When use gre vport, openvswitch register a gre_cisco_protocol but
does not supply a err_handler with it. The gre_cisco_err() in
net/ipv4/gre_demux.c expect err_handler be provided with the
gre_cisco_protocol implementation, and call ->err_handler() without
existence check, cause the kernel crash.

This patch provide a err_handler to fix this bug.
This bug introduced by commit aa310701 (openvswitch: Add gre
tunnel support.)
Signed-off-by: NWei Zhang <asuka.com@163.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

When sample action returns with an error, the skb has already been
freed. This patch fix a bug to make sure we don't free it again.
This bug introduced by commit ccb1352e (net: Add Open vSwitch
kernel components.)
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Added VXLAN link configuration for sending UDP checksums, and allowing
TX and RX of UDP6 checksums.

Also, call common iptunnel_handle_offloads and added GSO support for
checksums.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following patch get rid of struct genl_family_and_ops which is
redundant due to changes to struct genl_family.
Signed-off-by: NKyle Mestery <mestery@noironetworks.com>
Acked-by: NKyle Mestery <mestery@noironetworks.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Following patch will be easier to reason about with separate
ovs_flow_cmd_new() and ovs_flow_cmd_set() functions.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

ovs_flow_cmd_del() now allocates reply (if needed) after the flow has
already been removed from the flow table.  If the reply allocation
fails, a netlink error is signaled with netlink_set_err(), as is
already done in ovs_flow_cmd_new_or_set() in the similar situation.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Reduce and clarify locking requirements for ovs_flow_cmd_alloc_info(),
ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info().

A datapath pointer is available only when holding a lock.  Change
ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info() to take a
dp_ifindex directly, rather than a datapath pointer that is then
(only) used to get the dp_ifindex.  This is useful, since the
dp_ifindex is available even when the datapath pointer is not, both
before and after taking a lock, which makes further critical section
reduction possible.

Make ovs_flow_cmd_alloc_info() take an 'acts' argument instead a
'flow' pointer.  This allows some future patches to do the allocation
before acquiring the flow pointer.

The locking requirements after this patch are:

ovs_flow_cmd_alloc_info(): May be called without locking, must not be
called while holding the RCU read lock (due to memory allocation).
If 'acts' belong to a flow in the flow table, however, then the
caller must hold ovs_mutex.

ovs_flow_cmd_fill_info(): Either ovs_mutex or RCU read lock must be held.

ovs_flow_cmd_build_info(): This calls both of the above, so the caller
must hold ovs_mutex.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

For ovs_flow_stats_get() using ovsl_dereference() was wrong, since
flow dumps call this with RCU read lock.

ovs_flow_stats_clear() is always called with ovs_mutex, so can use
ovsl_dereference().

Also, make the ovs_flow_stats_get() 'flow' argument const to make
later patches cleaner.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Incorrect struct name was confusing, even though otherwise
inconsequental.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Move most memory allocations away from the ovs_mutex critical
sections.  vport allocations still happen while the lock is taken, as
changing that would require major refactoring. Also, vports are
created very rarely so it should not matter.

Change ovs_dp_cmd_get() now only takes the rcu_read_lock(), rather
than ovs_lock(), as nothing need to be changed.  This was done by
ovs_vport_cmd_get() already.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Masks are inserted when flows are inserted to the table, so it is
logical to correspondingly remove masks when flows are removed from
the table, in ovs_flow_table_remove().

This allows ovs_flow_free() to be called without locking, which will
be used by later patches.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Use netlink_has_listeners() and NLM_F_ECHO flag to determine if a
reply is needed or not for OVS_FLOW_CMD_NEW, OVS_FLOW_CMD_SET, or
OVS_FLOW_CMD_DEL.  Currently, OVS userspace does not request a reply
for OVS_FLOW_CMD_NEW, but usually does for OVS_FLOW_CMD_DEL, as stats
may have changed.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Remove unnecessary locking from functions that are always called with
appropriate locking.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NThomas Graf <tgraf@redhat.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Flow SET can accept an empty set of actions, with the intended
semantics of leaving existing actions unmodified.  This seems to have
been brokin after OVS 1.7, as we have assigned the flow's actions
pointer to NULL in this case, but we never check for the NULL pointer
later on.  This patch restores the intended behavior and documents it
in the include/linux/openvswitch.h.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Minimize padding in sw_flow_key and move 'tp' top the main struct.
These changes simplify code when accessing the transport port numbers
and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit
systems (128->120 bytes).  These changes also make the keys for IPv4
packets to fit in one cache line.

