- 24 5月, 2011 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm: apm-emulation: apm_mutex breaks ACK; remove it APM: take over maintainership
-
- 23 5月, 2011 39 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (346 commits) ASoC: core: Don't set "(null)" as a driver name ALSA: hda - Use LPIB for ATI/AMD chipsets as default Revert "ALSA: hda - Use position_fix=3 as default for AMD chipsets" ASoC: Tegra: Fix compile when debugfs not enabled ASoC: spdif-dit: Add missing MODULE_* SOUND: OSS: Remove Au1550 driver. ALSA: hda - add Intel Panther Point HDMI codec id ALSA: emu10k1 - Add dB range to Bass and Treble for SB Live! ALSA: hda - Remove PCM mixer elements from Virtual Master of realtek ALSA: hda - Fix input-src parse in patch_analog.c ASoC: davinci-mcasp: enable ping-pong SRAM buffers ASoC: add iPAQ hx4700 machine driver ASoC: Asahi Kasei AK4641 codec driver ALSA: hda - Enable Realtek ALC269 codec input layer beep ALSA: intel8x0m: enable AMD8111 modem ALSA: HDA: Add jack detection for HDMI ALSA: sound, core, pcm_lib: fix xrun_log ASoC: Max98095: Move existing NULL check before pointer dereference. ALSA: sound, core, pcm_lib: xrun_log: log also in_interrupt ALSA: usb-audio - Add support for USB X-Fi S51 Pro ...
-
由 Linus Torvalds 提交于
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Eliminate various 'set but not used' warnings x86, SMEP: Fix section mismatch warnings x86, amd: Use _safe() msr access for GartTlbWlk disable code
-
由 Tejun Heo 提交于
02e35228 (block: rescan partitions on invalidated devices on -ENOMEDIA too) relocated partition rescan above explicit bd_set_size() to simplify condition check. As rescan_partitions() does its own bdev size setting, this doesn't break anything; however, rescan_partitions() prints out the following messages when adjusting bdev size, which can be confusing. sda: detected capacity change from 0 to 146815737856 sdb: detected capacity change from 0 to 146815737856 This patch restores the original order and remove the warning messages. stable: Please apply together with 02e35228 (block: rescan partitions on invalidated devices on -ENOMEDIA too). Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NTony Luck <tony.luck@gmail.com> Tested-by: NTony Luck <tony.luck@gmail.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.40' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (131 commits) KVM: MMU: Use ptep_user for cmpxchg_gpte() KVM: Fix kvm mmu_notifier initialization order KVM: Add documentation for KVM_CAP_NR_VCPUS KVM: make guest mode entry to be rcu quiescent state KVM: x86 emulator: Make jmp far emulation into a separate function KVM: x86 emulator: Rename emulate_grpX() to em_grpX() KVM: x86 emulator: Remove unused arg from emulate_pop() KVM: x86 emulator: Remove unused arg from writeback() KVM: x86 emulator: Remove unused arg from read_descriptor() KVM: x86 emulator: Remove unused arg from seg_override() KVM: Validate userspace_addr of memslot when registered KVM: MMU: Clean up gpte reading with copy_from_user() KVM: PPC: booke: add sregs support KVM: PPC: booke: save/restore VRSAVE (a.k.a. USPRG0) KVM: PPC: use ticks, not usecs, for exit timing KVM: PPC: fix exit accounting for SPRs, tlbwe, tlbsx KVM: PPC: e500: emulate SVR KVM: VMX: Cache vmcs segment fields KVM: x86 emulator: consolidate segment accessors KVM: VMX: Avoid reading %rip unnecessarily when handling exceptions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) bnx2x: allow device properly initialize after hotplug bnx2x: fix DMAE timeout according to hw specifications bnx2x: properly handle CFC DEL in cnic flow bnx2x: call dev_kfree_skb_any instead of dev_kfree_skb net: filter: move forward declarations to avoid compile warnings pktgen: refactor pg_init() code pktgen: use vzalloc_node() instead of vmalloc_node() + memset() net: skb_trim explicitely check the linearity instead of data_len ipv4: Give backtrace in ip_rt_bug(). net: avoid synchronize_rcu() in dev_deactivate_many net: remove synchronize_net() from netdev_set_master() rtnetlink: ignore NETDEV_RELEASE and NETDEV_JOIN event net: rename NETDEV_BONDING_DESLAVE to NETDEV_RELEASE bridge: call NETDEV_JOIN notifiers when add a slave netpoll: disable netpoll when enslave a device macvlan: Forward unicast frames in bridge mode to lowerdev net: Remove linux/prefetch.h include from linux/skbuff.h ipv4: Include linux/prefetch.h in fib_trie.c netlabel: Remove prefetches from list handlers. drivers/net: add prefetch header for prefetch users ... Fixed up prefetch parts: removed a few duplicate prefetch.h includes, fixed the location of the igb prefetch.h, took my version of the skbuff.h code without the extra parentheses etc.
