Replace TMU_SUPPORT_FALLING_TRIP flag check in
exynos[4210,5440]_tmu_control() by an explicit check
for a SoC type (all SoC types except Exynos4210 have
TMU_SUPPORT_FALLING_TRIP flag set in their struct
exynos_tmu_init_data instances).

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Add ->tmu_clear_irqs method to struct exynos_tmu_data and use
it instead exynos_tmu_clear_irqs().  Then add ->tmu_clear_irqs
implementations for Exynos4210+ and Exynos5440.  Finally
remove no longer needed reg->tmu_int[stat,clear] abstractions
and struct exynos_tmu_registers instances.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Add ->tmu_set_emulation method to struct exynos_tmu_data and
use it in exynos_tmu_set_emulation().  Then add ->tmu_set_emulation
implementations for Exynos4412+ and Exynos5440.  Finally remove
no longer needed reg->emul_con abstraction.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Factor out code for preparing EMUL_CON register value from
exynos_tmu_set_emulation() into get_emul_con_reg().

This is a preparation for introducing per-SoC type
tmu_set_emulation method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Add ->tmu_read method to struct exynos_tmu_data and use it
in exynos_tmu_control().  Then add ->tmu_read implementations
for Exynos4210, Exynos4412+ and Exynos5440.  Finally remove
no longer needed reg->tmu_cur_temp abstractions.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Add ->tmu_control method to struct exynos_tmu_data and use it
in exynos_tmu_control().  Then add ->tmu_control implementations
for Exynos4210+ and Exynos5440.  Finally remove no longer needed
reg->tmu_[ctrl,inten], reg->inten_rise[0,1,2,3]_shift and
reg->inten_fall0_shift abstractions.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Factor out code for preparing TMU_CONTROL register value from
exynos_tmu_control() into get_con_reg().

This is a preparation for introducing per-SoC type tmu_control
method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Add ->tmu_initialize method to struct exynos_tmu_data and
use it in exynos_tmu_initialize().  Then add ->tmu_initialize
implementations for Exynos4210, Exynos4412+ and Exynos5440.
Finally remove no longer needed reg->threshold_th[0,1],
reg->intclr_[fall,rise]_shift and reg->intclr_[rise,fall]_mask
abstractions.

There are more improvements available in the future on top
of this patch like merging HW_TRIP level setting with setting
of other levels for Exynos4412+ or adding separate method
for clearing IRQs using INTCLEAR register (for Exynos5420,
Exynos5260 and Exynos4412+).

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Factor out code for preparing threshold register value from
exynos_tmu_initialize() into get_th_reg().

This is a preparation for introducing per-SoC type tmu_initialize
method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Factor out code for initializing data->temp_error[1,2] values
from exynos_tmu_initialize() into sanitize_temp_error().

This is a preparation for introducing per-SoC type tmu_initialize
method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Replace TMU_SUPPORT_TRIM_RELOAD flag check in exynos_tmu_initialize()
by an explicit check for a SoC type (only Exynos3250, Exynos4412 and
Exynos5250 have TMU_SUPPORT_READY_STATUS flag set in their struct
exynos_tmu_init_data instances).  Please note that this requires
adding separate SoC type for Exynos5420 so it doesn't get mistaken
with Exynos5250.

This is a preparation for introducing per-SoC type tmu_initialize
method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Replace TMU_SUPPORT_READY_STATUS flag check in
exynos_tmu_initialize() by an explicit check for a SoC type
(all SoC types except Exynos5440 have TMU_SUPPORT_READY_STATUS
flag set in their struct exynos_tmu_init_data instances).

This is a preparation for introducing per-SoC type tmu_initialize
method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Replace pdata->threshold_falling check for non-zero value in
exynos_tmu_initialize() by an explicit check for a SoC type
(all SoC types except Exynos5440 have pdata->threshold_falling
assigned to non-zero value in their struct exynos_tmu_registers
instances).

