imx-drm: fixes for parallel-display, imx-tve, and ipu-common

These patches fix the parallel-display driver to use the standard OF
graph bindings for connecting a drm_panel via device tree instead of
an undocumented, driver specific device tree property, take care to
disable all IPU interrupts before setting up the irq chip to fix a
kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting
the media bus format set by the imx-tve driver.

* tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: tve: fix media bus format for VGA output
  GPU: ipu: fix lockup caused by pending chained interrupts
  drm/imx: parallel-display: fix drm_panel support

A range of fixes for the Armada DRM driver:
- A missing wakeup could result in overlay frames being delayed, causing
  video playback to hiccup.
- Avoid unmapping a dma-buf attachment which was never mapped
- Fix the overlay when partially off the screen by switching to the
  drm_plane_helper_check_update() helper and using the calculated
  coordinates to set the start address.
- Remove an incorrect assignment to crtc->mode - which should be the
  unadjusted mode.
- Fix a missing call to drm_plane_cleanup() in the overlay code.

* 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: avoid saving the adjusted mode to crtc->mode
  drm/armada: fix overlay when partially off-screen
  drm/armada: convert overlay to use drm_plane_helper_check_update()
  drm/armada: fix gem object free after failed prime import
  drm/armada: fix incorrect overlay plane cleanup
  drm/armada: fix missing overlay wake-up

Next batch of i915 fixes. Note that the compat32 patch here needs the drm
core one to be actually useful, I'll send you that one with a separate
drm-fixes pull request. One revert because a fix in -rc2 did break
existing userspace.

* tag 'drm-intel-fixes-2015-07-15' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Do not call intel_crtc_disable if the crtc is already disabled.
  Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
  drm/i915: Forward all core DRM ioctls to core compat handling
  drm/i915: fix oops in primary_check_plane
  drm/i915: remove unused has_dma_mapping flag
  drm/i915: Fix missing return warning for !CONFIG_DEBUGFS
  drm/i915: avoid leaking DMA mappings
  drm/i915: Snapshot seqno of most recently submitted request.
  drm/i915: Store device pointer in contexts for late tracepoint usafe

Ok next attempt at drm-fixes pull. Big thing really is just the compat32
one for addfb2.1.

* tag 'topic/drm-fixes-2015-07-16' of git://anongit.freedesktop.org/drm-intel:
  drm: Provide compat ioctl for addfb2.1
  Documentation: drm: Fix tablulation in KMS properties table
  drm: add a check for x/y in drm_mode_setcrtc
  drm/rockchip: use drm_gem_mmap helpers

More radeon and amdgpu fixes for 4.2.  Mostly amdgpu bug fixes.

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu/dce8: Re-set VBLANK interrupt state when enabling a CRTC
  drm/radeon/ci: silence a harmless PCC warning
  drm/amdgpu/cz: silence some dpm debug output
  drm/amdgpu/cz: store the forced dpm level
  drm/amdgpu/cz: unforce dpm levels before forcing to low/high
  drm/amdgpu: remove bogus check in gfx8 rb setup
  drm/amdgpu: set proper index/data pair for smc regs on CZ (v2)
  drm/amdgpu: disable the IP module if early_init returns -ENOENT (v2)
  drm/amdgpu: stop context leak in the error path
  drm/amdgpu: validate the context id in the dependencies
  drm/radeon: fix user ptr race condition
  drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
  drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5

Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

This has been a source of confusion.  Make it debug only.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So the selected forced level shows up properly in sysfs.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Always respect the harvest configuration as is.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: squash in later fix
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.

v2: fix logic as noted by Christian
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Port of amdgpu patch 9298e52f.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can be the case when the GPU is powered off, e.g. via vgaswitcheroo
or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin
flushes the TLB after setting rdev->gart.ptr to non-NULL.

Fixes panic on powering off R7xx GPUs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Pull TPM bugfixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm, tpm_crb: fail when TPM2 ACPI table contents look corrupted
  tpm: Fix initialization of the cdev

Pull rdma fixes from Doug Ledford:
 "Mainly fix-ups for the various 4.2 items"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (24 commits)
  IB/core: Destroy ocrdma_dev_id IDR on module exit
  IB/core: Destroy multcast_idr on module exit
  IB/mlx4: Optimize do_slave_init
  IB/mlx4: Fix memory leak in do_slave_init
  IB/mlx4: Optimize freeing of items on error unwind
  IB/mlx4: Fix use of flow-counters for process_mad
  IB/ipath: Convert use of __constant_<foo> to <foo>
  IB/ipoib: Set MTU to max allowed by mode when mode changes
  IB/ipoib: Scatter-Gather support in connected mode
  IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES
  IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush
  IB/ucma: Fix lockdep warning in ucma_lock_files
  rds: rds_ib_device.refcount overflow
  RDMA/nes: Fix for incorrect recording of the MAC address
  RDMA/nes: Fix for resolving the neigh
  RDMA/core: Fixes for port mapper client registration
  IB/IPoIB: Fix bad error flow in ipoib_add_port()
  IB/mlx4: Do not attemp to report HCA clock offset on VFs
  IB/cm: Do not queue work to a device that's going away
  IB/srp: Avoid using uninitialized variable
  ...

