Forgot two special driver declarations and sorted the list.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added support for 3 keyboards with increasing illumination capabilities
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The LEGO-wiimote uses a different VID than the Nintendo ID. The device is
technically the same so add the ID.

Cc: <stable@vger.kernel.org> # 3.11+
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Revert some changes done in 77463838.

Revert all changes done in hidinput_calc_abs_res as it mistakingly used
"Unit" item exponent nibbles to affect resolution value. This wasn't
breaking resolution calculation of relevant axes of any existing
devices, though, as they have only one dimension to their units and thus
1 in the corresponding nible.

Revert to reading "Unit Exponent" item value as a signed integer in
hid_parser_global to fix reading specification-complying values. This
fixes resolution calculation of devices complying to the HID standard,
including Huion, KYE, Waltop and UC-Logic graphics tablets which have
their report descriptors fixed by the drivers.

Explanations follow.

There are two "unit exponents" in HID specification and it is important
not to mix them. One is the global "Unit Exponent" item and another is
nibble values in the global "Unit" item. See 6.2.2.7 Global Items.

The "Unit Exponent" value is just a signed integer and is used to scale
the integer resolution unit values, so fractions can be expressed.

The nibbles of "Unit" value are used to select the unit system (nibble
0), and presence of a particular basic unit type in the unit formula and
its *exponent* (or power, nibbles 1-6). And yes, the latter is in two
complement and zero means absence of the unit type.

Taking the representation example of (integer) joules from the
specification:

[mass(grams)][length(centimeters)^2][time(seconds)^-2] * 10^-7

the "Unit Exponent" would be -7 (or 0xF9, if stored as a byte) and the
"Unit" value would be 0xE121, signifying:

Nibble  Part        Value   Meaning
-----   ----        -----   -------
0       System      1       SI Linear
1       Length      2       Centimeters^2
2       Mass        1       Grams
3       Time        -2      Seconds^-2

To give the resolution in e.g. hundredth of joules the "Unit Exponent"
item value should have been -9.

See also the examples of "Unit" values for some common units in the same
chapter.

However, there is a common misunderstanding about the "Unit Exponent"
value encoding, where it is assumed to be stored the same as nibbles in
"Unit" item. This is most likely due to the specification being a bit
vague and overloading the term "unit exponent". This also was and still
is proliferated by the official "HID Descriptor Tool", which makes this
mistake and stores "Unit Exponent" as such. This format is also
mentioned in books such as "USB Complete" and in Microsoft's hardware
design guides.

As a result many devices currently on the market use this encoding and
so the driver should support them.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON
DarkGlider Gaming mouse to use the same corrections of the report
descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES
at the same offsets in the reported descriptor.
Tested on the hardware.
Signed-off-by: NAnders F. U. Kiær <ablacksheep@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When dealing with usage_index, be sure to properly use unsigned instead of
int to avoid overflows.

When working on report fields, always validate that their report_counts are
in bounds.
Without this, a HID device could report a malicious feature report that
could trick the driver into a heap overflow:

[  634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500
...
[  676.469629] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2897

Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Many drivers need to validate the characteristics of their HID report
during initialization to avoid misusing the reports. This adds a common
helper to perform validation of the report exisitng, the field existing,
and the expected number of values within the field.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Defensively check that the field to be worked on is not NULL.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

KonePureOptical is a KonePure with different sensor.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The "Report ID" field of a HID report is used to build indexes of
reports. The kernel's index of these is limited to 256 entries, so any
malicious device that sets a Report ID greater than 255 will trigger
memory corruption on the host:

[ 1347.156239] BUG: unable to handle kernel paging request at ffff88094958a878
[ 1347.156261] IP: [<ffffffff813e4da0>] hid_register_report+0x2a/0x8b

CVE-2013-2888
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Detecting Win 8 multitouch devices in core allows us to set quirks
before the device is parsed through hid_hw_start().
It also simplifies the detection of those devices in hid-multitouch and
makes the handling of those devices cleaner.

