- 09 9月, 2008 3 次提交
-
-
由 Christian Lamparter 提交于
p54_set_filter has a way too many unnecessary "magic" parameters and values. This patch axes all superfluous parameters and gives most of the magic values appropriate names. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Replace a hardcoded Analog switch (which breaks on N-PHY) by a call to the switch_analog PHY operation. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This moves the Analog switching code into the PHY files. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 06 9月, 2008 14 次提交
-
-
由 Christian Lamparter 提交于
This patch adds the necessary changes to support LM87 firmwares. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
ath9k uses LED classdev functions, so it needs to either select or depend on them. This patch uses the same selects that ath5k uses... drivers/built-in.o: In function `ath_unregister_led': main.c:(.text+0x138c1d): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `ath_register_led': main.c:(.text+0x139c16): undefined reference to `led_classdev_register' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> cc: Jouni Malinen <jmalinen@atheros.com> Acked-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Both p54pci and p54usb uses a good chunk of device specific code to get the data from the device's eeprom into the drivers memory. So, this patch reduces the code size and will it make life easier if someone wants to implement ethtool eeprom dumping features. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch greatly reduces one of biggest memory waste in the driver. The firmware headers provides the right values for extra head-/tailroom and mtu size which are usually much lower than the old hardcoded ones. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
I'm afraid, I forgot to add the following lines to 7262d593 ("p54pci: rx tasklet refactoring"). These changes are necessary to ensure loop termination. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds definitions for the LP-PHY radios. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds read/write phyops for the LP-PHY and LP-PHY radios. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds template code for the LP-PHY. No actual functionality is implemented. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Sourcecode files for PHY code are named by phy_XXX.{c,h} where XXX is the PHY type. Move the N-PHY code to match the other files. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This moves the remaining code from phy.c to phy_a.c phy.c is removed. No functional change. Just moving code and removing dead code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NStephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nick Kossifidis 提交于
* No code changes... * Split hw.c to multiple files for better maintenance and add some documentation on each file code is going to grow soon (eeprom.c for example is going to get much stuff currently developed on ath_info) so it's better this way. * Rename following functions to maintain naming scheme: ah_setup_xtx_desc -> ah_setup_mrr_tx_desc (Because xtx doesn't say much, it's actually a multi-rate-retry tx descriptor) ath5k_hw_put_tx/rx_buf - > ath5k_hw_set_tx/rxdp ath5k_hw_get_tx/rx_buf -> ath5k_hw_get_tx/rxdp (We don't put any "buf" we set descriptor pointers on hw) ath5k_hw_tx_start -> ath5k_hw_start_tx_dma ath5k_hw_start_rx -> ath5k_hw_start_rx_dma ath5k_hw_stop_pcu_recv -> ath5k_hw_stop_rx_pcu (It's easier this way to identify them, we also have ath5k_hw_start_rx_pcu which completes the set) ath5k_hw_set_intr -> ath5k_hw_set_imr (As in get_isr we set imr here, not "intr") * Move ath5k_hw_setup_rx_desc on ah->ah_setup_rx_desc so we can include support for different rx descriptors in the future * Further cleanups so that checkpatch doesn't complain (only some > 80 col warnings for eeprom.h and reg.h as usual due to comments) Tested on 5211 and 5213 cards and works ok. Changes-licensed-under: ISC Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Acked-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
It is valid to pass &gphy->rfatt and &gphy->bbatt as rfatt and bbatt pointer arguments to the function. So we have to use memmove for the possibly overlapping memory areas. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 8月, 2008 23 次提交
-
-
由 Michael Buesch 提交于
This patch rewrites the TX power recalculation algorithms to scale better with changed enviromnent. If there's low TX traffic, the power will be checked against the desired values every 60 seconds. If there is high TX traffic, the check is redone every 2 seconds. This improves the reaction times a lot and confuses the rate control less. It will also reduce the time it initially takes to tune to a new TX power value. With the old algorithm it could take about 30 to 45 seconds to settle to a new power value. This will happen in about two to four seconds now. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mattias Nissler 提交于
Make sure the skb->data pointer points to the frame data, not the TX descriptor. The frame dumping code relies on that. Signed-off-by: NMattias Nissler <mattias.nissler@gmx.de> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Instead of using the PLCP flag to indicate if the signal value is plcp or the bitrate we should add a new flag to mark the bitrate type explicitely. This is usefull when new types are added later for rt2800. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The txop parameter is supported by rt61pci and rt73usb, and thus should be written to the register instead of using the fixed value set during initialization. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mattias Nissler 提交于
Some hardware configuration registers such as antenna and channel configuration can only be written when the radio is enabled. Previously, we didn't consider this, so some configuration items could be set inconsistently after reenabling the radio. This patch changes the config() handler to only reprogram the hardware when the radio is enabled. Configuration changes that are made while the radio is off are postponed until the radio is switched back on. We also leave the radio turned off during initialization and only enable it when requested by mac80211. This allows us to get rid of the DIRTY_CONFIG flag, because the device is now guaranteed to be completely initialized when brought up by mac80211. Signed-off-by: NMattias Nissler <mattias.nissler@gmx.de> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
If a driver requests additional headroom it should be mapped to DMA as well because it will be send to the hardware as well (as form of extra descriptor). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Some of the flags should be accessed atomically to prevent race conditions. The flags that are most important are those that can change often and indicate the actual state of the device, queue or queue entry. The big flag rename was done to move all state flags to the same naming type as the other rt2x00dev flags and made sure all places where the flags were used were changed. ;) Thanks to Stephen for most of the queue flags updates, which fixes some of the most obvious consequences of the race conditions. Among those the notorious: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. Signed-off-by: NStephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Use kernel doc syntax for comments and remove a few unused macros. Signed-off-by: NSujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
When AR_DurUpdateEna is set, the frame's duration field is updated by the MAC based on the current rate. Signed-off-by: NSujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch moves the all of p54pci's receiver code out of the bloated interrupt handler routine and into a less critical tasklet. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Chr 提交于
The firmware supports 8 different queues and not only 4. So, let's make some room for further tasks (ap/adhoc support) in this area. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Chr 提交于
p54_rx_frame_sent will alter the tx_queue. Therefore we should hold the lock to protect against concurrent p54_assign_address calls. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Ever wondered why the signal was so bad with p54 compared to madwifi, or intel? Well, if you have revision 1 rssi calibration curve points in your EEPROM, then wonder no more. The firmware wants a extra 1 byte padding for every curve point. But someone forgot to put them into the EEPROM's data structure... So now, big question: what happens when we blindly "memcpy" these data points? Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Huang Weiyi 提交于
The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/wireless/b43legacy/main.c drivers/net/wireless/iwlwifi/iwl-3945-led.c drivers/net/wireless/iwlwifi/iwl-led.c drivers/net/wireless/iwlwifi/iwl-rfkill.c This patch removes the said #include <version.h>. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Replace the internal ath9k implementation of multicast/broadcast frame power save buffering (AP mode) in ath9k with use of mac80211 ieee80211_get_buffered_bc() mechanism. This removes quite a bit of duplicated functionality and simplifies the driver part. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Set some semi-random values for HT and add more queues to allow IEEE 802.11n association to be tested with mac80211_hwsim. This with the latest hostapd git tree version can complete a simulated 802.11n association successfully (with mac80211 client MLME). Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
with fixes for v9 and later firmware too. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-