There is a valid concern for safety of packing the struct
ovs_key_ipv4_tunnel, as it would be possible to take the address of
the tun_id member as a __be64 * which could result in unaligned access
in some systems. However:

- sw_flow_key itself is 64-bit aligned, so the tun_id within is
  always
  64-bit aligned.
- We never make arrays of ovs_key_ipv4_tunnel (which would force
  every
  second tun_key to be misaligned).
- We never take the address of the tun_id in to a __be64 *.
- Whereever we use struct ovs_key_ipv4_tunnel outside the
  sw_flow_key,
  it is in stack (on tunnel input functions), where compiler has full
  control of the alignment.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

We already extract the TCP flags for the key, might as well use that
for stats.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

The 'output' argument of the ovs_nla_put_flow() is the one from which
the bits are written to the netlink attributes.  For SCTP we
accidentally used the bits from the 'swkey' instead.  This caused the
mask attributes to include the bits from the actual flow key instead
of the mask.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Keep kernel flow stats for each NUMA node rather than each (logical)
CPU.  This avoids using the per-CPU allocator and removes most of the
kernel-side OVS locking overhead otherwise on the top of perf reports
and allows OVS to scale better with higher number of threads.

With 9 handlers and 4 revalidators netperf TCP_CRR test flow setup
rate doubles on a server with two hyper-threaded physical CPUs (16
logical cores each) compared to the current OVS master.  Tested with
non-trivial flow table with a TCP port match rule forcing all new
connections with unique port numbers to OVS userspace.  The IP
addresses are still wildcarded, so the kernel flows are not considered
as exact match 5-tuple flows.  This type of flows can be expected to
appear in large numbers as the result of more effective wildcarding
made possible by improvements in OVS userspace flow classifier.

Perf results for this test (master):

Events: 305K cycles
+   8.43%     ovs-vswitchd  [kernel.kallsyms]   [k] mutex_spin_on_owner
+   5.64%     ovs-vswitchd  [kernel.kallsyms]   [k] __ticket_spin_lock
+   4.75%     ovs-vswitchd  ovs-vswitchd        [.] find_match_wc
+   3.32%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_lock
+   2.61%     ovs-vswitchd  [kernel.kallsyms]   [k] pcpu_alloc_area
+   2.19%     ovs-vswitchd  ovs-vswitchd        [.] flow_hash_in_minimask_range
+   2.03%          swapper  [kernel.kallsyms]   [k] intel_idle
+   1.84%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_unlock
+   1.64%     ovs-vswitchd  ovs-vswitchd        [.] classifier_lookup
+   1.58%     ovs-vswitchd  libc-2.15.so        [.] 0x7f4e6
+   1.07%     ovs-vswitchd  [kernel.kallsyms]   [k] memset
+   1.03%          netperf  [kernel.kallsyms]   [k] __ticket_spin_lock
+   0.92%          swapper  [kernel.kallsyms]   [k] __ticket_spin_lock
...

And after this patch:

Events: 356K cycles
+   6.85%     ovs-vswitchd  ovs-vswitchd        [.] find_match_wc
+   4.63%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_lock
+   3.06%     ovs-vswitchd  [kernel.kallsyms]   [k] __ticket_spin_lock
+   2.81%     ovs-vswitchd  ovs-vswitchd        [.] flow_hash_in_minimask_range
+   2.51%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_unlock
+   2.27%     ovs-vswitchd  ovs-vswitchd        [.] classifier_lookup
+   1.84%     ovs-vswitchd  libc-2.15.so        [.] 0x15d30f
+   1.74%     ovs-vswitchd  [kernel.kallsyms]   [k] mutex_spin_on_owner
+   1.47%          swapper  [kernel.kallsyms]   [k] intel_idle
+   1.34%     ovs-vswitchd  ovs-vswitchd        [.] flow_hash_in_minimask
+   1.33%     ovs-vswitchd  ovs-vswitchd        [.] rule_actions_unref
+   1.16%     ovs-vswitchd  ovs-vswitchd        [.] hindex_node_with_hash
+   1.16%     ovs-vswitchd  ovs-vswitchd        [.] do_xlate_actions
+   1.09%     ovs-vswitchd  ovs-vswitchd        [.] ofproto_rule_ref
+   1.01%          netperf  [kernel.kallsyms]   [k] __ticket_spin_lock
...

