This patch implements the driver necessary use the Analog Devices
Blackfin processor's on-chip ethernet MAC controller.

[try#2]
 - add timeout control
 - kill dma_config_reg bitfields
 - some trivial cleanup

[try#3]
 - add endianess check
 - add DRV_NAME, DRV_VERSION... driver information string
 - add some comments for silicon anomaly and dma API confusion
 - some code trivial cleanup

[try#4]
 - add Blackfin latest GPIO pin mux opertion with Michael Hennerich's
  help and Dan's review
 - rewrite the DMA descriptor list operation in a more readable way
  by Joe's review

[try#5]
 - cleanup some coding style by Joe's review.

[try#6]
 - 1.1 version fix a bug when set up multicast list pointed by Mr. yoshfuji
 - rearrange the desc_list_free function.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix wrong argument of tc35815_read_plat_dev_addr()
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

--
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

--
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

--
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

--
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The TSEC/eTSEC can detect the interface to the PHY automatically,
but it isn't able to detect whether the RGMII connection needs internal
delay.  So we need to detect that change in the device tree, propagate
it to the platform data, and then check it if we're in RGMII.  This fixes
a bug on the 8641D HPCN board where the Vitesse PHY doesn't use the delay
for RGMII.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The Vitesse PHY on the 8641D needs to be set up with internal delay to
work in RGMII mode.  So we add skew when it is set to RGMII_ID mode.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NHaruki Dai <Dai.Haruki@freescale.com>
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>

The TSEC/eTSEC automatically detect their PHY interface type, unless
the type is RGMII-ID (RGMII with internal delay).  In that situation,
it just detects RGMII.  In order to fix this, we need to pass in rgmii-id
if that is the connection type.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The Vitesse 824x PHY doesn't allow an interrupt to be cleared if
the mask bit for that interrupt isn't set.  This means that the PHY
Lib's order of handling interrupts (disable, then clear) breaks on this
PHY.  However, clearing then disabling the interrupt opens up the code
for a silly race condition.  So rather than change the PHY Lib, we change
the Vitesse driver so it always clears interrupts before disabling them.
Further, the ack function only clears the interrupt if interrupts are
enabled.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NYork Sun <yorksun@freescale.com>
Acked-by: NHaiying Wang <Haiying.Wang@freescale.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] Initialize phy_mask for both macb devices
  [AVR32] Fix atomic_add_unless() and atomic_sub_unless()
  [AVR32] Correct misspelled CONFIG_BLK_DEV_INITRD variable.
  [AVR32] Fix build error in parse_tag_rdimg()
  [AVR32] Don't wire up macb0 unless SW6 is in default position
  [AVR32] Wire up SSC platform device 0 as TX on ATSTK1000 board
  [AVR32] Add Atmel SSC driver platform device to AT32AP architecture
  [AVR32] Remove optimization of unaligned word loads
  [AVR32] Make STK1000 mux settings configurable
  [AVR32] CPU frequency scaling for AT32AP
  [AVR32] Split SM device into PM, RTC, WDT and EIC
  [AVR32] faster avr32 unaligned access

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup:
  [PATCH] x86: do not recompile boot for each build
  [x86 setup] Save/restore DS around invocations of INT 10h
  [x86 setup] VGA: Clear the Protect bit before setting the vertical height
  [x86 setup] Fix assembly constraints
  [x86 setup] build/tools.c: fix comment
  [x86 setup] MAINTAINERS: document x86 setup code git tree

The TRACE_IRQS_ON function in iret_exc: calls a C function without
ensuring that the segments are set properly. Move the trace function and
the enabling of interrupt into the C stub.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code for LDT segment selectors was not robust in the face of a bogus
selector set in %cs via ptrace before the single-step was done.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The STK1000 uses pullups on the MDIO lines to the PHY, but they are
too weak. This causes the PHY layer to detect PHYs on all possible MII
addresses. Mask out all but the correct address to prevent this from
happening.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

These functions depend on "result" being initalized to 0, but "result"
is not included as an input constraint to the inline assembly block
following its initialization, only as an output constraint. Thus gcc
thinks it doesn't need to initialize it, so result ends up undefined
if the "unless" condition is true.

This fixes an oops in sunrpc where the faulty atomics caused
rpciod_up() to not start the workqueue as it should.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

This code is inside an #ifdef with a misspelled config symbol, so it
hasn't been used for a long time. Fix it before fixing the config
symbol to keep bisection working.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

If the user wants to sacrifice macb0 for more GPIOs, let him.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

This patch adds register definitions, clocks and IRQs to the platform devices.
Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

If we let unaligned word loads bypass the generic unaligned handling,
gcc may combine it with a swap.b instruction and turn it into a ldwsp
instruction, which does not work with unaligned addresses.

Revert the optimization to prevent the RNDIS driver from crashing.
Hopefully we'll figure something out later (it may be better to do the
optimization in gcc.)
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

This adds some STK1002-specific config options covering the jumper settings,
so the kernel can automatically be configured to include the relevant devices.

One of them replaces the previous internal SW2_DEFAULT setting; SPI config
is affected by two of the jumpers; and a fourth one switches between LCD and
the second Ethernet connector.  (There's more that to be done.)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

This patch enables CPU frequency scaling for AT32AP devices. This will
enable the CPU to scale between the speed of the high speed bus and
the master clock and thus save some power.

The patch also adds a parent to cpu_clk and a cpu_clk_set_rate to
enable changing the CPU clock divider in a sane way.

The driver does not check if the given rate is 0, thus resulting in a
div by 0.  I think this check should be go into the clk_set_rate
framework, and not here.

Tested on AT32AP7000/ATSTK1000.