-
git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc由 Linus Torvalds 提交于
* 'exec_rm_compat' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: exec: document acct_arg_size() exec: unify do_execve/compat_do_execve code exec: introduce struct user_arg_ptr exec: introduce get_user_arg_ptr() helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Wait properly when flushing the ail list GFS2: Wipe directory hash table metadata when deallocating a directory
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest: ktest: Allow options to be used by other options ktest: Create variables for the ktest config files ktest: Reboot after each patchcheck run ktest: Reboot to good kernel after every bisect run ktest: If test failed due to timeout, print that ktest: Fix post install command
-
由 Paul Parsons 提交于
apm_mutex is locked by a process (e.g. apm -s) at the start of apm_ioctl() and remains locked while pm_suspend() is called. Any subsequent process trying to ACK the suspend (e.g. apmd) is then blocked at the start of apm_ioctl(), causing the suspend to be delayed for 5 seconds in apm_suspend_notifier() while the ACK times out. In short, ACKs don't work. The driver's data structures are sufficiently protected by assorted locks. And pm_suspend() has its own mutex to prevent reentrancy. Consequently there is no obvious requirement for apm_mutex, which evolved from earlier BKL calls. So let's remove it. Signed-off-by: NPaul Parsons <lost.distance@yahoo.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: use mark_buffer_dirty to mark btnode or meta data dirty nilfs2: always set back pointer to host inode in mapping->host nilfs2: get rid of NILFS_I_NILFS nilfs2: use list_first_entry nilfs2: use empty_aops for gc-inodes nilfs2: implement resize ioctl nilfs2: add truncation routine of segment usage file nilfs2: add routine to move secondary super block nilfs2: add ioctl which limits range of segment to be allocated nilfs2: zero fill unused portion of super root block nilfs2: super root size should change depending on inode size nilfs2: get rid of private page allocator nilfs2: merge list_del()/list_add_tail() to list_move_tail()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide/ide-scan-pci.c: Use for_each_pci_dev(). ide: Use linux/mutex.h IDE: ide-floppy, remove unnecessary NULL check drivers/ide/pmac.c: Remove unnecessary casts of pci_get_drvdata ide: fix use after free in ide-acpi
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (28 commits) sparc32: fix build, fix missing cpu_relax declaration SCHED_TTWU_QUEUE is not longer needed since sparc32 now implements IPI sparc32,leon: Remove unnecessary page_address calls in LEON DMA API. sparc: convert old cpumask API into new one sparc32, sun4d: Implemented SMP IPIs support for SUN4D machines sparc32, sun4m: Implemented SMP IPIs support for SUN4M machines sparc32,leon: Implemented SMP IPIs for LEON CPU sparc32: implement SMP IPIs using the generic functions sparc32,leon: SMP power down implementation sparc32,leon: added some SMP comments sparc: add {read,write}*_be routines sparc32,leon: don't rely on bootloader to mask IRQs sparc32,leon: operate on boot-cpu IRQ controller registers sparc32: always define boot_cpu_id sparc32: removed unused code, implemented by generic code sparc32: avoid build warning at mm/percpu.c:1647 sparc32: always register a PROM based early console sparc32: probe for cpu info only during startup sparc: consolidate show_cpuinfo in cpu.c sparc32,leon: implement genirq CPU affinity ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: allow resync_start to be set while an array is active. md/raid10: reformat some loops with less indenting. md/raid10: remove unused variable. md/raid10: make more use of 'slot' in raid10d. md/raid10: some tidying up in fix_read_error md/raid1: improve handling of pages allocated for write-behind. md/raid1: try fix_sync_read_error before process_checks. md/raid1: tidy up new functions: process_checks and fix_sync_read_error. md/raid1: split out two sub-functions from sync_request_write md: make error_handler functions more uniform and correct. md/multipath: discard ->working_disks in favour of ->degraded md/raid1: clean up read_balance. md: simplify raid10 read_balance md/bitmap: fix saving of events_cleared and other state. md: reject a re-add request that cannot be honoured. md: Fix race when creating a new md device.
