- 23 4月, 2009 9 次提交
-
-
由 Jouni Malinen 提交于
Add new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY and NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and retry limits. Since these values are stored in struct wiphy, remove the local copy from mac80211 where feasible (frag & rts threshold). The retry limits are currently needed in struct ieee80211_conf, but these could be eventually removed since the driver should have access to the values in struct wiphy. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Since we have ->deauth and ->disassoc we can support the wext SIWMLME call directly without driver wext handlers. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Instead of just passing the cfg80211-requested IEs, pass the locally generated ones as well. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
Added cfg80211_inform_bss() for full-mac devices to use. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Define a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be used to notify user space about locally detected Michael MIC failures. This matches with the MLME-MICHAELMICFAILURE.indication() primitive. Since we do not actually have TSC in the skb anymore when mac80211_ev_michael_mic_failure() is called, that function is changed to take in the TSC as an optional parameter instead of as a requirement to include the TSC after the hdr field (which we did not really follow). For now, TSC is not included in the events from mac80211, but it could be added at some point. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Previously, nl80211 mlme events were generated only for received deauthentication and disassociation frames. We need to do the same for locally generated ones in order to let applications know that we disconnected (e.g., when AP does not reply to a probe). Rename the nl80211 and cfg80211 functions (s/rx_//) to make it clearer that they are used for both received and locally generated frames. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Huang Weiyi 提交于
Remove duplicated #include in include/net/cfg80211.h. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 3月, 2009 4 次提交
-
-
由 Kalle Valo 提交于
In beacon filtering there needs to be a way to not expire the BSS even when no beacons are received. Add an interface to cfg80211 to hold BSS and make sure that it's not expired. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
The functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now be achieved with cleaner design by adding IE(s) into NL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. Since this is a very recently added command and there are no known (or known planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and taken into account how much extra complexity it adds to the IE processing we have now (and need to add in the future to fix IE order in couple of frames), it looks like the best option is to just remove the implementation of this command for now. The enum values themselves are left to avoid changing the nl80211 command or attribute numbers. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Add new nl80211 event notifications (and a new multicast group, "mlme") for informing user space about received and processed Authentication, (Re)Association Response, Deauthentication, and Disassociation frames in station and IBSS modes (i.e., MLME SAP interface primitives MLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm, MLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and MLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11 management frame since we already have the frame in that format and it includes all the needed information. This is the initial step in providing MLME SAP interface for authentication and association with nl80211. In other words, kernel code will act as the MLME and a user space application can control it as the SME. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 3月, 2009 2 次提交
-
-
由 Luis R. Rodriguez 提交于
We do this so we can later inform userspace who set the regulatory domain and provide details of the request. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This is not used as we can always just assume the first regulatory domain set will _always_ be a static regulatory domain. REGDOM_SET_BY_CORE will be the first request from cfg80211 for a regdomain and that then populates the first regulatory request. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 2月, 2009 6 次提交
-
-
由 Luis R. Rodriguez 提交于
All regulatory hints (core, driver, userspace and 11d) are now processed in a workqueue. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We do this so later on we can move the pending requests onto a workqueue. By using the wiphy_idx instead of the wiphy we can later easily check if the wiphy has disappeared or not. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The previous patch made cfg80211 generally aware of the signal type a given hardware will give, so now it can implement SIOCGIWRANGE itself, removing more wext stuff from mac80211. Might need to be a little more parametrized once we have more hardware using cfg80211 and new hardware capabilities. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
It wasn't a good idea to make the signal type a per-BSS option, although then it is closer to the actual value. Move it to be a per-wiphy setting, update mac80211 to match. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
The TX/RX packet counters are needed to fill in RADIUS Accounting attributes Acct-Output-Packets and Acct-Input-Packets. We already collect the needed information, but only the TX/RX bytes were previously exposed through nl80211. Allow applications to fetch the packet counters, too, to provide more complete support for accounting. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