This is a preparation for introducing per-SoC type tmu_initialize
method.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Simplify HW_TRIP level setting in exynos_tmu_initialize() (don't
pretend that the current code is hardware and configuration
independent and just do SoC type check explicitly).  Then remove
no longer needed reg->threshold_[th2,th3_l0_shift] abstractions
(only assigned for Exynos5440 in exynos5440_tmu_registers) and
EXYNOS_MAX_TRIGGER_PER_REG define.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->tmu_pmin is set to non-zero value only for Exynos5440
so replace check for non-zero value of reg->tmu_pmin by
explicitly checking for Exynos5440 SoC type.  Then remove no
longer needed reg->tmu_pmin register abstraction.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->tmu_irqstatus is set to non-zero value only for Exynos5440
so replace check for non-zero value of reg->tmu_irqstatus by
explicitly checking for Exynos5440 SoC type.  Then remove no
longer needed reg->tmu_irqstatus register abstraction.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->emul_time_shift is used only in exynos_tmu_set_emulation()
and accessed only if TMU_SUPPORT_EMUL_TIME flag is set.  This
flag is not set for Exynos4210 and Exynos5440 (reg->emul_time_shift
field is not even assigned in exynos[4210,5440]_tmu_registers
and is assigned to identical value for all other SoC types) so
the abstraction is not needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->emul_temp_shift is used only in exynos_tmu_set_emulation()
and accessed only if TMU_SUPPORT_EMULATION flag is set.  This
flag is not set for Exynos4210 (reg->emul_temp_shift field is
not even assigned in exynos4210_tmu_registers and is assigned
to identical value for all other SoC types) so the abstraction
is not needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->therm_trip_en_shift is used only in exynos_tmu_initialize()
and not accessed on Exynos4210 (also reg->therm_trip_en_shift is
not even assigned in exynos4210_tmu_registers but it is assigned
to identical value for all other SoC types) so the register
abstraction is not needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->therm_trip_mode_shift and reg->therm_trip_mode_mask are
used only in exynos_tmu_control() and accessed only if
pdata->noise_cancel_mode is non-zero.  pdata->noise_cancel
field is not defined on Exynos4210 (also therm_trip_mode_shift
and therm_trip_mode_mask entries are not even assigned in
exynos4210_tmu_registers but they are assigned to identical
values for all other SoC types) so the abstractions are not
needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->test_mux_addr_shift is used only if pdata->test_mux is
non-zero.  pdata->test_mux is defined only on Exynos3250 and
Exynos4412 (other SoC types don't even have pdata->test_mux
entry assigned in their struct exynos_tmu_registers instances)
so the abstraction is not needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->triminfo_ctrl[] is used in only exynos_tmu_initialize() and
accessed only if TMU_SUPPORT_TRIM_RELOAD flag is set.  This flag
is set only on Exynos3250, Exynos4412 and Exynos5250 (other SoC
types don't even have triminfo_ctrl[] entries assigned in their
struct exynos_tmu_registers instances) so the register abstraction
is not needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->threshold_temp is used only in exynos_tmu_initialize() and
is accessed only on Exynos4210 (other SoC types don't even have
threshold_temp entry assigned in their struct exynos_tmu_registers
instances) so the register abstraction is not needed and can be
removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->tmu_status is used only in exynos_tmu_initialize() and it
is accessed only if TMU_SUPPORT_READY_STATUS flag is set.  This
flag is not set for Exynos5440 and TMU_STATUS register offset
is identical for all other SoC types so the abstraction is not
needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

reg->triminfo_data is used only in exynos_tmu_initialize() and
the code has already different paths for Exynos5440 and other
SoC types (on which TRIMINFO_DATA register offset is identical)
so the register abstraction is not needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Different drivers request API extensions in of-thermal. For this reason,
additional callbacks are required to fit the new drivers needs.

The current API implementation expects the registering sensor driver
to provide a get_temp and get_trend callbacks as function parameters.
As the amount of callbacks is growing, this patch changes the existing
implementation to use a .ops field to hold all the of thermal callbacks
to sensor drivers.

This patch also changes the existing of-thermal users to fit the new
API design. No functional change is introduced in this patch.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: lm-sensors@lm-sensors.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NMikko Perttunen <mikko.perttunen@kapsi.fi>
Reviewed-by: NMikko Perttunen <mikko.perttunen@kapsi.fi>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

This adds support for the Tegra SOCTHERM thermal sensing and management
system found in the Tegra124 system-on-chip. This initial driver supports
temperature polling for four thermal zones.
Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

This adds critical trip points to the Jetson TK1 device tree.
The device will do a controlled shutdown when either the CPU, GPU
or MEM thermal zone reaches 101 degrees Celsius.
Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

This adds the soctherm thermal sensing and management unit to the
Tegra124 device tree along with the four thermal zones corresponding
to the four thermal sensors provided by soctherm.
Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

This adds binding documentation and headers for the Tegra124
SOCTHERM device tree node.
Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NEduardo Valentin <edubezval@gmail.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

This patch introduces a new thermal cooling device based on common clock
framework. The original motivation to write this cooling device is to be
able to cool down thermal zones using clocks that feed co-processors, such
as GPUs, DSPs, Image Processing Co-processors, etc. But it is written
in a way that it can be used on top of any clock.