As Win 8 multitouch panels are in the group multitouch and rely on a
special feature to be detected, this patch adds a bitfield in the parser.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Win 8 detection is sufficiently complex to warrant use of the full
parser code, in spite of the inferred memory usage. Therefore, we can use
the existing HID parser in hid-core for hid_scan_report() by re-using the
code from hid_open_report(). hid_parser_global, hid_parser_local and
hid_parser_reserved does not have any side effects. We just need to
reimplement the MAIN_ITEM callback to have a proper parsing without side
effects.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The dev_attrs field of struct bus_type is going away soon, dev_groups
should be used instead.  This converts the HID bus code to use
the correct field.
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver currently only supports the Dual Arcade controller.
It fixes the negative axis event values (the devices sends -2) to match the
logical axis minimum of the HID report descriptor (the report announces -1).
It is needed because hid-input discards out of bounds values.
Signed-off-by: NOlivier Scherler <oscherler@ithink.ch>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

implement() is setting bytes in LE data stream. In case the data is not
aligned to 64bits, it reads past the allocated buffer. It doesn't really
change any value there (it's properly bitmasked), but in case that this
read past the boundary hits a page boundary, pagefault happens when
accessing 64bits of 'x' in implement(), and kernel oopses.

This happens much more often when numbered reports are in use, as the
initial 8bit skip in the buffer makes the whole process work on values
which are not aligned to 64bits.

This problem dates back to attempts in 2005 and 2006 to make implement()
and extract() as generic as possible, and even back then the problem
was realized by Adam Kroperlin, but falsely assumed to be impossible
to cause any harm:

  http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html

I have made several attempts at fixing it "on the spot" directly in
implement(), but the results were horrible; the special casing for processing
last 64bit chunk and switching to different math makes it unreadable mess.

I therefore took a path to allocate a few bytes more which will never make
it into final report, but are there as a cushion for all the 64bit math
operations happening in implement() and extract().

All callers of hid_output_report() are converted at the same time to allocate
the buffer by newly introduced hid_alloc_report_buf() helper.

Bruno noticed that the whole raw_size test can be dropped as well, as
hid_alloc_report_buf() makes sure that the buffer is always of a proper
size.
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Genius Gx Imperator Keyboard presents the same problem in its report
descriptors than Genius Gila Gaming Mouse.
Use the same fixup for both.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=928561Reported-and-tested-by: NHonza Brazdil <jbrazdil@redhat.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When device with the DELIMITER tag in its report descriptor is encountered
during parsing, it's mistakenly immediately refused by HID core for no
justifiable reason.

[jkosina@suse.cz: polish changelog]
Signed-off-by: NPaul Chavent <paul.chavent@onera.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Genius Gila Gaming Mouse presents an obviously wrong report descriptor.
the Consumer control (report ID 3) is the following:
0x05, 0x0c,                    // Usage Page (Consumer Devices)       105
0x09, 0x01,                    // Usage (Consumer Control)            107
0xa1, 0x01,                    // Collection (Application)            109
0x85, 0x03,                    //   Report ID (3)                     111
0x19, 0x00,                    //   Usage Minimum (0)                 113
0x2a, 0xff, 0x7f,              //   Usage Maximum (32767)             115
0x15, 0x00,                    //   Logical Minimum (0)               118
0x26, 0xff, 0x7f,              //   Logical Maximum (32767)           120
0x75, 0x10,                    //   Report Size (16)                  123
0x95, 0x03,                    //   Report Count (3)                  125
0x81, 0x00,                    //   Input (Data,Arr,Abs)              127
0x75, 0x08,                    //   Report Size (8)                   129
0x95, 0x01,                    //   Report Count (1)                  131
0x81, 0x01,                    //   Input (Cnst,Arr,Abs)              133
0xc0,                          // End Collection                      135

So the first input whithin this report has a count of 3 but a usage range
of 32768. So this value is obviously wrong as it should not be greater than
the report count.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=959721Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8
(0x0291, 0x0292, 0x0293). The touchpad is handled in a separate
bcm5974 patch, as usual.

Cc: stable@vger.kernel.org
Reported-and-tested-by: NBrad Ford <plymouthffl@gmail.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

hdrw->raw event can return three different return value types:

- ret < 0	indicates that the hdrv driver found an error while parsing
- ret == 0	indicates no error has been encountered, and the driver has
          	processed the report
- ret > 0	indicates that there was no parsing error, and the driver hasn't
		processed the event.

Calling hid_report_raw_event() has to be called appropriately so that it
reflects what has been done by ->raw_event() callback, otherwise we might
updates of the in-kernel structure are lost upon arrival of the report, which
is wrong.
Reported-and-tested-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-and-tested-by: NDaniel Leung <daniel.leung@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is a driver for ELO 4000/4500 devices which report themselves as
HID devices, but do not really send HID events on touch. So we
introduce a new HID 'quirk' driver with a raw_event handler where we
take care of those events.

What we need additionally is an input_configured hook, because the
device does not mention anything about PRESSURE and TOUCH in its
report descriptor, but it actually generate those. So we set the bits
in the corresponding input_dev in that hook.