There is a small increase in kernel spinlock overhead due to the same
spinlock being shared between multiple cores of the same physical CPU,
but that is barely visible in the netperf TCP_CRR test performance
(maybe ~1% performance drop, hard to tell exactly due to variance in
the test results), when testing for kernel module throughput (with no
userspace activity, handful of kernel flows).

On flow setup, a single stats instance is allocated (for the NUMA node
0).  As CPUs from multiple NUMA nodes start updating stats, new
NUMA-node specific stats instances are allocated.  This allocation on
the packet processing code path is made to never block or look for
emergency memory pools, minimizing the allocation latency.  If the
allocation fails, the existing preallocated stats instance is used.
Also, if only CPUs from one NUMA-node are updating the preallocated
stats instance, no additional stats instances are allocated.  This
eliminates the need to pre-allocate stats instances that will not be
used, also relieving the stats reader from the burden of reading stats
that are never used.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

The 5-tuple optimization becomes unnecessary with a later per-NUMA
node stats patch.  Remove it first to make the changes easier to
grasp.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

It's slightly smaller/faster for some architectures.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Add "openvswitch: " prefix to OVS_NLERR output
to match the other OVS_NLERR output of datapath.c
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Each use of pr_<level>_once has a per-site flag.

Some of the OVS_NLERR messages look as if seeing them
multiple times could be useful, so use net_ratelimit()
instead of pr_info_once.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

This is necessary, since u64 is not unsigned long long
in all architectures: u64 could be also uint64_t.
Signed-off-by: NDaniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

This function must cast a const value to a non const value.
By adding an uintptr_t cast the warning is suppressed.
To avoid the cast (proper solution) several function signatures
must be changed.
Signed-off-by: NDaniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

This change, firstly, avoids declaring the formal parameter const,
since it is treated as non const. (to avoid -Wcast-qual)
Secondly, it cast the pointer from void* to u8*, since it is used
in arithmetic (to avoid -Wpointer-arith)
Signed-off-by: NDaniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

In few functions, const formal parameters are assigned or cast to
non-const.
These changes suppress warnings if compiled with -Wcast-qual.
Signed-off-by: NDaniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

net: get rid of SET_ETHTOOL_OPS

Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.

Mostly done via coccinelle script:
@@
struct ethtool_ops *ops;
struct net_device *dev;
@@
-       SET_ETHTOOL_OPS(dev, ops);
+       dev->ethtool_ops = ops;

Compile tested only, but I'd seriously wonder if this broke anything.
Suggested-by: NDave Miller <davem@davemloft.net>
Signed-off-by: NWilfried Klaebe <w-lkml@lebenslange-mailadresse.de>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by several people, rename local_df to ignore_df,
since it means "ignore df bit if it is set".

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows to switch the netns when packet is encapsulated or
decapsulated.
The vxlan socket is openned into the i/o netns, ie into the netns where
encapsulated packets are received. The socket lookup is done into this netns to
find the corresponding vxlan tunnel. After decapsulation, the packet is
injecting into the corresponding interface which may stand to another netns.

When one of the two netns is removed, the tunnel is destroyed.

Configuration example:
ip netns add netns1
ip netns exec netns1 ip link set lo up
ip link add vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0
ip link set vxlan10 netns netns1
ip netns exec netns1 ip addr add 192.168.0.249/24 broadcast 192.168.0.255 dev vxlan10
ip netns exec netns1 ip link set vxlan10 up
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the dst->output() path for ipv4, the code assumes the skb it has to
transmit is attached to an inet socket, specifically via
ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the
provider of the packet is an AF_PACKET socket.

The dst->output() method gets an additional 'struct sock *sk'
parameter. This needs a cascade of changes so that this parameter can
be propagated from vxlan to final consumer.

Fixes: 8f646c92 ("vxlan: keep original skb ownership")
Reported-by: Nlucien xin <lucien.xin@gmail.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two problematic situations.

A deadlock can happen when is_percpu is false because it can get
interrupted while holding the spinlock. Then it executes
ovs_flow_stats_update() in softirq context which tries to get
the same lock.