-
由 Randy Dunlap 提交于
Fix new kernel-doc Error and Warning in <net/mac80211.h>: Error(linux-2.6.39-git5/include/net/mac80211.h:550): cannot understand prototype: 'struct ieee80211_sched_scan_ies ' Warning(linux-2.6.39-git5/include/net/mac80211.h:2289): No description found for parameter 'sta' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The setup_smep function gets calle at resume time too, and is thus not a pure __init function. When marked as __init, it gets thrown out after the kernel has initialized, and when the kernel is suspended and resumed, the code will no longer be around, and we'll get a nice "kernel tried to execute NX-protected page" oops because the page is no longer marked executable. Reported-and-tested-by: NParag Warudkar <parag.lkml@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Commit e66eed65 ("list: remove prefetching from regular list iterators") removed the include of prefetch.h from list.h. The skbuff list traversal still had them. Quoth David Miller: "Please just remove the prefetches. Those are modelled after list.h as I intend to eventually convert SKB list handling to "struct list_head" but we're not there yet. Therefore if we kill prefetches from list.h we should kill it from these things in skbuff.h too." Requested-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
Fix following sparc (32 bit) build error: CC arch/sparc/kernel/asm-offsets.s In file included from include/linux/seqlock.h:29:0, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:57, from arch/sparc/kernel/asm-offsets.c:13: include/linux/spinlock.h: In function 'spin_unlock_wait': include/linux/spinlock.h:360:2: error: implicit declaration of function 'cpu_relax' Most likely caused by commit e66eed65 ("list: remove prefetching from regular list iterators") due to include changes. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
replace function calls when possible call in both irq/non-irq contexts Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiko Carstens 提交于
Get rid of this compile warning: In file included from arch/s390/kernel/compat_linux.c:37:0: include/linux/filter.h:139:23: warning: 'struct sk_buff' declared inside parameter list Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
This also shrinks the object size a little. text data bss dec hex filename 28834 186 8 29028 7164 net/core/pktgen.o 28816 186 8 29010 7152 net/core/pktgen.o.AFTER Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: "David Miller" <davem@davemloft.net>, Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emmanuel Grumbach 提交于
The purpose of the check on data_len is to check linearity, so use the inline helper for this. No overhead and more explicit. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
Add a stack backtrace to the ip_rt_bug path for debugging Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
dev_deactivate_many() issues one synchronize_rcu() call after qdiscs set to noop_qdisc. This call is here to make sure they are no outstanding qdisc-less dev_queue_xmit calls before returning to caller. But in dismantle phase, we dont have to wait, because we wont activate again the device, and we are going to wait one rcu grace period later in rollback_registered_many(). After this patch, device dismantle uses one synchronize_net() and one rcu_barrier() call only, so we have a ~30% speedup and a smaller RTNL latency. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Patrick McHardy <kaber@trash.net>, CC: Ben Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In the old days, we used to access dev->master in __netif_receive_skb() in a rcu_read_lock section. So one synchronize_net() call was needed in netdev_set_master() to make sure another cpu could not use old master while/after we release it. We now use netdev_rx_handler infrastructure and added one synchronize_net() call in bond_release()/bond_release_all() Remove the obsolete synchronize_net() from netdev_set_master() and add one in bridge del_nbp() after its netdev_rx_handler_unregister() call. This makes enslave -d a bit faster. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Jiri Pirko <jpirko@redhat.com> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
These two events are not expected to be caught by userspace. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
s/NETDEV_BONDING_DESLAVE/NETDEV_RELEASE/ as Andy suggested. Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Neil Horman <nhorman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
In the previous patch I added NETDEV_JOIN, now we can notify netconsole when adding a device to a bridge too. Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
V3: rename NETDEV_ENSLAVE to NETDEV_JOIN Currently we do nothing when we enslave a net device which is running netconsole. Neil pointed out that we may get weird results in such case, so let's disable netpoll on the device being enslaved. I think it is too harsh to prevent the device being ensalved if it is running netconsole. By the way, this patch also removes the NETDEV_GOING_DOWN from netconsole netdev notifier, because netpoll will check if the device is running or not and we don't handle NETDEV_PRE_UP neither. This patch is based on net-next-2.6. Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ward 提交于
Unicast frames between macvlan interfaces in bridge mode are not otherwise sent to network taps on the lowerdev (as all other macvlan frames are), so forward the frames to the receive queue of the lowerdev first. Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
No longer needed. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Casting to u32 warns anyways. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-