This can be used to protect against bitflips in that field, but now mostly
for smartmedia.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This changes the behavier of MTD_OOB_RAW. It used to read both OOB and 
data to the data buffer, however you would still need to specify the 
dummy oob buffer.

This is only used in one place, but makes it hard to read data+oob 
without ECC test, thus I removed that behavier, and fixed the user.

Now MTD_OOB_RAW behaves just like MTD_OOB_PLACE, but doesn't do ECC 
validation
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

nand_do_write_ops was broken in regard to writing several pages, each 
with its own oob.

Although nand_do_write_ops intends to allow such mode, it fails do do so
Probably this was never tested.

Also add missing checks for attempts to write at illegal offsets.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

MTD_OOB_PLACE is supposed to read/write the raw oob data similiar to the 
MTD_OOB_RAW however due to a bug, currently it is not possible to read 
more data that is specified by the oob 'free' regions.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Since all userspace threads are frozen at the time the nand_suspend is called,
they aren't inside any nand function.

We don't call try_to_freeze in nand ether. Thus the only user that can 
be inside the nand functions is an non freezeable kernel thread. Thus we 
can safely wait for it to finish.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds an ability to export sysfs attributes below
the block disk device.

This can be used to pass the udev an information about the FTL
and could include the vendor, serial, version, etc...
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Now that mtd block common layer is prepared for proper hotplug support,
enable it here

Now all users of the mtd device have a chance to put the mtd device
when they are notified to do so, and they have to do so to make hotplug work.

[dwmw2: There's more work to be done to fix hotplug in the general case, but
        this is a reasonable start]
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This prevents a memory leak
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

* Add locking where it was missing.

* Don't do a get_mtd_device in blktrans_open because it would lead to a
  deadlock; instead do that in add_mtd_blktrans_dev.

* Only free the mtd_blktrans_dev structure when the last user exits.

* Flush request queue on device removal.

* Track users, and call tr->release in del_mtd_blktrans_dev
  Due to that ->open and release aren't called more that once.

Now it is safe to call del_mtd_blktrans_dev while the device is still in use.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is the biggest change. To make hotplug possible, and this layer 
clean, the mtd_blktrans_dev now contains everything for a single mtd 
block translation device. Also removed some very old leftovers.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Use these only if you know that you already hold mtd_table_mutex
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Adds NAND Flash Controller driver for MPC5121 Revision 2.
All device features, except hardware ECC and power management,
are supported.
Signed-off-by: NPiotr Ziecik <kosmo@semihalf.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In the branch where pagesize equalled NAND_DATA_ACCESS_SIZE, NumToRead
wasn't decremented in the `while (numToRead > 11)' loop.
Also the first and last while loops were duplicated in both branches.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NLeo Chen <leochen@broadcom.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

There is a bug in nand prefetch read routine, which comes into effect
only if nand device is a 16-bit device (as we have in zoom boards).
This bug is effective only with below combination of conditions:
1. nand deivce, in use, is a 16 bit device
2. nand driver supports 'subpage' read
3. SW ECC is in use

This was not seen old  kernel (ex: .23), because when, in early days,
we tested this (nand prefetch read in LDP boards) there was no
'subpage read' support.
Later when we had subpage read in (.27) kernel, we had hw ecc enabled
always in our internal tree. So, we missed this bug.

This patch fixes the issue.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Removing OMAP NAND driver, when loaded as a module, gives error and
does not get success. This fixes this and makes driver loadable and
removable run time.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fixing below warning in compilation:
drivers/mtd/nand/omap2.c: In function 'omap_write_buf_dma_pref':
drivers/mtd/nand/omap2.c:508: warning: passing argument 2 of
'omap_nand_dma_transfer' discards qualifiers from pointer target type
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Move MANUFACTURER_MACRONIX and MANUFACTURER_SST definitions to the
include/linux/mtd/cfi.h header file and rename them to CFI_MFR_MACRONIX and
CFI_MFR_SST.

All references in drivers/mtd/chips/cfi_cmdset_0002.c are updated to reflect
this.
Signed-off-by: NGuillaume LECERF <glecerf@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

mxc_nand driver must support the RESET Command in order to support
Micron NAND which need a reset before any other command.
Signed-off-by: NEric Benard <eric@eukrea.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The parenthesis was misplaced, upon error a one was shown.

[dwmw2: Fix the code not to do the assignment within the if() statement]
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Otherwise we may hang if we are called from panic() through mtdoops.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add nand lock / unlock routines. At least 'micron' parts
support this.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

... verification for 'nand_erase_nand'

These checks are expected to be used by 'nand_lock' and 'nand_unlock'
routines too. As all these three are block aligned operations.
So, creating a helper function for this makes sense.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14995Reported-by: NR. Diez <rdiezmail-kernelbugzilla@yahoo.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

When machine_is_ceiva() returns zero, 'clps_setup_flash()' returns a
value of an unitialized variable. Fix this.

Spotted by David Binderman.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

register_chrdev() registers minor numbers up to 255, but we can now
potentially have much larger numbers.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

add_mtd_blktrans_dev() imposes a maximum of 257 devices per block
translator.  This was presumably meant to prevent overflow back in the
days of 8-bit minor numbers.  Instead, check against MINORMASK and the
limits of the partition naming scheme.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

idr_get_next() was accidentally not exported when added.  It is about
to be used by mtdcore, which may be built as a module.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Since we allocate struct mtd_blktrans_dev for each block device, we
can add our own structure members to the end.  Therefore embed
struct mtd_blktrans_dev in struct mtdblk_dev and remove the static
array of struct mtdblk_dev.  Also remove the redundant pointer to
struct mtd_info.

This is preparation for removing the static limit on the number of MTD
devices.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

MAX_MTD_DEVICES is about to be removed.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

MAX_MTD_DEVICES is about to be removed.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This removes the need to know the number of MTD devices.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

There are new Blackfin MMR helper functions that use the same name as some
of the local functions in this driver, so have the driver use more specific
names to avoid the issue.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In mtd_ioctl MEMGETREGIONINFO the region_user_info pointer ur
is cast in __kernel space. This produces a number of sparse warnings
like:

warning: cast removes address space of expression
warning: incorrect type in initializer (different address spaces)
   expected unsigned int const [noderef] <asn:1>*register __p
   got unsigned int *<noident>

Since argp is already a void __user * just use it dirrectly without
the cast and make ur a __user *.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In the inline function cfi_build_cmd_addr, the cast of cmd_ofs to an
uint8_t produces a sparse warning of the type:

warning: cast truncates bits from constant value (2aa becomes aa)

Quiet the warning by masking cmd_ofs with 0xff and remove the cast.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fix handling of reads that don't start on a half-word boundary.
Signed-off-by: NJon Ringle <jon@ringle.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The clock must already be off after mtd->suspend.  Disabling it again
results in an negative overflow of the clock usage count.  This didn't
hurt as mxcnd_resume undid it after wake up.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The probe function calls platform_set_drvdata with a valid pointer when
the probe is successful.  As mxcnd_suspend and mxcnd_resume are only
called on bound devices, platform_get_drvdata always returns non-NULL.

This fix isn't critical as the pointer is always valid so it doesn't
matter if the compiler generated code for it or not.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>