The second sitation is that when is_percpu is true, the code
correctly disables BH but only for the local CPU, so the
following can happen when locking the remote CPU without
disabling BH:

       CPU#0                            CPU#1
  ovs_flow_stats_get()
   stats_read()
 +->spin_lock remote CPU#1        ovs_flow_stats_get()
 |  <interrupted>                  stats_read()
 |  ...                       +-->  spin_lock remote CPU#0
 |                            |     <interrupted>
 |  ovs_flow_stats_update()   |     ...
 |   spin_lock local CPU#0 <--+     ovs_flow_stats_update()
 +---------------------------------- spin_lock local CPU#1

This patch disables BH for both cases fixing the deadlocks.
Acked-by: NJesse Gross <jesse@nicira.com>

=================================
[ INFO: inconsistent lock state ]
3.14.0-rc8-00007-g632b06aa #1 Tainted: G          I
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes:
(&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
{SOFTIRQ-ON-W} state was registered at:
[<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40
[<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
[<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
[<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch]
[<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch]
[<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch]
[<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch]
[<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0
[<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0
[<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0
[<ffffffff816c0798>] genl_rcv+0x28/0x40
[<ffffffff816bf830>] netlink_unicast+0x100/0x1e0
[<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770
[<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0
[<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0
[<ffffffff8166a911>] __sys_sendmsg+0x51/0x90
[<ffffffff8166a962>] SyS_sendmsg+0x12/0x20
[<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b
irq event stamp: 1740726
hardirqs last  enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840
hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840
softirqs last  enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50
softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&cpu_stats->lock)->rlock);
  <Interrupt>
    lock(&(&cpu_stats->lock)->rlock);

 *** DEADLOCK ***

5 locks held by swapper/0/0:
 #0:  (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320
 #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0
 #2:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840
 #3:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0
 #4:  (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch]

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G          I  3.14.0-rc8-00007-g632b06aa #1
Hardware name:                  /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012
 0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c
 ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005
 ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0
Call Trace:
 <IRQ>  [<ffffffff817cfe3c>] dump_stack+0x4d/0x66
 [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205
 [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180
 [<ffffffff810f8963>] mark_lock+0x223/0x2b0
 [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40
 [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80
 [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch]
 [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch]
 [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40
 [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch]
 [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch]
 [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch]
 [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0
 [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0
 [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0
 [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840
 [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20
 [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840
 [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220
 [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220
 [<ffffffff8176145f>] ip6_output+0x4f/0x1f0
 [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0
 [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50
 [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0
 [<ffffffff810a71e9>] call_timer_fn+0x99/0x320
 [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0
 [<ffffffff8109d47d>] __do_softirq+0x12d/0x480
Signed-off-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_zerocopy can copy elements of the frags array between skbs, but it doesn't
orphan them. Also, it doesn't handle errors, so this patch takes care of that
as well, and modify the callers accordingly. skb_tx_error() is also added to
the callers so they will signal the failed delivery towards the creator of the
skb.
Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The kernel starts out its "jiffies" timer as 5 minutes below zero, as
shown in include/linux/jiffies.h:

  /*
   * Have the 32 bit jiffies value wrap 5 minutes after boot
   * so jiffies wrap bugs show up earlier.
   */
  #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))

The loop in ovs_flow_stats_get() starts out with 'used' set to 0, then
takes any "later" time.  This means that for the first five minutes after
boot, flows will always be reported as never used, since 0 is greater than
any time already seen.
Signed-off-by: NBen Pfaff <blp@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Replace the bh safe variant with the hard irq safe variant.

We need a hard irq safe variant to deal with netpoll transmitting
packets from hard irq context, and we need it in most if not all of
the places using the bh safe variant.

Except on 32bit uni-processor the code is exactly the same so don't
bother with a bh variant, just have a hard irq safe variant that
everyone can use.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ovs_vport_cmd_dump() did rcu_read_lock() only after getting the
datapath, which could have been deleted in between.  Resolved by
taking rcu_read_lock() before the get_dp() call.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Only the first IP fragment can have a TCP header, check for this.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

This fixes crash when userspace does "ovs-dpctl add-dp dev" where dev is
existing non-dp netdevice.

Introduced by:
commit 44da5ae5
"openvswitch: Drop user features if old user space attempted to create datapath"
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Openvswitch defines u64_stats_sync as ->sync rather than ->syncp,
so fails to compile with netdev_alloc_pcpu_stats(). So just rename it to ->syncp.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: 1c213bd2 (net: introduce netdev_alloc_pcpu_stats() for drivers)
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>