Thanks to Petr Ostadal who was willing to test the driver. The rest of
Cc's listed below had something to do with that driver over the years
in our enterprise tree.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Tested-by: NPetr Ostadal <postadal@suse.cz>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Egbert Eich <eich@suse.com>
Cc: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add hid-huion.c with support for Huion 580 tablet, which is simple
8x5" tablet with 4000LPI resolution and 2048 levels pressure-sensitive
pen manufactured by the Chinese company Huion.

The driver fixes incorrect report descriptor sent by the device,
performs custom initialization required to switch the tablet into
its native resolution mode and inverts the in-range bit.
Signed-off-by: NMartin Rusko <martin.rusko@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add device IDs of devices driven by hid-holtek-mouse to
hid_have_special_driver[].
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for PS2/3 Buzz controllers into hid-sony

It has been tested on Debian 7 with kernel version 3.10.0-rc2. Unfortunately
I can't test the patch with a regular six-axis controller myself.
Signed-off-by: NColin Leitner <colin.leitner@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add a quirk to ignore Jabra speakerphone 410 and 510 devices HID
interface.
On those devices, the USB audio interface is working nicely,
but the HID interface is not working with the kernel usbhid driver,
and it requires a specific userspace program.
We could unbind it from userspace but just attaching the usbhid driver has
sometimes nasty effects:
either confusing the device state machine or triggering a storm of volume key
events making eventual sound UI blinking like crazy.
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 2353f2be ("HID: protect hid_debug_list") introduced mutex
locking around debug_list access to prevent SMP races when debugfs
nodes are being operated upon by multiple userspace processess.

mutex is not a proper synchronization primitive though, as the hid-debug
callbacks are being called from atomic contexts.

We also have to be careful about disabling IRQs when taking the lock
to prevent deadlock against IRQ handlers.

Benjamin reports this has also been reported in RH bugzilla as bug #958935.

 ===============================
 [ INFO: suspicious RCU usage. ]
 3.9.0+ #94 Not tainted
 -------------------------------
 include/linux/rcupdate.h:476 Illegal context switch in RCU read-side critical section!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 4 locks held by Xorg/5502:
  #0:  (&evdev->mutex){+.+...}, at: [<ffffffff81512c3d>] evdev_write+0x6d/0x160
  #1:  (&(&dev->event_lock)->rlock#2){-.-...}, at: [<ffffffff8150dd9b>] input_inject_event+0x5b/0x230
  #2:  (rcu_read_lock){.+.+..}, at: [<ffffffff8150dd82>] input_inject_event+0x42/0x230
  #3:  (&(&usbhid->lock)->rlock){-.....}, at: [<ffffffff81565289>] usb_hidinput_input_event+0x89/0x120

 stack backtrace:
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  0000000000000001 ffff8800689c7c38 ffffffff816f249f ffff8800689c7c68
  ffffffff810acb1d 0000000000000000 ffffffff81a03ac7 000000000000019d
  0000000000000000 ffff8800689c7c90 ffffffff8107cda7 0000000000000000
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff810acb1d>] lockdep_rcu_suspicious+0xfd/0x130
  [<ffffffff8107cda7>] __might_sleep+0xc7/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b
 BUG: sleeping function called from invalid context at kernel/mutex.c:413
 in_atomic(): 1, irqs_disabled(): 1, pid: 5502, name: Xorg
 INFO: lockdep is turned off.
 irq event stamp: 1098574
 hardirqs last  enabled at (1098573): [<ffffffff816fb53f>] _raw_spin_unlock_irqrestore+0x3f/0x70
 hardirqs last disabled at (1098574): [<ffffffff816faaf5>] _raw_spin_lock_irqsave+0x25/0xa0
 softirqs last  enabled at (1098306): [<ffffffff8104971f>] __do_softirq+0x18f/0x3c0
 softirqs last disabled at (1097867): [<ffffffff81049ad5>] irq_exit+0xa5/0xb0
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  ffffffff81a03ac7 ffff8800689c7c68 ffffffff816f249f ffff8800689c7c90
  ffffffff8107ce60 0000000000000000 ffff8800689c7fd8 ffff88006a62c800
  ffff8800689c7d10 ffffffff816f7770 ffff8800689c7d00 ffffffff81312ac4
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff8107ce60>] __might_sleep+0x180/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b
Reported-by: Nmajianpeng <majianpeng@gmail.com>
Reported-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

It looks like the manual merge 0d69a3c7 ("Merge
branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus") accidentally
removed Sony RF receiver with USB product id 0x0374 from the "have special
driver" list, effectively nullifying a4649184
("HID: add support for Sony RF receiver with USB product id 0x0374"). Add the
device back to the list.

