Commit a6f75aa1 ("drm/exynos: fimd: add HW trigger support") added
hardware trigger support to the FIMD controller driver. But this broke
the display in at least the Exynos5800 Peach Pi Chromebook.

So until the issue is fixed, avoid using HW trigger for the Exynos5420
based boards and use SW trigger as it was before the mentioned commit.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The field value is only checked in fimd_setup_trigger() if .trg_type is
I80_HW_TRG so there's no point in setting this field for the s3c6400 if
is never going to be used since .trg_type is not set.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Don't use the vrefresh field of the DRM mode since this
one is supposed to only be used for debug purpose.
Instead use the clock field which should also provide
much more precise information.

Also sanitize the case in which the clock value
should be zero. We then just default to the maximum
clock divisor.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes suffixes from I80 relevant register definitions,
which are misleading.

This is based on top of below patch set,
     http://www.spinics.net/lists/dri-devel/msg104057.htmlSigned-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds HW trigger support on i80 mode.

Until now, Exynos DRM only supported SW trigger which was set
SWTRGCMD bit of TRIGCON register by CPU to transfer scanout
buffer to Display bus device or panel.

With this patch, the transmission to Display bus device or
panel will be initiated by FIMD controller.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch cleans up wait_for_vblank relevant codes.
wait_for_vblank callback isn't used anymore in Exynos drm driver
so it removes relevant codes. However, display controllers -
FIMD and DECON - still use this function driver internally
to ensure shadow registers to be updated, which resolves
page fault issue so keep it.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

clock_enable callback is used only by FIMD->DP pipeline. Similar but more
universal functionality provides pipeline clock.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <daeinki@gmail.com>

Commit 1feafd3a ("drm/exynos: add
exynos5420 support for fimd") add support for Exynos 5420 SoC, but it
broke enabling display clock feature because of incorrect condition
check. This patch fixes it, so display is working again on platforms
requiring display clock control (i.e. Exynos5250-based SNOW platform).
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Commit 1feafd3a ("drm/exynos: add
exynos5420 support for fimd") add support for Exynos 5420 SoC, but it
broke enabling display clock feature because of incorrect condition
check. This patch fixes it, so display is working again on platforms
requiring display clock control (i.e. Exynos5250-based SNOW platform).
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

struct exynos_drm_panel_info is not used anymore, except exynos_dp,
which can integrate useful fields directly into its context.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds a exynos5420 driver data to support mic_bypass
option to bypass the mic from display out path.
The mic(Mobile image compressor) compresses RGB data from fimd
and send the compressed data to the mipi dsi.
The bypass option can be founded from system register and the bit
is 11. The option bit has been introduced since exynos5420. The
only difference between exynos5250 and exynos5420/exynos5422 is
existence of the bit. Until the MIC is defined and enabled from
device tree, the bypass mic will be default option.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch uses DIV_ROUND_CLOSEST instead of DIV_ROUND_UP
The DIV_ROUND_CLOSEST can be used to find the closest integer
value when we divide some integers.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register
updates only on per-device level, not per-plane level. This patch changes
exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc,
instead of given planes, so driver can handle both cases on their own.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch renames zpos entry to index, because in most places it is
used as index for selecting hardware layer/window instead of
configurable layer position. This will later enable to make the zpos
property configurable.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch fixes trashed display of buffers cropped to very small width.
Even if DMA is unstable and causes tearing when changing the burst size,
it is still better than displaying a garbage.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds common structure for keeping plane configuration and
capabilities data. This patch is inspired by similar code developed by
Tobias Jakobi.

Changelog v2:
- fix vidi_win_types(i) call. vidi_win_types is not a function.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch introduces exynos_drm_plane_state structure, which subclasses
drm_plane_state and holds precalculated data suitable for configuring
Exynos hardware.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

DMA address is a framebuffer attribute and the right place for it is
exynos_drm_framebuffer not exynos_drm_plane. This patch also introduces
helper function for getting dma address of the given framebuffer.

