hdmi 1.3 raises the max clock from 165 Mhz to 340 Mhz.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* korg/drm-radeon-cayman:
  drm/radeon/kms: add cayman pci ids
  drm/radeon/kms: cayman/evergreen cs checker updates
  drm/radeon/kms/cayman: always set certain VGT regs at CP init
  drm/radeon/kms: additional default context regs for cayman
  drm/radeon/kms: add cayman CS check support
  drm/radeon/kms: add radeon_asic entry for cayman
  drm/radeon/kms: add cayman safe regs
  drm/radeon/kms/cayman: add asic init/startup/fini/suspend/resume functions
  drm/radeon/kms: add cayman asic reset support
  drm/radeon/kms: add support for cayman irqs
  drm/radeon/kms: add support for CP setup on cayman asics
  drm/radeon/kms: add support for cayman gart setup
  drm/radeon/kms: add gpu_init function for cayman
  drm/radeon/kms: add ucode loader for cayman
  drm/radeon/kms: add cayman chip family

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

These should be handled by the clear_state setup, but set them
directly as well just to be sure.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Added to existing evergreen CS checker.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

For the CS checker.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cayman is different enough from evergreen to warrant it's own functions.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cayman asics have 3 ring buffers:
ring 0 supports both gfx and compute
rings 1 and 2 are compute only

At the moment we only support ring 0.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch sets up the gart in legacy mode.  We
probably want to switch to full VM mode at some point.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This may some work to get accel going.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The MC ucode is no longer loaded by the vbios
tables as on previous asics.  It now must be loaded
by the driver.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cayman is DCE5 display plus a new 4-way shader block.
3D state programming is similar to evergreen.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This allows userspace to work out how many DBs there are
for conditional rendering to work.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This could free things twice, just deref the GEM object
and hope its enough.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This lets r600g enable texture formats and some more extensions.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is required for NV_conditional_render and EXT_transform_feedback.

v2: add evergreen support.
Signed-off-by: NDave Airlie <airlied@redhat.com>

have to read values from the IB in order as we could cross
a page boundary at any time and won't be able to go backwards.
Signed-off-by: NDave Airlie <airlied@redhat.com>

There are a bunch of off by one errors in the sanity checks here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (50 commits)
  drm/nv50: flesh out ZCULL init and match nvidia on later chipsets
  drm/nv50: support for compression
  drm/nv50-nvc0: delay GART binding until move_notify time
  drm/nouveau: rename nouveau_vram to nouveau_mem
  drm/nvc0: allow creation of buffers with any non-compressed memtype
  drm/nv50-nvc0: unmap buffers from the vm when they're evicted
  drm/nv50-nvc0: move vm bind/unbind to move_notify hook
  drm/nv50-nvc0: restrict memtype to those specified at creation time
  drm/nouveau: pass domain rather than ttm flags to gem_new()
  drm/nv50: simplify bo moves now that they're all through the vm
  drm/nouveau: remove no_vm/mappable flags from nouveau_bo
  drm/nouveau: Fix pageflip event
  drm/nouveau/vbios: parse more gpio tag bits from connector table
  drm/nouveau: decode PFIFO DMA_PUSHER error codes
  drm/nv50: fix typos in CCACHE error reporting
  drm/nvc0: support for sw methods + enable page flipping
  drm/nv50: enable page flipping
  drm/nv50-nvc0: activate/update ds channel's framebuffer on modesets
  drm/nv50-nvc0: initialise display sync channels
  drm/nv50-nvc0: precalculate some fb state when creating them
  ...

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The immediate benefit of doing this is that on NV50 and up, the GPU
virtual address of any buffer is now constant, regardless of what
memtype they're placed in.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This structure will also be used for GART in the near future.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This adds a table of known nvc0 memtypes, and modifies the validity check
to allow any non-compressed type.  Support for Z compression will come at
a later point.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Upcoming patches are going to enable full support for buffers that keep
a constant GPU virtual address whenever they're validated for use by
the GPU.

In order for this to work properly while keeping support for large pages,
we need to know if it's ever going to be possible for a buffer to end
up in GART, and if so, disable large pages for the buffer's VMA.

This is a new restriction that's not present in earlier kernel's, but
should not break userspace as the current code never attempts to validate
buffers into a memtype other than it was created with.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

'mappable' isn't really used at all, nor is it necessary anymore as the
bo code is capable of moving buffers to mappable vram as required.

'no_vm' isn't necessary anymore either, any places that don't want to be
mapped into a GPU address space should allocate the VRAM directly instead.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Assign correct event when initializing nouveau_page_flip_state.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The code was supposed to print registers around 0x405018 (which is read
earlier), not 0x405818.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>