Pull file locking updates from Jeff Layton:
 "I had thought that I was going to get away without a pull request this
  cycle.  There was a NFSv4 file locking problem that cropped up that I
  tried to fix in the NFSv4 code alone, but that fix has turned out to
  be problematic.  These patches fix this in the correct way.

  Note that this touches some NFSv4 code as well.  Ordinarily I'd wait
  for Trond to ACK this, but he's on holiday right now and the bug is
  rather nasty.  So I suggest we merge this and if he raises issues with
  it we can sort it out when he gets back"
Acked-by: NBruce Fields <bfields@fieldses.org>
Acked-by: NDan Williams <dan.j.williams@intel.com>
 [ +1 to this series fixing a 100% reproducible slab corruption +
   general protection fault in my nfs-root test environment. - Dan ]
Acked-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

* tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux:
  locks: inline posix_lock_file_wait and flock_lock_file_wait
  nfs4: have do_vfs_lock take an inode pointer
  locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait
  locks: have flock_lock_file take an inode pointer instead of a filp
  Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"

Pull KVM fixes from Paolo Bonzini:

 - Fix FPU refactoring ("kvm: x86: fix load xsave feature warning")

 - Fix eager FPU mode (Cc stable)

 - AMD bits of MTRR virtualization

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: fix load xsave feature warning
  KVM: x86: apply guest MTRR virtualization on host reserved pages
  KVM: SVM: Sync g_pat with guest-written PAT value
  KVM: SVM: use NPT page attributes
  KVM: count number of assigned devices
  KVM: VMX: fix vmwrite to invalid VMCS
  KVM: x86: reintroduce kvm_is_mmio_pfn
  x86: hyperv: add CPUID bit for crash handlers

Pull ARC fixes from Vineet Gupta:
 - Makefile changes (top-level+ARC) reinstates -O3 builds (regression
   since 3.16)
 - IDU intc related fixes, IRQ affinity
 - patch to make bitops safer for ARC
 - perf fix from Alexey to remove signed PC braino
 - Futex backend gets llock/scond support

* tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARCv2: support HS38 releases
  ARC: make sure instruction_pointer() returns unsigned value
  ARC: slightly refactor macros for boot logging
  ARC: Add llock/scond to futex backend
  arc:irqchip: prepare for drivers/irqchip/irqchip.h removal
  ARC: Make ARC bitops "safer" (add anti-optimization)
  ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
  ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler
  ARCv2: intc: IDU: support irq affinity
  ARC: fix unused var wanring
  ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO
  ARC: Override toplevel default -O2 with -O3
  kbuild: Allow arch Makefiles to override {cpp,ld,c}flags
  ARCv2: guard SLC DMA ops with spinlock
  ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D

Pull s390 fixes from Martin Schwidefsky:
 "One improvement for the zcrypt driver, the quality attribute for the
  hwrng device has been missing.  Without it the kernel entropy seeding
  will not happen automatically.

  And six bug fixes, the most important one is the fix for the vector
  register corruption due to machine checks"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/nmi: fix vector register corruption
  s390/process: fix sfpc inline assembly
  s390/dasd: fix kernel panic when alias is set offline
  s390/sclp: clear upper register halves in _sclp_print_early
  s390/oprofile: fix compile error
  s390/sclp: fix compile error
  s390/zcrypt: enable s390 hwrng to seed kernel entropy

Pull final init.h/module.h code relocation from Paul Gortmaker:
 "With the release of 4.2-rc2 done, we should not be seeing any new code
  added that gets upset by this small code move, and we've banked yet
  another complete week of testing with this move in place on top of
  4.2-rc1 via linux-next to ensure that remained true.

  Given that, I'd like to put it in now so that people formulating new
  work for 4.3-rc1 will be exposed to the ever so slightly stricter (but
  sensible) requirements wrt.  whether they are needing init.h vs.
  module.h macros, even if they are not using linux-next.

  The diffstat of the move is slightly asymmetrical due to needing to
  leave behind a couple #ifdef in the old location and add the same ones
  to the new location, but other than that, it is a 1:1 move, complete
  with the module_init/exit trailing semicolon that we can't fix.  That
  is, until/unless someone does a tree-wide sed fix of all the
  approximately 800 currently in tree users relying on it"

* tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  module: relocate module_init from init.h to module.h

Pull tracing fix from Steven Rostedt:
 "Fengguang Wu discovered a crash that happened to be because of the
  branch tracer (traces unlikely and likely branches) when enabled with
  certain debug options.

