Daniel Borkmann says:

====================
vxlan updates

Did the split into two patches upon request from Cong Wang.

Changelog:

 v1->v2:
  - Removed BUG_ON as it's not needed.
 v2->v3:
  - Removed dev->reg_state check for netns.
 v3->v4:
  - Removed list_del(), we seem to do it in some places and
    in some others not; we agreed it's not really necessary.
  - Split patch into 2 patches, notifier part and module
    unload cleanup part.
====================
Reviewed-by: NCong Wang <cwang@twopensource.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should use vxlan_dellink() handler in vxlan_exit_net(), since
i) we're not in fast-path and we should be consistent in dismantle
just as we would remove a device through rtnl ops, and more
importantly, ii) in case future code will kfree() memory in
vxlan_dellink(), we would leak it right here unnoticed. Therefore,
do not only half of the cleanup work, but make it properly.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can create a vxlan device with an explicit underlying carrier.
In that case, when the carrier link is being deleted from the
system (e.g. due to module unload) we should also clean up all
created vxlan devices on top of it since otherwise we're in an
inconsistent state in vxlan device. In that case, the user needs
to remove all such devices, while in case of other virtual devs
that sit on top of physical ones, it is usually the case that
these devices do unregister automatically as well and do not
leave the burden on the user.

This work is not necessary when vxlan device was not created with
a real underlying device, as connections can resume in that case
when driver is plugged again. But at least for the other cases,
we should go ahead and do the cleanup on removal.

We don't register the notifier during vxlan_newlink() here since
I consider this event rather rare, and therefore we should not
bloat vxlan's core structure unecessary. Also, we can simply make
use of unregister_netdevice_many() to batch that. fdb is flushed
upon ndo_stop().

E.g. `ip -d link show vxlan13` after carrier removal before
this patch:

5: vxlan13: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default
    link/ether 1e:47:da:6d:4d:99 brd ff:ff:ff:ff:ff:ff promiscuity 0
    vxlan id 13 group 239.0.0.10 dev 2 port 32768 61000 ageing 300
                                 ^^^^^
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
Intel Wired LAN Driver Updates, ixgbe: Add LER support

The following patches add Live Error Recovery (LER) support to the
ixgbe driver. This support also improves behavior in Thunderbolt
environments. This involves checking all register reads for a
value of all ones and when that is seen, to read the status
register, which should never properly return all ones, to
confirm whether the received value was correct. When this detects
a removal, the hw_addr field is cleared to indicate the removal.
This then blocks subsequent access to the device registers.

All register access macros have been changed to static inline
functions and all register accesses now use them.· Macro versions
are temporarily provided.

The __IXGBE_DOWN bit is no longer overloaded to also mean that
device removal has been initiated. Now the bit can be used to
protect ixgbe_down from multiple entry via test_and_set_bit. A
needed smp_mb__before_clear_bit was also added.

V2 Changes:
- Use ACCESS_ONCE where needed, thanks to Ben Hutchings
- Fix crash on module removal
- Use boolean values for boolean returns instead of 0 and 1
- Reword Kconfig help text

V3 Changes:
- Drop config option, per David Miller
- Drop tail register write checks, per Alexander Duyck
- Change writeq implementation to a static inline, thanks to Joe Perches

V4 Changes:
- Change __IXGBE_REMOVE to __IXGBE_REMOVING, per Scott Feldman's comment
- Add #define writeq writeq, per Alexander Duyck
- Change static inline functions to lower case, per David Miller
- Use new lower case names in added and modified register accesses
- Provide temporary upper case macros for register access functions
- Change IXGBE_REMOVED from macro to static inline and change references
- Correct IXGBE_WRITE_FLUSH to properly enclose parameter expansion
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Additional checks are needed for a detected removal not to cause
problems. Some involve simply avoiding a lot of stuff that can't
do anything good, and also cases where the phony return value can
cause problems. In addition, down the adapter when the removal is
sensed.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent writes to an adapter that has been detected as removed
by a previous failing read. This also fixes some include file
ordering confusion that this patch revealed.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check all register reads for adapter removal by checking the status
register after any register read that returns 0xFFFFFFFF. Since the
status register will never return 0xFFFFFFFF unless the adapter is
removed, such a value from a status register read confirms the
removal.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the ethtool register test use the normal register accessor
functions. Also eliminate macros used for calling register test
functions to make error exits clearer. Use boolean values for
boolean returns instead of 0 and 1.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kernel coding standard prefers static inline functions instead
of macros, so use them for register accessors. This is to prepare
for adding LER, Live Error Recovery, checks to those accessors.