This extends the NL80211_CMD_TRIGGER_SCAN command to allow applications to specify a set of information element(s) to be added into Probe Request frames with NL80211_ATTR_IE. This provides support for the MLME-SCAN.request primitive parameter VendorSpecificInfo and can be used, e.g., to implement WPS scanning. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 2月, 2009 4 次提交
-
-
由 Johannes Berg 提交于
Add a more flexible BSS lookup function so that mac80211 or other drivers can actually use this for getting the BSS to connect to. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch introduces cfg80211_unlink_bss, a function to allow a driver to remove a BSS from the internal list and make it not show up in scan results any more -- this is to be used when the driver detects that the BSS is no longer available. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When cfg80211 users have their own allocated data in the per-BSS private data, they will need to free this when the BSS struct is destroyed. Add a free_priv method and fix one place where the BSS was kfree'd rather than released properly. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch adds basic scan capability to cfg80211/nl80211 and changes mac80211 to use it. The BSS list that cfg80211 maintains is made driver-accessible with a private area in each BSS struct, but mac80211 doesn't yet use it. That's another large project. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 1月, 2009 5 次提交
-
-
由 Luis R. Rodriguez 提交于
Drivers may need more information than just who set the last regulatory domain, as such lets just pass the last regulatory_request receipt. To do this we need to move out to headers struct regulatory_request, and enum environment_cap. While at it lets add documentation for enum environment_cap. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This should help implement suspend/resume in mac80211, these hooks will be run before the device is suspended and after it resumes. Therefore, they can touch the hardware as much as they want to. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
A new nl80211 command, NL80211_CMD_SET_MGMT_EXTRA_IE, can be used to add arbitrary IE data into the end of management frames. The interface allows extra IEs to be configured for each management frame subtype, but only some of them (ProbeReq, ProbeResp, Auth, (Re)AssocReq, Deauth, Disassoc) are currently accepted in mac80211 implementation. This makes it easier to implement IEEE 802.11 extensions like WPS and FT that add IE(s) into some management frames. In addition, this can be useful for testing and experimentation purposes. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: NJouni Malinen <j@w1.fi> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Add flags for setting STA entries and struct ieee80211_if_sta to indicate whether management frame protection (MFP) is used. Signed-off-by: NJouni Malinen <j@w1.fi> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 12月, 2008 2 次提交
-
-
由 Sujith 提交于
HT management is done differently for AP and STA modes, unify to just the ->config() callback since HT is fundamentally a PHY property and cannot be per-BSS. Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote the channel type ( NO_HT, HT20, HT40+, HT40- ). Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Henning Rogge 提交于
This patch adds signal strength and transmission bitrate to the station_info of nl80211. Signed-off-by: NHenning Rogge <rogge@fgan.de> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 12月, 2008 3 次提交
-
-
由 Johannes Berg 提交于
further reducing wext code in mac80211. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch moves the SIOCGIWNAME handling from mac80211 to cfg80211. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
This patch adds new NL80211_CMD_SET_WIPHY attributes NL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow userspace to set the operating channel (e.g., hostapd for AP mode). Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 11月, 2008 3 次提交
-
-
由 Luis R. Rodriguez 提交于
Ensure regulatory converstion macros safely accept multiple arguments and make REG_RULE() use them. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Add a new attribute, NL80211_ATTR_WIPHY_TXQ_PARAMS, that can be used with NL80211_CMD_SET_WIPHY for userspace (e.g., hostapd) to set TX queue parameters (txop, cwmin, cwmax, aifs). Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Add a new attribute, NL80211_ATTR_BSS_BASIC_RATES, that can be used with NL80211_CMD_SET_BSS for userspace (e.g., hostapd) to set which rates are in the basic rate set. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 11月, 2008 1 次提交
-
-
由 colin@cozybit.com 提交于
The two new commands are NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS. There is a new attribute enum, NL80211_ATTR_MESH_PARAMS, which enumerates the various mesh configuration parameters. Moved struct mesh_config from mac80211/ieee80211_i.h to net/cfg80211.h. nl80211_get_mesh_params and nl80211_set_mesh_params unpack the netlink messages and ask the driver to get or set the configuration. This is done via two new function stubs, get_mesh_params and set_mesh_params, in struct cfg80211_ops. Signed-off-by: NColin McCabe <colin@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 9月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This patch makes cfg80211 show the interface in the nl80211 information about a specific interface. API users are required to keep the type updated (everything else is fairly complicated) but you will get a warning if you fail to keep it updated. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-