In case in user has a OMAP3630 < ES1.2 the kernel should warn the user
about the ERRATUM, but using pr_warn instead of WARN_ON is already
enough, as there is nothing else the user can do besides changing the
board.
Signed-off-by: NRicardo Salveti de Araujo <ricardo.salveti@canonical.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>

The debugfs support added to the regulator API (which has been merged
in during this merge window) creates directories for regulators named
after the display names for the regulators so replace / as a separator
for multiple supplies with + in the SMDK6410 machine.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Avoid relying on implicit inclusion of machine.h
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Reduce the logging output of s3c64xx_dma_init1() as it is not useful
for normal bootup (and we get an overall indication of the registration
of the PL180 DMA block).

This removes the following output from the log:

s3c64xx_dma_init1: registering DMA 0 (e0808100)
s3c64xx_dma_init1: registering DMA 1 (e0808120)
s3c64xx_dma_init1: registering DMA 2 (e0808140)
s3c64xx_dma_init1: registering DMA 3 (e0808160)
s3c64xx_dma_init1: registering DMA 4 (e0808180)
s3c64xx_dma_init1: registering DMA 5 (e08081a0)
s3c64xx_dma_init1: registering DMA 6 (e08081c0)
s3c64xx_dma_init1: registering DMA 7 (e08081e0)
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The MMC core calls s3c6400_setup_sdhcp_cfg_card() very frequently, causing
the log message in there at KERN_INFO to be displayed a lot which is slow
and overly chatty. Convert the message into a pr_debug() to tone this down.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The clock for i2c1 has been missing for a while, add it to the list of
clocks for the system and ensure it is initialised at startup.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

No need to put these in the global namespace and sparse gets upset.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Ensures that the declaration agrees with the definition and makes sparse
happy.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The call to s3c_gpio_cfgrange_nopull() takes a size and base
but this looks like it is trying to do base and end. This means
it is configuring too many GPIOs and on the case of the Cragganmore
means we're seeing an overflow of the ROW pins causing problems
with the keyboard driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The gta02 header file still uses the old S3C2410_GPJx defines instead of the
S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been removed
this causes the following build failure:

	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk':
	sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2' undeclared (first use in this function)
	sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared identifier is reported only once
	sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it appears in.)
	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk':
	sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2' undeclared (first use in this function)
	sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event':
	sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1' undeclared (first use in this function)
	sound/soc/samsung/neo1973_wm8753.c: At top level:
	sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2' undeclared here (not in a function)
	sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1' undeclared here (not in a function)

This patches fixes the issue by doing a s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g
on the file.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch modifies the number of total GPIO lines for Bank F
for Samsung S5P6440 and S5P6450 SoCs from 2 to 16.
This is necessary as the GPIO lines from 0 to 13 are reserved
and only lines 14 and 15 are used. As during initialization,
the line number starts at 0, putting 2 does not solve the
intended purpose.
Signed-off-by: NBanajit Goswami <banajit.g@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The gta02 mach file references the ohci device.
So we need to select S3C_DEV_USB_HOST to have the device available.

This fixes the following linker errors:
	arch/arm/mach-s3c2440/built-in.o: In function 'gta02_machine_init':
	mach-gta02.c:(.init.text+0x370): undefined reference to 's3c_ohci_set_platdata'
	arch/arm/mach-s3c2440/built-in.o:(.init.data+0xac): undefined reference to 's3c_device_ohci'
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Recent feedback from design says we need three NOPs in the hardware loop.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Some devices will use the outs* funcs with a length of zero, so make sure
we do not write any data in that case.
Reported-by: NGilbert Inho <gneny@edevice.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

mackerel WVGA LCDC panel expect 33.3MHz for dot-clock,
but current dot-clock was 50.0MHz.
This patch modify clock divider value.
Signed-off-by: NMakoto Ueda <makoto.ueda.ub@renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

ap4evb WVGA LCDC panel expect 33.3MHz for dot-clock,
but current dot-clock was 50.0MHz.
This patch modify clock divider value.
Signed-off-by: NMakoto Ueda <makoto.ueda.ub@renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

omap4 interrupt disable bits is different. On rx kfifo full, the mbox rx
interrupts wasn't getting disabled, and this is causing the rcm stress tests
to hang.
Signed-off-by: NHari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: NArmando Uribe <x0095078@ti.com>
Signed-off-by: NFernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

..similar to what sparc's prom_early_alloc does.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

All interrupt chips are converted. Mark it clean.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

affinity is moving to irq_data. Fix it up.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

The irq descriptors are initialized IRQ_DISABLED in the generic
code. No need to fiddle with them.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Fix typo in call to irq_to_desc()
Signed-off-by: NMorten H. Larsen <m-larsen@post6.tele.dk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

This Patch frees all the dynamically allocated memory
which couldn't have been released in some error hitting cases.
Signed-off-by: NShweta Gulati <shweta.gulati@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>

Temporary strings with volt_* file names should be released after the
debugfs entries are created. While at it, also simplify the string
allocation, and use just snprintf() to create the name.

The patch eliminates kmemleak reports with the following stack trace
(multiple objects depending on HW):

unreferenced object 0xcedbc5a0 (size 64):
  comm "swapper", pid 1, jiffies 4294929375 (age 423.734s)
  hex dump (first 32 bytes):
    76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00  volt_975000.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<c012fee0>] create_object+0x104/0x208
    [<c012dbc8>] kmem_cache_alloc_trace+0xf0/0x17c
    [<c0013f64>] omap_sr_probe+0x314/0x420
    [<c02a1724>] platform_drv_probe+0x18/0x1c
    [<c02a088c>] driver_probe_device+0xc8/0x188
    [<c02a09b4>] __driver_attach+0x68/0x8c
    [<c02a00ac>] bus_for_each_dev+0x44/0x74
    [<c029f9e0>] bus_add_driver+0xa0/0x228
    [<c02a0cac>] driver_register+0xa8/0x130
    [<c02a1b2c>] platform_driver_probe+0x18/0x8c
    [<c0013c1c>] sr_init+0x40/0x74
    [<c005a554>] do_one_initcall+0xc8/0x1a0
    [<c00084f4>] kernel_init+0x150/0x218
    [<c0065d64>] kernel_thread_exit+0x0/0x8
    [<ffffffff>] 0xffffffff
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>

Fix the error in spelling the config option for hw-breakpoints and fix
the build issue that follows.

Signed-off by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>