- 13 7月, 2011 11 次提交
-
-
由 Matvejchikov Ilya 提交于
In sl_realloc_bufs() there is no reason to check if the requested MTU greater than or equal to the current MTU value as this function called only when requested MTU not equals to the current value. So, the ">=" operation can be safely replaced with the ">". Signed-off-by: NMatvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matvejchikov Ilya 提交于
Signed-off-by: NMatvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This never, ever, happens. Neighbour entries are always tied to one address family, and therefore one set of dst_ops, and therefore one dst_ops->protocol "hh_type" value. This capability was blindly imported by Alexey Kuznetsov when he wrote the neighbour layer. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Miller 提交于
Get rid of all of the useless and costly indirection by doing the neigh hash table lookup directly inside of the neighbour binding. Rename from arp_bind_neighbour to rt_bind_neighbour. Use new helpers {__,}ipv4_neigh_lookup() In rt_bind_neighbour() get rid of useless tests which are never true in the context this function is called, namely dev is never NULL and the dst->neighbour is always NULL. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
v2: incorporated suggestions from Randy Dunlap Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If we cannot allocate new skbs in RX completion handler, we should increase netdevice rx_dropped counter, not spam console messages. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Kirsher 提交于
In process and sleep allowed context, favor GFP_KERNEL allocations over GFP_ATOMIC ones. -v2: fixed checkpatch.pl warnings CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Ben Greear <greearb@candelatech.com> CC: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Carolyn Wyborny 提交于
This patch adds support for the Jumbo Frames feature on 82583 devices. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Almost all of these have long outstayed their welcome. And for every one of these macros, there are 10 features for which we didn't add macros. Let's just delete them all, and get out of habit of doing things this way. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 12 7月, 2011 10 次提交
-
-
由 Sergei Shtylyov 提交于
The driver reads PCI subsystem IDs from the PCI configuration registers while it is already stored by the PCI subsystem in the 'subsystem_device' field of 'struct pci_dev'... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Juhl 提交于
Make sure that the 'static' keywork is at the beginning of declaration for drivers/net/usb/kalmia.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We currently can free inetpeer entries too early : [ 782.636674] WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (f130f44c) [ 782.636677] 1f7b13c100000000000000000000000002000000000000000000000000000000 [ 782.636686] i i i i u u u u i i i i u u u u i i i i u u u u u u u u u u u u [ 782.636694] ^ [ 782.636696] [ 782.636698] Pid: 4638, comm: ssh Not tainted 3.0.0-rc5+ #270 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h [ 782.636702] EIP: 0060:[<c13fefbb>] EFLAGS: 00010286 CPU: 0 [ 782.636707] EIP is at inet_getpeer+0x25b/0x5a0 [ 782.636709] EAX: 00000002 EBX: 00010080 ECX: f130f3c0 EDX: f0209d30 [ 782.636711] ESI: 0000bc87 EDI: 0000ea60 EBP: f0209ddc ESP: c173134c [ 782.636712] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 782.636714] CR0: 8005003b CR2: f0beca80 CR3: 30246000 CR4: 000006d0 [ 782.636716] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 782.636717] DR6: ffff4ff0 DR7: 00000400 [ 782.636718] [<c13fbf76>] rt_set_nexthop.clone.45+0x56/0x220 [ 782.636722] [<c13fc449>] __ip_route_output_key+0x309/0x860 [ 782.636724] [<c141dc54>] tcp_v4_connect+0x124/0x450 [ 782.636728] [<c142ce43>] inet_stream_connect+0xa3/0x270 [ 782.636731] [<c13a8da1>] sys_connect+0xa1/0xb0 [ 782.636733] [<c13a99dd>] sys_socketcall+0x25d/0x2a0 [ 782.636736] [<c149deb8>] sysenter_do_call+0x12/0x28 [ 782.636738] [<ffffffff>] 0xffffffff Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
struct e1000_queue_stats is not used, lets remove it Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
RX rings should use GFP_KERNEL allocations if possible, add __netdev_alloc_skb_ip_align() helper to ease this. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Alexander Duyck 提交于
This fix makes it so that the fdir_perfect_lock is initialized in all cases. This is necessary as the fdir_filter_exit routine will always attempt to take the lock before inspecting the filter table. Reported-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch changes the serdes link code to support a forced mode for some hardware, based on bit set in EEPROM. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch updates the copyright on the igb driver files to 2011. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
