for HWIFS < 2.

Sizing interfaces dynamically unfortunately turns out to be pretty
major surgery.

add/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182)
function                                     old     new   delta
ide_hwifs                                  16920    1692  -15228
init_irq                                    1113     750    -363
ideprobe_init                                283     138    -145
ide_pci_setup_ports                         1329    1193    -136
save_match                                    85       -     -85
ide_register_hw_with_fixup                   367     287     -80
ide_setup                                   1364    1308     -56
is_chipset_set                                40       4     -36
create_proc_ide_interfaces                   225     205     -20
init_ide_data                                 84      67     -17
ide_probe_for_cmd640x                       1198    1183     -15
ide_unregister                              1452    1451      -1
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In 2.6.15.1 I encountered some IDE crashes when unplugging IDE cables to
emulate disk errors.  Below is a patch against 2.6.16 which I think still
applies.

1.  The first BUG_ON could trigger when a PREFLUSH IO fails (it would
   fail the original barrier request which hasn't been marked REQ_STARTED
   yet).

2. the rq could have been dequeued already (same as 1).

3.  HWGROUP(drive)->rq could be NULL because of the ide_error() several
   lines earlier.
Signed-off-by: NHua Zhong <hzhong@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Release the DMA engine for the custom mapping IDE drivers also (for
example, siimage.c does allocate it in both I/O-mapped and custom-mapped
modes).  Remove useless code from the error path of
ide_allocate_dma_engine().
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Claim extra DMA I/O ports regardless of what IDE channels are
  present/enabled.

- Remove extra ports handling from ide_mapped_mmio_dma() since it's not
  applicable to the custom-mapping IDE drivers.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Less functional than libata this just uses the merged interface provided for
dumb legacy OS's.  This is basically a bridge for people not yet ready to use
libata for some reason or another.

Port visibility is entirely dependant on the BIOS setup.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the per cpu sched domains are build then they also need to be placed
on the node where the cpu resides otherwise we will have frequent off node
accesses which will slow down the system.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixing wrong comment for find_idlest_cpu().
Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Up to now sched group's cpu_power for each sched domain is initialized
independently.  This made the setup code ugly as the new sched domains are
getting added.

Make the sched group cpu_power setup code generic, by using domain child
field and new domain flag in sched_domain.  For most of the sched
domains(except NUMA), sched group's cpu_power is now computed generically
using the domain properties of itself and of the child domain.

sched groups in NUMA domains are setup little differently and hence they
don't use this generic mechanism.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce the child field in sched_domain struct and use it in
sched_balance_self().

We will also use this field in cleaning up the sched group cpu_power
setup(done in a different patch) code.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If only a single CPU is present, printing this doesn't make much sense.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove dynamic sched group allocations for MC and SMP domains.  These
allocations can easily fail on big systems(1024 or so CPUs) and we can live
with out these dynamic allocations.

[akpm@osdl.org: build fix]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Force /sbin/init off isolated cpus (unless every CPU is specified as an
isolcpu).

Users seem to think that the isolated CPUs shouldn't have much running on
them to begin with.  That's fair enough: intuitive, I guess.  It also means
that the cpu affinity masks of tasks will not include isolcpus by default,
which is also more intuitive, perhaps.

/sbin/init is spawned from the boot CPU's idle thread, and /sbin/init
starts the rest of userspace. So if the boot CPU is specified to be an
isolcpu, then prior to this patch, all of userspace will be run there.

(throw in a couple of plausible devinit -> cpuinit conversions I spotted
while we're here).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

	switch(reg1 & 0x700) {
		case 5:
			info_hpt366.private_data = &hpt366_40;
			break;
		case 9:
			info_hpt366.private_data = &hpt366_25;
			break;
		default:
			info_hpt366.private_data = &hpt366_33;
			break;
	}

The above runs always default part. It should be "(reg1 & 0x700) >> 8".
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The 'STABLE BRANCH' entry is duplicated, remove it.
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Cc: Greg KH <greg@kroah.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We removed 8250_acpi in 2.6.17.  If we don't have PNPACPI turned on, we
won't find any ACPI serial devices, so mention this requirement in the
troubleshooting part of the documentation.

CONFIG_PNPACPI is already turned on in all the relevant defconfigs.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: N"Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>