Changelog v2:
- use state->fb instead of plane->base.fb.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Let pm_runtime handle the enabling/disabling of the device with proper
refcnt instead of rely on specific flags to track the enabled state.

Chnagelog v3:
- Revive suspended varable to check the suspend status.

Changelog v2:
- Remove unnecessary changes which removed commit callback from decon drivers
  and modify CONFIG_PM_SLEEP -> CONFIG_PM
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Set one of the planes for each crtc driver as a cursor plane enabled
window managers to fully work on exynos.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Define DEFAULT_WIN as zero to help set the primary plane on all CRTCs.
Some CRTCs were defining a variable to store the default window, but that
is not necessary as the default (primary) window is always the window zero.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

fimd_dp_clock_enable() was setting the always to enabled,
this patch fix this to actually use the value that is set to 'val'.
Reported-by: NEmilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to
60, but it already has the value of 60 when the fimd_mode_fixup() is
called. That means this call is actually pointless and can be removed.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

fimd_update_plane() programs BUF_START[win] and during the update
BUF_START[win] is copied to BUF_START_S[win] (its shadow register)
and starts scanning out, then it raises a irq.

The fimd_irq_handler, in the case we have a pending_fb, will check
the fb value was copied to START_S register and finish the update
in case of success.

Based on patch from Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.

This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

fixup! drm/exynos: check for pending fb before finish update

Only set/clear the update bit in the CRTC's .atomic_begin()/flush()
so all planes are really committed at the same time.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Unify handling of finished plane update to prepare for a following patch
that will check for the START and START_S regs to really make sure that
the plane was updated.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
only a drm_encoder member and the internal exynos_drm_encoders ops that
was directly mapped to the drm_encoder helper funcs.

So now exynos DRM uses struct drm_encoder directly, this removes
completely the struct exynos_drm_encoder.

v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null
pointer.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This functions was just hiding the encoder and connector creation in
a way that was less clean than if we get rid of it. For example,
exynos_encoder ops had .create_connector() defined only because we were
handing off the encoder and connector creation to
exynos_drm_create_enc_conn(). Without this function we can directly call
the create_connector function internally in the code, without the need of
any vtable access.

It also does some refactoring in the code like creating a bind function
for dpi devices.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This struct was just representing encoder information, it was a member of
struct exynos_drm_encoder, so any code trying to access encoder data would
have to go through the encoder struct, get the display struct and then get
the data it want.

During this patchset we also realized that the only data
exynos_drm_encoder needs to store is the drm_encoder parent and the
exynos_drm_encoder_ops.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to
src_{w,h} to make it similar to the atomic state names.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

For some fields the use of struct exynos_drm_plane filled with data from
the plane state just creates a source of duplicated information and
overhead.  Here we change the crtc drivers to access the plane state
directly simplifying the code by not relying on a exynos internal struct.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

We already have the plane pointer in before calling .update_plane() or
disable_plane() so pass it directly to those calls avoiding a new
conversion from zpos to struct exynos_drm_plane.

v2: don't remove check for suspended in FIMD (comment by Joonyoung)
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Rename win_commit() helper to update_plane() and win_disable() to
disable_plane().
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The same check is placed twice in fimd/decon_update_plane(), remove
one of them.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Get rid of legacy DRM vblank function that are less clear to use.
The new ones basically requires only the crtc as parameters.

It also clean ups exynos_drm_crtc_finish_pageflip() parameters as a
consequence.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This is simplest solution about reported problem[1]. It's no problem to
clear channel only when iommu is enabled, if we consider that we cannot
recognize iommu errors when iommu is disabled and it have been valid
until now. But this cannot be nice solution.

[1] https://lkml.org/lkml/2015/7/21/404Reported-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Already drm_iommu_attach_device checks whether support iommu internally.
It should clear channels always regardless iommu support. We didn't know
because we can detect the problem when iommu is enabled, so we don't
have to use drm_iommu_attach_device_if_possible and then we can remove
drm_iommu_attach_device_if_possible and clear_channels function pointer.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>