Cc: stable@vger.kernel.org
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Accesses to hid_device->hid_debug_list are not serialized properly, which
could result in SMP concurrency issues when HID debugfs events are accessesed
by multiple userspace processess.

Serialize all the list operations by a mutex.

Spotted by Al Viro.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

No semantic changes, but hid_dump_report should be in hid-debug.c, not
in hid-core.c
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patche adds PID of Japanese Natual Ergonomic Keyboard 4000. HID
NE4K driver depends on this PID for determining its quirks. F14-F18 keys
would not work without the patch.
Signed-off-by: NAdam Jiang <jiang.adam@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This driver was originally written by James McKenzie, updated by
Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend
support added.
I ported it to the HID subsystem, in order to simplify it a litle
and allow lirc to use it through hiddev.

More recent versions of the IR receiver are also supported through
a patch by Alex Karpenko. The patch also adds support for the 2nd
and 5th generation of the controller, and the menu key on newer
brushed metal remotes.
Tested-by: NFabien André <fabien.andre@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This adds the 2nd generation Wii Remote IDs. They have a different
Bluetooth chipset (CSR instead of Broadcom) and are more restrictive in
what they accept as input. Hence, you need up-to-date BlueZ and
Bluetooth HIDP modules to use these devices.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch reverts commit 0322bd39 ("usb hid quirks for Masterkit MA901 usb
radio") and adds checks in hid_ignore() for Masterkit MA901 usb radio device.
This usb radio device shares USB ID with many Atmel V-USB (and probably other)
devices so patch sorts things out by checking name, vendor, product of hid device.
Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Userland-tools can already be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch separates struct hid_device's driver_lock into two. The
goal is to allow hid device drivers to receive input during their
probe() or remove() function calls. This is necessary because some
drivers need to communicate with the device to determine parameters
needed during probe (e.g., size of a multi-touch surface), and if
possible, may perfer to communicate with a device on host-initiated
disconnect (e.g., to put it into a low-power state).

Historically, three functions used driver_lock:

- hid_device_probe: blocks to acquire lock
- hid_device_remove: blocks to acquire lock
- hid_input_report: if locked returns -EBUSY, else acquires lock

This patch adds another lock (driver_input_lock) which is used to
block input from occurring. The lock behavior is now:

- hid_device_probe: blocks to acq. driver_lock, then driver_input_lock
- hid_device_remove: blocks to acq. driver_lock, then driver_input_lock
- hid_input_report: if driver_input_lock locked returns -EBUSY, else
  acquires driver_input_lock

This patch also adds two helper functions to be called during probe()
or remove(): hid_device_io_start() and hid_device_io_stop(). These
functions lock and unlock, respectively, driver_input_lock; they also
make a note of whether they did so that hid-core knows if a driver has
changed the lock state.

This patch results in no behavior change for existing devices and
drivers. However, during a probe() or remove() function call in a
driver, that driver may now selectively call hid_device_io_start() to
let input events come through, then optionally call
hid_device_io_stop() to stop them.
Signed-off-by: NAndrew de los Reyes <adlr@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Instead of limiting HID sensors to USB and I2C busses we can just make
everything that has usage page of HID_UP_SENSOR to be included in
HID_GROUP_SENSOR_HUB group. This allows the sensor-hub to work over
bluetooth (and other transports) as well.
Reported-by: NAlexander Holler <holler@ahsoftware.de>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-By: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The ThingM blink(1) is an open source hardware USB RGB LED. It contains
an internal EEPROM, allowing to configure up to 12 light patterns. A
light pattern is a RGB color plus a fade time. This driver registers a
LED class instance with additional sysfs attributes to support basic
functions such as setting RGB colors, fade and playing. Other functions
are still accessible through the hidraw interface.

At this time, the only documentation for the device is the firmware
source code from ThingM, plus a few schematics. They are available at:

https://github.com/todbot/blink1

This patch is version 3. It updates the name of the source file, the
driver and the led sysfs entry, according to comments from Jiri Kosina
and Simon Wood.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

These are simple data acquistion boards, not HID devices and are handled
by the vmk80xx comedi driver.  At least one of them (10cf:5500)
misidentifies itself as a HID in its USB interface descriptor.  Ignore
all these devices.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since the advent of HID over I2C protocol, it is possible to have sensor
hubs behind I2C bus as well. We can autodetect this in a same way than USB
sensor hubs.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This callback is called when the parsing of the report has been done
by hid-core (so after the calls to .event). The hid drivers can now
have access to the whole report by relying on the values stored in
the different fields.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>