The implementation is pretty straight forward. The code creates
a thermal cooling device based on a pair of a struct device and a clock name.
The struct device is assumed to be usable by the OPP layer. The OPP layer
is used as source of the list of possible frequencies. The (cpufreq) frequency
table is then used as a map from frequencies to cooling states. Cooling
states are indexes to the frequency table.

The logic sits on top of common clock framework, specifically on clock
pre notifications. Any PRE_RATE_CHANGE is hijacked, and the transition is
only allowed when the new rate is within the thermal limit (cooling state -> freq).

When a thermal cooling device state transition is requested, the clock
is also checked to verify if the current clock rate is within the new
thermal limit.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Pull ARM SoC fixes from Olof Johansson:
 "Another small set of fixes:

   - some DT compatible typo fixes
   - irq setup fix dealing with irq storms on orion
   - i2c quirk generalization for mvebu
   - a handful of smaller fixes for OMAP
   - a couple of added file patterns for OMAP entries in MAINTAINERS"

* tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: at91/dt: Fix sama5d3x typos
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
  ARM: orion: Fix for certain sequence of request_irq can cause irq storm
  ARM: mvebu: armada xp: Generalize use of i2c quirk

Pull sparc fixes from David Miller:

 1) Fix NULL oops in Schizo PCI controller error handler.

 2) Fix race between xchg and other operations on 32-bit sparc, from
    Andreas Larsson.

 3) swab*() helpers need a dummy memory input operand to show data flow
    on 64-bit sparc.

 4) Fix RCU warnings due to missing irq_{enter,exit}() around
    generic_smp_call_function*() calls.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix constraints on swab helpers.
  sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locks
  sparc64: Do irq_{enter,exit}() around generic_smp_call_function*().
  sparc64: Fix crashes in schizo_pcierr_intr_other().

Pull md bugfix from Neil Brown:
 "One fix for md for 3.18.

  This fixes a regression introduced in 3.13"

* tag 'md/3.18-fix' of git://neil.brown.name/md:
  md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN

Some DT files had a typo with a missing "5" in sama5d3x first compatible string.
Signed-off-by: NPeter Rosin <peda@axentia.se>
[nicolas.ferre@atmel.com: modify commit log]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v3.18-rc4" from Tony Lindgren:

Few omap fixes for hangs and wrong pinctrl defines, and update
MAINTAINERS file to avoid missing PMIC and SoC related patches:

- Fix random hangs on am437x because of incorrect default
  value for the DDR regulator

- Fix wrong partition name for NAND on am335x-evm

- Fix wrong pinctrl defines for dra7xx

- Update maintainers entries for PMICs and SoCs

* tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge "mvebu fixes for v3.18" from Jason Cooper:

 - Armada XP
    - Generalize i2c quirk

 - orion
    - Fix irq storm caused by specific sequence of request_irq

* tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu:
  ARM: orion: Fix for certain sequence of request_irq can cause irq storm
  ARM: mvebu: armada xp: Generalize use of i2c quirk

md_check_recovery will skip any recovery and also clear
MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set.
So when we clear _FROZEN, we must set _NEEDED and ensure that
md_check_recovery gets run.
Otherwise we could miss out on something that is needed.

In particular, this can make it impossible to remove a
failed device from an array is the  'recovery-needed' processing
didn't happen.
Suitable for stable kernels since 3.13.

Cc: stable@vger.kernel.org (3.13+)
Reported-and-tested-by: NJoe Lawrence <joe.lawrence@stratus.com>
Fixes: 30b8feb7Signed-off-by: NNeilBrown <neilb@suse.de>

We are reading the memory location, so we have to have a memory
constraint in there purely for the sake of showing the data flow
to the compiler.
Reported-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>