Register writes followed by a delay are required to have a flush before the delay in order to commit the values to the register. Without the flush, the code following the delay may not function correctly. Reported-by: NTong Ho <tong.ho@ericsson.com> Reported-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 7月, 2011 2 次提交
-
-
由 David S. Miller 提交于
We need to make sure the multiplier is odd. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
And mask the hash function result by simply shifting down the "->hash_shift" most significant bits. Currently which bits we use is arbitrary since jhash produces entropy evenly across the whole hash function result. But soon we'll be using universal hashing functions, and in those cases more entropy exists in the higher bits than the lower bits, because they use multiplies. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 7月, 2011 1 次提交
-
-
由 Daniel Baluta 提交于
Rearrange struct sk_buff members comments to follow their definition order. Also, add missing comments for ooo_okay and dropcount members. Signed-off-by: NDaniel Baluta <dbaluta@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2011 7 次提交
-
-
由 Joe Perches 提交于
Multiple quoted strings are concatenated without comma separators. Make the arrays const while there. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shirley Ma 提交于
This patch clears tx zero-copy flag as needed. Signed-off-by: NShirley Ma <xma@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
由 Eric Dumazet 提交于
Some workloads need some headroom (NET_SKB_PAD) to avoid expensive reallocations. Using netdev_alloc_skb_ip_align() instead of bare skb_alloc() brings the NET_IP_ALIGN and the NET_SKB_PAD headroom. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Rasesh Mody <rmody@brocade.com> CC: Debashis Dutt <ddutt@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Shaoyan 提交于
The macro FILL_RX_POOLS_IN_BH is never been used, in order to avoid the compiler reports error because of the usage of function INIT_WORK, we just delete the marco. Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Signed-off-by: NWang Shaoyan <wangshaoyan.pt@taobao.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. This patch covers all remaining network drivers still containing such a check. Cc: Joe Perches <joe@perches.com> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We need to release "dcb_lock" which we took on the previous line. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2011 9 次提交
-
-
由 stephen hemminger 提交于
Change references to SysKonnect in Kconfig to Marvell since SysKonnect was acquired by Marvell back in 2002. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Since new hardware chip support was added bump version. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This is a backport from the vendor driver of support for the newer Optima (Prime and 2) chipsets. It also includes some setup changes for the current Optima chip as well. The code and comments intentionally mirror the vendor sk98lin driver to allow for easier maintenance. Although this adds support for new chip id's, these chip id's are not used by any of the current PCI device id's listed in the driver. The patch is just to get initial infrastructure in place to handle them when they come. I don't have access to any of this hardware to actually test it yet. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This is another fix picked out of the vendor driver. The IPG value in the serial mode register is supposed to be programmed differently at lower speeds. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Found when reviewing the vendor driver. Apparently some chip versions require receive checksumming to be enabled in order for RSS to work. Also, if fix_features has to change some settings; put in message in log in similar manner to netdev_fix_features. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
-
由 Gertjan van Wingerde 提交于
Implementing this callback function will cause mac80211 refrain from going to powersave state when there are still untransmitted TX frames in the queues. This would exactly mimic the behaviour of the legacy vendor driver which also doesn't go in powersave mode if there are still TX frames that are not transmitted. This should make powersaving and rt2x00 a better couple. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
Sitecom WLA4000 (USB ID 0x0df6:0x0060) is an RT3072 chipset. Sitecom WLA5000 (USB ID 0x0df6:0x0062) is an RT3572 chipset. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-