Temporarily provide macros for calling the new static inline
accessors until all references are changed.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ixgbe_down function can now prevent multiple executions by
doing test_and_set_bit on __IXGBE_DOWN. This did not work before
introduction of the __IXGBE_REMOVING bit, because of overloading
of __IXGBE_DOWN. Also add smp_mb__before_clear_bit call before
clearing the __IXGBE_DOWN bit.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a bit, __IXGBE_REMOVING, to indicate that the module is being
removed. The __IXGBE_DOWN bit had been overloaded for this purpose,
but that leads to trouble. A few places now check both __IXGBE_DOWN
and __IXGBE_REMOVE. Notably, setting either bit will prevent service
task execution.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e that are primarily minor fixes or
general cleanup.

Shannon fixes a bug where the VMDq queue is not associated with the
right setup within the hardware.

Mitch provides a patch adjusting where the VF is reset and another
one adding meaningful context to a message.

Jesse cleans up white space comments and parenthesis.

Catherine bumps the version.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the driver version to 0.3.30-k.
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove some un-necessary parenthesis.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix some whitespace and comment issues.

Change-ID: I1587599e50ce66fd389965720e86f9e331d86643
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make this message mean something, rather than just spitting out a VSI id
without any context whatsoever.

Change-ID: Iafb906c6db46d4b5dcbe84adc9ed44730d08bd42
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a bug where the queue was not associated with the right set-up
within the hardware.  The fix is to use the right QTX_CTL VSI type
when associating it to the VSI.

Change-ID: I65ef6c5a8205601c640a6593e4b7e78d6ba45545
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This write done at the end of VF reset and should not be performed here.

Change-ID: I4d89813b68c6173184293868a6f26cf559bc2405
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_gso_segment() and tcp_gro_receive() no longer need to be
exported. IPv4 and IPv6 offloads are statically linked.

Note that tcp_gro_complete() is still used by bnx2x, unfortunately.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ying Xue says:

====================
use appropriate APIs to get interfaces

Under rtnl_lock protection, we should use __dev_get_name/index()
rather than dev_get_name()/index() to find interface handlers
because the former interfaces can help us avoid to change interface
reference counter.

v2 changes:
 - Change return value of nl80211_set_wiphy() to 0 in patch #10
   by johannes's suggestion.
 - Add 'Acked-by' into several patches which were acknowledged by
   corresponding maintainers.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As __cfg80211_rdev_from_attrs(), nl80211_dump_wiphy_parse() and
nl80211_set_wiphy() are all under rtnl_lock protection,
__dev_get_by_index() instead of dev_get_by_index() should be used
to find interface handler in them allowing us to avoid to change
interface reference counter.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As cgw_create_job() is always under rtnl_lock protection,
__dev_get_by_index() instead of dev_get_by_index() should be used to
find interface handler in it having us avoid to change interface
reference counter.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chains indicate that chnl_net_open() is under
rtnl_lock protection as __dev_open() is protected by rtnl_lock.
So if __dev_get_by_index() instead of dev_get_by_index() is used
to find interface handler in it, this would help us avoid to change
interface reference counter.

__dev_open()
  chnl_net_open()

Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chains indicate that batadv_is_on_batman_iface()
is always under rtnl_lock protection as call_netdevice_notifier()
is protected by rtnl_lock. So if __dev_get_by_index() rather than
dev_get_by_index() is used to find interface handler in it, this
would help us avoid to change interface reference counter.

call_netdevice_notifier()
  batadv_hard_if_event()
    batadv_hardif_add_interface()
      batadv_is_valid_iface()
        batadv_is_on_batman_iface()

Cc: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chains indicate that vxlan_fdb_parse() is
under rtnl_lock protection. So if we use __dev_get_by_index()
instead of dev_get_by_index() to find interface handler in it,
this would help us avoid to change interface reference counter.

rtnetlink_rcv()
  rtnl_lock()
  netlink_rcv_skb()
    rtnl_fdb_add()
      vxlan_fdb_add()
        vxlan_fdb_parse()
  rtnl_unlock()

rtnetlink_rcv()
  rtnl_lock()
  netlink_rcv_skb()
    rtnl_fdb_del()
      vxlan_fdb_del()
        vxlan_fdb_parse()
  rtnl_unlock()

Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain we can identify that dn_cache_getroute() is
protected under rtnl_lock. So if we use __dev_get_by_index() instead
of dev_get_by_index() to find interface handlers in it, this would help
us avoid to change interface reference counter.

rtnetlink_rcv()
  rtnl_lock()
    netlink_rcv_skb()
      dn_cache_getroute()
  rtnl_unlock()
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain indicates that dcb_doit() is protected
under rtnl_lock. So if we use __dev_get_by_name() instead of
dev_get_by_name() to find interface handlers in it, this would
help us avoid to change interface reference counter.

rtnetlink_rcv()
  rtnl_lock()
  netlink_rcv_skb()
    dcb_doit()
  rtnl_unlock()

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain indicates that eql_ioctl(), eql_enslave(),
eql_emancipate(), eql_g_slave_cfg() and eql_s_slave_cfg() are
protected under rtnl_lock. So if we use __dev_get_by_name() instead
of dev_get_by_name() to find interface handlers in them, this would
help us avoid to change interface reference counters.

dev_ioctl()
  rtnl_lock()
    dev_ifsioc()
      eql_ioctl()
        eql_enslave()
	eql_emancipate()
	eql_g_slave_cfg()
	eql_s_slave_cfg()
  rtnl_unlock()

Additionally we also change their return values from -EINVAL to
-ENODEV in case that interfaces are no found.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain indicates that bond_do_ioctl() is protected
under rtnl_lock. If we use __dev_get_by_name() instead of
dev_get_by_name() to find interface handler in it, this would
help us avoid to change reference counter of interface once.

dev_ioctl()
  rtnl_lock()
  dev_ifsioc()
    bond_do_ioctl()
  rtnl_unlock()

Additionally we also change the coding style in bond_do_ioctl(),
letting it more readable for us.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain denotes that both do_reset() and do_del_chan()
are protected under rtnl_lock. If we use __dev_get_by_name() instead of
dev_get_by_name() to find interface handlers in them, this would help
us avoid to change interface reference counter.

dev_ioctl()
  rtnl_lock()
  dev_ifsioc()
    c4_ioctl()
      do_reset()
      do_del_chan()
  rtnl_unlock()
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: remove limitation

Remove the limitation between ecm mode and vendor mode.

v2: replace the patch #3 with "ecm and vendor modes coexist".
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the limitation that the ecm and r8152 drivers couldn't coexist.
 - Remove the devices from the blacklist of relative drivers.
 - Remove usb_driver_set_configuration() from r8152 driver.
 - Modify the id_table of the r8152 driver for the vendor mode only.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the following warnings and error:
 - WARNING: usb_free_urb(NULL) is safe this check is probably not required
 - WARNING: kfree(NULL) is safe this check is probably not required
 - ERROR: do not use C99 // comments
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The r8152 could support RTL8153. Update the relative descriptor.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bgmac_mii_register() and register_netdev() both return appropriate error
codes for the failures they would encounter, propagate this error code
instead of overriding the value with -ENOTSUPP which is not the correct
error code to return.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change move anycast_src_echo_reply sysctl with other ipv6 sysctls.
Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NFrancois-Xavier Le Bail <fx.lebail@yahoo.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It confuses Smatch when we check "sinit" for NULL and then non-NULL and
that causes a false positive warning later.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
atheros: modify statistics code

Following Ben Hutchings's advice on how to fill net_stats in alx [1],
this patch modifies the other atheros ethernet drivers
similarly. Minor whitespace/empty line changes in atl1c and atl1e to
make the code completely consistent between atl1c, atl1e, and alx.

I don't have this hardware, so these patches have only been
compile-tested.

v2 (changes only in atl1):
 - don't set soft_stats.rx_missed_errors (Ben)
 - add errors to soft_stats.{rx,tx}_packets (Ben)
 - add soft_stats.rx_dropped field and update soft_stats.rx_dropped
   instead of netdev->stats (overwritten) outside of the stats
   update function

Detail of the changes (v1):
* atl1/atl1c/atl1e
  - fix collisions computation
  - rx_dropped = rx_rrd_ov
  - rx_over_errors = 0
  - rx_missed_errors = 0
  - X_packets = X_ok + X_errors

* only atl1c/atl1e
  - add rx_rxf_ov to rx_errors

[1] http://www.spinics.net/lists/netdev/msg264930.html
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>