Hardware documentation can be found in the AT32AP7000 datasheet.
Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Split the SM platform device into separate platform devices for PM,
RTC, WDT and EIC. This is more correct according to the documentation
and allows us to simplify the code a little.

Also turn the EIC driver into a real platform driver.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>

Use a more conventional implementation for unaligned access, and include
an AT32AP-specific optimization:  the CPU will handle unaligned words.

The result is always faster and smaller for 8, 16, and 32 bit values.
For 64 bit quantities, it's presumably larger.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Keep the arch/i386/boot directory from being rebuilt every time.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

There exists at least one card, Trident TVGA8900CL (BIOS dated 1992/9/8)
which clobbers DS when "scrolling in an SVGA text mode of more than
800x600 pixels."  Although we are extremely unlikely to run into that
situation, it is cheap insurance to save and restore DS, and it only adds
a grand total of 50 bytes to the total output.

Pointed out by Etienne Lorrain.

Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

If the user has asked for the vertical height registers to be recomputed
by setting bit 15 in the video mode number, we do so without clearing the
Protect bit in the Vertical Retrace Register before setting the Overflow
register.  As a result, if the VGA BIOS had set the Protect bit, the
write to the Overflow register will be dropped, and bits [9:8] of the
vertical height will be left unchanged.

This is a bug imported from the assembly version of this code.  It was
pointed out by Etienne Lorrain.

Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Fix incorrect assembly constraints.  In particular, fix memory
constraints used inside push..pop, which can cause invalid operation
since gcc may generate %esp-relative references.

Additionally:

outl() should have "dN" not "dn".

query_mca() shouldn't listen 16/32-bit registers in an 8-bit only
context.

has_eflag(): the "mask" is only used well after both the stack pointer
and the output registers have been touched; this requires the output
registers to be earlyclobbers (=&) and the input to exclude memory (so
"ri", not "g").

Thanks to Etienne Lorrain and Chuck Ebbert for prompting this review.

Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Correct a comment in arch/i386/boot/build/tools.c; we now build the
kernel from only two components instead of three, since the boot
sector has been integrated in the setup code.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Document the existence of a published git tree for the x86 setup code.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (126 commits)
  V4L/DVB (5847): Clean up schedule_timeout calls in cpia2 and ivtv code
  V4L/DVB (5846): Clean up setting state and scheduling timeouts
  V4L/DVB (5844): ivtv: add high volume debugging flag
  V4L/DVB (5843): ivtv: fix missing signal_pending check.
  V4L/DVB (5842): ivtv: Add locking to ensure stream setup is atomic.
  V4L/DVB (5841): tveeprom: add support for Philips FQ1216LME MK3 tuner.
  V4L/DVB (5840): fix dst and cx24123: tune() callback changed signess for delay
  V4L/DVB (5838): dvb-core: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22)
  V4L/DVB (5837): stv0299: Fix signedness warning (gcc 4.1.1, kernel 2.6.22)
  V4L/DVB (5836): dvb-ttpci: re-initialize aspect ratio and pan scan after arm crash
  V4L/DVB (5835): saa7146/dvb-ttpci: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22)
  V4L/DVB (5834): dvb-core: fix signedness warnings and const stripping
  V4L/DVB (5832): ir-common: optimize bit extract function
  V4L/DVB (5831): stradis: use ARRAY_SIZE
  V4L/DVB (5829): Firmware extract and loading for opera dvb-usb update
  V4L/DVB (5828): Kconfig: Added GemTek USB radio and removed experimental dependency.
  V4L/DVB (5826): Usbvision: video mux cleanup
  V4L/DVB (5825): Alter the tuner type for the WinTV USB UK PAL model.
  V4L/DVB (5824): Usbvision: Hauppauge WinTV USB SECAM_L fix
  V4L/DVB (5821): Saa7134: add remote control support for LifeView FlyDVB-S LR300
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: extent macros cleanup
  Fix compilation with EXT_DEBUG, also fix leXX_to_cpu conversions.
  ext4: remove extra IS_RDONLY() check
  ext4: Use is_power_of_2()
  Use zero_user_page() in ext4 where possible
  ext4: Remove 65000 subdirectory limit
  ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields 
  ext4: Add nanosecond timestamps
  jbd2: Move jbd2-debug file to debugfs
  jbd2: Fix CONFIG_JBD_DEBUG ifdef to be CONFIG_JBD2_DEBUG
  ext4: Set the journal JBD2_FEATURE_INCOMPAT_64BIT on large devices
  ext4: Make extents code sanely handle on-disk corruption
  ext4: copy i_flags to inode flags on write
  ext4: Enable extents by default
  Change on-disk format to support 2^15 uninitialized extents
  write support for preallocated blocks
  fallocate support in ext4
  sys_fallocate() implementation on i386, x86_64 and powerpc

* 'upstream' of git://git.infradead.org/~dedekind/ubi-2.6: (28 commits)
  UBI: fix compile warning
  UBI: fix error handling in erase worker
  UBI: fix comments
  UBI: remove unneeded error checks
  UBI: cleanup usage of try_module_get
  UBI: fix overflow bug
  UBI: bugfix in max_sqnum calculation
  UBI: bugfix in sqnum calculation
  UBI: fix signed-unsigned multiplication
  UBI: fix bug in atomic_leb_change()
  UBI: fix message
  UBI: fix debugging stuff
  UBI: bugfix in error path
  UBI: use is_power_of_2()
  UBI: fix freeing ubi->vtbl while unloading
  UBI: fix MAINTAINERS
  UBI: bugfix in ubi_leb_change()
  UBI: kill homegrown endian macros
  UBI: cleanup ioctl handling
  UBI: error path bugfix
  ...

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Replace assignments to "current->state" with the preferred calls to
schedule_timeout_interruptible().
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for high volume debug messages, allowing them to be turned
on selectively.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>