  What happened was that various debug options like lockdep and
  DEBUG_PREEMPT can cause parts of the branch tracer to recurse outside
  its recursion protection.  In fact, part of its recursion protection
  used these features that caused the lockup.  This cleans up the code a
  little and makes the recursion protection a bit more robust"

* tag 'trace-v4.2-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have branch tracer use recursive field of task struct

We're not supposed to store the adjusted mode into crtc->mode.  We don't
use it anyway, so we can safely remove this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the start address calculation when overlay is partially off screen.
fb->bits_per_pixel is not set for YUV formats, and is always zero, which
led to the first component always starting at zero.

Use drm_format_plane_cpp() instead.

This also revealed a problem in that YUYV formats toggle the U/V data
for odd pixel start address offsets.  We try to rectify that by
toggling the U/V swap, which for the most part works, but seemingly
introduces a flicker for one scan frame of swapped U/V.

However, these changes result in an overall improvement.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use drm_plane_helper_check_update() rather than our own code to validate
and limit the size of the displayed image.  As we are able to support
scaling, permit the full scaling ability.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the gem object freeing after a partial import of a dma buffer,
eg, one which has been imported, but not mapped.  This was provoking
a warning from the dma_buf code.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The Armada overlay plane wasn't being properly cleaned up as it was
missing a call to drm_plane_cleanup().  It also wasn't freeing the
right type of pointer (although we were still freeing the right
pointer value.)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Nothing was waking up the overlay plane wait queue, so we were fully
reliant on the HZ/25 wait timing out to make progress.  Fix the lack
of wake-up.

We were also mis-handling the wait_event_timeout() return value - this
returns an unsigned integer of the remaining time, or zero on timeout
and the condition evaluated false.  Checking this for less than zero
is not sane.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Frame buffer modifiers extensions provided in;

  commit e3eb3250
  Author: Rob Clark <robdclark@gmail.com>
  Date:   Thu Feb 5 14:41:52 2015 +0000

      drm: add support for tiled/compressed/etc modifier in addfb2

Missed the structure packing/alignment problem where 64-bit
members were added after the odd number of 32-bit ones. This
makes the compiler produce structures of different sizes under
32- and 64-bit x86 targets and makes the ioctl need explicit
compat handling.

v2: Removed the typedef. (Daniel Vetter)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
[danvet: Squash in compile fix from Mika.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Destroy ocrdma_dev_id IDR on module exit, reclaiming the allocated memory.

This was detected by the following semantic patch (written by Luis Rodriguez
<mcgrof@suse.com>)
<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@

module_init(init);

@ defines_module_exit @
identifier exit;
@@

module_exit(exit);

@ declares_idr depends on defines_module_init && defines_module_exit @
identifier idr;
@@

DEFINE_IDR(idr);

@ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 idr_destroy(&idr);
 ...
}

@ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 +idr_destroy(&idr);
 }

</SmPL>
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Destroy multcast_idr on module exit, reclaiming the allocated memory.

This was detected by the following semantic patch (written by Luis Rodriguez
<mcgrof@suse.com>)
<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@

module_init(init);

@ defines_module_exit @
identifier exit;
@@

module_exit(exit);

@ declares_idr depends on defines_module_init && defines_module_exit @
identifier idr;
@@

DEFINE_IDR(idr);

@ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 idr_destroy(&idr);
 ...
}

@ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 +idr_destroy(&idr);
}

</SmPL>
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is little chance our memory allocation will fail, so we can
combine initializing the work structs with allocating them instead of
looping through all of them once to allocate and again to initialize.
Then when we need to actually find out if our device is up or in the
process of going down, have all of our work structs batched up, take the
spin_lock once and only once, and do all of the batch under the one
spin_lock invocation instead of incurring all of the locked memory cycles
we would otherwise incur to take/release the spin_lock over and over
again.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We create a number of work structs to be queued up to a workqueue, and
on completion of the workqueue handler, the workqueue handler frees the
allocated memory.  If, however, we don't queue the work struct because
the device is going down, then we need to free the memory ourselves.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

On failure, we loop through all possible pointers and test them before
calling kfree.  But really, why even attempt to free items we didn't
allocate when we can easily loop through exactly and only the devices
for which the original memory allocation succeeded and free just those.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

For IB links, reading HCA flow counters through iboe_process_mad() should
be used when mlx4_ib_process_mad() is invoked only for VFs PMA queries and
exactly nothing else.

Fixes: 7193a141 ('IB/mlx4: Set VF to read from QP counters')
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>